HONDA SWAPPED LAMBORGHINI... Building the front suspension from scratch

Поділитися
Вставка
  • Опубліковано 18 вер 2024
  • Hey guys and gals welcome back. i thought i would make this a bit more detailed being custom suspension. i feel like the suspension will be a series on its own. hopefully we can dial this bad boy in and not take to long!
    hope you enjoy
    don't forget to help me out and like comment and subscribe!
    thanks guys and gals

КОМЕНТАРІ • 43

  • @andrewthompson7793
    @andrewthompson7793 День тому +3

    Just binge watched all the lambo videos great job. Nice to see someone using their head instead of check book 👍

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@andrewthompson7793 thanks mate glad you like them!.

    • @kylereese4822
      @kylereese4822 17 годин тому

      @@BIFIRI_97 Next Lambo conversion - Hyundai N spec motors, batteries ect including that dash/screen... ??

    • @kylereese4822
      @kylereese4822 17 годин тому

      @@BIFIRI_97 I wonder if you could get the 5 battery modules from a Model S Plaid 1 in the middle(new floor/battery box) 3 vertical behind the rear bulk head and one horizontal above the motor each module is about 48 inches long x ? wide(measurements based on images only)... plaid motors all 3 ....

    • @kylereese4822
      @kylereese4822 17 годин тому

      @@BIFIRI_97 Oh imagine finding a Peugeot 205 mid engine 4wd Group B road going rally car transmission fitted to the Honda engine thus reinstating 4wd.... :)

  • @dan5her
    @dan5her 2 дні тому +2

    Just what I needed

  • @speedwayengineering457
    @speedwayengineering457 День тому +2

    Amazing project 🎉

    • @BIFIRI_97
      @BIFIRI_97  День тому

      @@speedwayengineering457 thanks mate. Its a big one haha

  • @MichaelBLevi
    @MichaelBLevi День тому +2

    A proper new project to follow!
    Best of luck to you👊

    • @BIFIRI_97
      @BIFIRI_97  День тому

      @@MichaelBLevi thank you sir! Muchly appreciated

  • @nathanknight8022
    @nathanknight8022 День тому +2

    Great job dude, still a long way to go. I can't wait to watch the next 50 videos 😁

    • @BIFIRI_97
      @BIFIRI_97  День тому

      @@nathanknight8022 thanks mate! Sooo many videos. Thanks alot!

  • @Murphyslawfarm
    @Murphyslawfarm День тому +1

    G'day white and grey will look wicked mate. Maybe a Honda white 🤔

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@Murphyslawfarm thank you mate! I think so to!

  • @StoneKing3D
    @StoneKing3D День тому +1

    Bery Naissssss

  • @melbgrk6725
    @melbgrk6725 День тому +1

    Awesome project mate ... keep at it :)

  • @devonmartinbasson
    @devonmartinbasson 2 дні тому +3

    That's top notch work. Also maybe i missed it but why not use Audi R8 front suspension parts?

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@devonmartinbasson thank you sir! Being a world time attack racecar we need all the adjustment we can. And building custom wishbones with heims you have alot more adjustment than a fixed factory wishbone. I am able to change track width if beed be and also the camber either ontop or the bottom. Thanks for watching

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@devonmartinbasson oh and this is also alot cheaper for me!

    • @devonmartinbasson
      @devonmartinbasson День тому +1

      @@BIFIRI_97 ah ok, thanks for explaining! looking forward to seeing it done 😎

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@devonmartinbasson its ok. I will be buying R8 coilovers though 🤣

  • @UKBUILT
    @UKBUILT 20 годин тому

    Keep up the good work 😍

  • @ChinthakaVeneno
    @ChinthakaVeneno День тому +3

    Are u going to do widebody ?

    • @BIFIRI_97
      @BIFIRI_97  День тому +2

      @@ChinthakaVeneno it may turn into a wide body. But only slightly.

  • @carbonfiber8071
    @carbonfiber8071 День тому +1

    Good progress there. What brakes are you going to use?

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@carbonfiber8071 thanks alot! I found some aftermarket brakes. They are a cheaper set so i am not sure how they will go. But it will be a start. Can always upgrade or change if they are no good.

  • @fastfactorysouthafrica5423
    @fastfactorysouthafrica5423 День тому +1

    😎💯👌🏼🎉

  • @ChinthakaVeneno
    @ChinthakaVeneno День тому +2

    Are u going install supertrofeo front fender ?

    • @BIFIRI_97
      @BIFIRI_97  День тому +2

      @@ChinthakaVeneno i am buioding custom fenders

    • @ChinthakaVeneno
      @ChinthakaVeneno День тому +1

      @@BIFIRI_97 love it

  • @antonvalchev6653
    @antonvalchev6653 День тому

    Bro if that car is not show car and don’t weigh 600kg this suspension aluminum mounts will snap immediately!

    • @BIFIRI_97
      @BIFIRI_97  День тому +1

      @@antonvalchev6653 it will be both. Designing and fabricating new things can have its problems. I am pretty confident that these mounts will do there job. Each mount will take around 70kg and then add in some force from braking and cornering it might double. It is always in the back of my mind if it will do its job or not. I would not do somthing if i didnt think it would work. But there is always a chance it could fail. Hang around and find out!

    • @UKBUILT
      @UKBUILT 20 годин тому +1

      I think it will be plenty strong enough. I doubt any of that will snap. Worse case the aluminium may be to soft and the holes elongate but I doubt it would be a structural failure 👍 Just my 2 cents 😎

  • @type64jj
    @type64jj День тому +1

    Why ! Why! Why! If lambo sold a 4cylinder car they would go broke . Porsche tried with the kayman and flopped ! Use your talents to build something that is not a oddball just for the sake of building a oddball !

    • @BIFIRI_97
      @BIFIRI_97  День тому

      @@type64jj thanks for your thoughts mate. Follow along and find out why 😃

    • @TMR_
      @TMR_ День тому +1

      K SWAP THE WORLD! That's why!

    • @UKBUILT
      @UKBUILT 20 годин тому +2

      Because it's good to be different 💪 This should be an awesome time attack car. More power than the stock v10 but way lighter.

    • @type64jj
      @type64jj 14 годин тому

      @@UKBUILT The world is convinced being different is great ! How is that working out for you in the uk ? If it is so awesome why isnt every manufacturer doing it ? You tube is just making people make bad choices just or clicks and likes.

    • @BIFIRI_97
      @BIFIRI_97  8 годин тому +1

      @@type64jj i will let you in on a little secret. This is my dream car. I cannot buy a new one. I had to buy a wreck and bring it back from the dead. I have to build fabricate most of the car. A honda k20 built properly can produce 3 times the power of a stock v10 lamborghini engine for this model. And for a fraction of the price. A world time attack car is a race car and highly modified at that. If its not your thing thats cool. I am definitely not going threw all of this just for clicks and likes. I am a ordinary bloke with a wife and kids.