5:14, if you put a plastic/cardboard circular sheet as a disc at the beginning of the plastic rod that can ensure that the cement/brick dust doesn't come out randomly and on face 😎 I use that improvisation to ensure all dust goes directly down!!! or small round plastic brushes will also clean everything . Also 7:35 a trick that I follow is put one turn of electrical insulation tape on the spring that will ensure spring never moves and has always worked for me - maybe it helps all too😀
Thank u brother bohot achy sy guide kea , me smallest bolt search kr raha tha , mere ghr mein pardy seqrew ki madad sy lagy hoey han but 2 braket free ho k bahir nikl aey han to souch raha tha k yahan rawal bolt hona chaey to app ny mere leay asaan kr dea thanks ... keep posting
video banao tao asa wala,mast video,Bo v ground level se lekar full informative video🥳🥳🥳😊😊🤝🤝🤝🤝🤝🤝🤝am supporting u....... excellent effort #indianleolion
@ wall of red brick.i got m10 bolt for pull up bar . 6 no’s m10 bolts ,three on each side . Well the carpenter said it might come off as it can’t get grip in red brick that it is primarily used in concrete slab.if i can’t use m10 which one would be better to use
Yes. He said right. Here's my take on it. Use m10 pin anchors on each side. Minimum length if anchor should be 4 or 5 inches. Dont use RAWL Bolts. They will come off along with bricks. Please test after installation. Walls can come off if there is no enough patchup between the top layer of bricks and the plinth/ceiling beam. Only pullups and no calisthenics.
Excellent video, I am currently living in a rented flat where I want install pull up bar for exercise using strong wall anchor bolts that can withstand heavy load but at the same time I should be able to remove those anchor bolts once my lease agreement it over else owner of the flat will charge hefty amount from my deposit or won't even return any deposit amount at all, can you plz suggest which specific type of wall anchor bolt should I go with in this regards ?
by the time I am giving you a reply.......the agreement might have been ended. In you case, you should not use pin anchor. RAWL is fine. It is 90% removable.
Sir 5 inch ki deewar mein kitne mm ka i bolt fastener lagana chahiye.. 10 mm (M10) chal jayega kya ya phir 8 Mm lagaye.. Pull up bar lagani hai and Kapde sukhane k liye taar bhi lagana hai..
@@mechanified-hindi Ha sir deewar eeit ki hai and 5 inch width hai uski.. Then pull up bar na lagaye kya uspar? Ya usme bhi 8 mm wale fastener chal sakte h? Dono side 2-2 lagenge
Sir aap agar dono side bhi lagaoge, lekin pullup ka load ek hi side padegana? Better look for other types homegymshed.com/pull-up-bar-types-home-workout/
Sir Bosch GBH 2-26 DRE AND, BOSCH GBH 220 mein kaunsi best hai machine jisse aage tak sab kaam ho jaye.. Mere pas already GSB10 RE hai but uski bit capacity 10 mm tak ki hai.. Usse saare kaam nahi ho pate.. Please suggest the best one mijhe apne personal use k liye chahiye k sab kaam ho jaye usse aaram se.. Mujhe GBH 220 jyada samajh aa raha hai, baki aap jaisa kahenge vhi lunga.. Ha deewar m chalaunga, fastener vagarah sab lag jaya kare aaram se usse sab chhote bade kaam ho naye jarurat padne par and lena bosch ka hi hai..
Sir 10 mm I bolt fastener k liye 14 mm bit use hogi ya 16 mm please confirm the correct bit size? Bahut logo ne 14 mm bola hai bahuto ne 16 mm bola hai, correct size kya use hoga? Please reply
Sir aapne bataya tha 10 mm ke fastener mein 16 mm ka bit chalega, maine try kiya but hole bada ho gaya loose aa raha tha fastener usme Then dusra fastener lagane mein 14 mm ka hole kiya usme theek aya M10 fastener.. Please give correct sizes. I used Bosch original drill bit..
Sorry Sir, I recently understood that manufacturers make different sizes. The one I have needs 16mm. In general, check in google for '10mm rawl bolt drill size' It will say 16mm
@@mechanified-hindi sure sir I'll send And google par information accurate ho koi guarantee nhih, isiliye people look for expert's advise on such platforms
5:14, if you put a plastic/cardboard circular sheet as a disc at the beginning of the plastic rod that can ensure that the cement/brick dust doesn't come out randomly and on face 😎 I use that improvisation to ensure all dust goes directly down!!! or small round plastic brushes will also clean everything . Also 7:35 a trick that I follow is put one turn of electrical insulation tape on the spring that will ensure spring never moves and has always worked for me - maybe it helps all too😀
Thanks for the tip man
I was ready to sub your channel but there's no content
Thank u brother bohot achy sy guide kea , me smallest bolt search kr raha tha , mere ghr mein pardy seqrew ki madad sy lagy hoey han but 2 braket free ho k bahir nikl aey han to souch raha tha k yahan rawal bolt hona chaey to app ny mere leay asaan kr dea thanks ... keep posting
The way you describe it is amazing ...Glad to see ur demonstrated🥰
सबसे बेस्ट explain video hoti hai आपकी भाई
Awesome video, sab kuch kitne achche se detailed mein explain kiya hai.. Sabse badiya video... very best..
Thank you bhai
you are speaking good in Hindi. Tks for sharing knowledge.
क्या बात है पूरी जानकारी दी है 👍
Well done bhaii 👍🏻.. liked..
M8 Rawl bolt fastener ke liye 12mm drill bit ya 14mm bit sahi hoga??
14 mein aap rawl ko nikal bhi sakte ho. RAWL ko expand hone keliye bhi jagah chaiye. 12 mein jagah nahi hai utna
Vah sar sab mein number van video app ka❤
🥱🥱🥱🥱🤔🤔🤔🤔🥵🥵🥵 i lost too many in the 🧱 wall now get idea will never lost again good job (from Pakistan)
Khatarnak video banaya aapne ❤
You have explained very good.
Kyaa baat sir bohot bahtreen video thanks helpful video bohot bohot dhanyavaad sir👍🙏
Aapke comment keliye bhi thank you
Yeh cheej bohut achi chej hai, laganey keliey
Good Job And Best Explanation.
उपयोगी जानकरी।धन्यवाद।
zabardast video hai bhai - pura fadh dala
Teri toh nahi fat gai
@@atheist3111 meri nahin fati mein fadta hoon
Good interaction & Good Speech &photography
Thank you
👍good explanation
बेहतरीन वीडियो ।
धन्यवाद °®
Sir ... Aap itne mahino se kaha the... Itne dino bad video banaya
Ab se regular rahenge bhai.... Hafte mein 1 video zaroor dalenge
@@mechanified-hindi ok..sirjeee
Good Work Help Full 🎉🎉🎉
Amazing.. beautifully demonstrated
बहुत अच्छी जानकारी दी है आपने
video banao tao asa wala,mast video,Bo v ground level se lekar full informative video🥳🥳🥳😊😊🤝🤝🤝🤝🤝🤝🤝am supporting u.......
excellent effort #indianleolion
धन्यवाद भाई 🙏🙏❤️
very good information is shared and nicely explained.... Please keep posting such videos.
🙏
पसन्द आया भाई धन्यवाद जी 👍❤️🇮🇳👍
Bahr nikalne ka method 👏👍👌
doesnot work if hole is too tight
Baht achha bataya, very nice
شکریہ جناب 🌹 👍👍
Nice Information Ji..
Good hogya Bhai g
Sir,Achha drill machine kaun sa rahega.
what drill machine are you using
26mm hammer
M12 ke liye Drill bit 18mm chalega?
20ka chahiye... Sir aap measure karke hi dekhiye...
Tight nahi hona chahiye
Can we use m10 bolt in 9 inch wall
Wall made of what?
Depends on how much load you hang.
@ wall of red brick.i got m10 bolt for pull up bar . 6 no’s m10 bolts ,three on each side . Well the carpenter said it might come off as it can’t get grip in red brick that it is primarily used in concrete slab.if i can’t use m10 which one would be better to use
Yes. He said right. Here's my take on it.
Use m10 pin anchors on each side. Minimum length if anchor should be 4 or 5 inches.
Dont use RAWL Bolts. They will come off along with bricks.
Please test after installation. Walls can come off if there is no enough patchup between the top layer of bricks and the plinth/ceiling beam.
Only pullups and no calisthenics.
अच्छी जानकारी.धन्यवाद.
Bahot Badhiya
Very helpful celing fan fit karne ke liye Ketna mm anchor bolt lena chaheya
Go with d hook with two 10 mm pin Anchors
Bhai, gym ka pull up bar laganey k liye kaunsa, bolts accha rhega
pin achor kaafi hai.........agar pull up bar online se liya hai to.....kyun ki usme plate rehta hai
Bhai solar stand ke liye kounsa fastener lagaaye nail wala ya Rawal wala .
chath pe lagarahe?
without lintel wala wall me install kar sakte hai nai m10 rawl bolts..wall thickness 5 inch hai..please answer
What will you suspend?
Rawl is not good option for non concrete walls
@@mechanified-hindi What is alternative of rawl m10 for pushup bar un hollow brick wall of 4 to 6 inch??
Excellent explanation
Excellent video, I am currently living in a rented flat where I want install pull up bar for exercise using strong wall anchor bolts that can withstand heavy load but at the same time I should be able to remove those anchor bolts once my lease agreement it over else owner of the flat will charge hefty amount from my deposit or won't even return any deposit amount at all, can you plz suggest which specific type of wall anchor bolt should I go with in this regards ?
by the time I am giving you a reply.......the agreement might have been ended.
In you case, you should not use pin anchor. RAWL is fine. It is 90% removable.
Sir wedge anchor installation par kabhi video banaiye koi..
Ji sir...
Ye rawl bolt swing ke liye use kar sakte hai?
Sure... Use some locktite or epoxy....
Thank you bro... But swing bada hai... Kya yeh 100 to 150kg weight handle karega?
Use M12 to be on safer side. Single m12 eye rawl will hold atleast 300kgs (bare minimum).
@@mechanified-hindi m12 mathlab sir
12mm wala sir jisko bitane keliye 20mm ka ched lagta hai
Super video ji, useful tips for is
Thank you ji
Beneficial video. Thanks for sharing.
Bathroom tile me wash basin vanity taangne ke liye kya best rhega?
Sir, multiple options. Either sds on normal mode, or glass drill bit or tile bit. Please use water
Already liked and subscribed your channel. Thank you.
Kahi cilling fan lagane ke liye huk nahi laga hai , aur hame waha cilling fan lagana hai to kya ham eye bolt cilling me laga ke fan laga sakte hai.
Sure sir, aap eye bolt laga sakte hein. Yaad se usme epoxy/thread lock lagayen.
Nahi to aap D hook lagayen, 2 pin anchor ke saath
Bhai big size Tv ka wall mount ko bar fastner se kaise fix karte hai aisa video banao aap
I have made video about pin anchors
sir pop me laga sakte hai kya
pop haath mein aayega
Is ancho hook ko ceiling fan k liye use kar sakte hain? M seal se chipkaya to kitne salo taak tikega??
Usko mitti pakadke tutne tak aayega.
@@mechanified-hindi sorry samjha nehi..How long it will last?
Excellent 🙏🙏🙏🙏🙏
bahut badiya
Nice dear
Sir Jiiii Hammer Drill machine konsa hai
Aimex ka. Review banaya hai
Sir 5 inch ki deewar mein kitne mm ka i bolt fastener lagana chahiye.. 10 mm (M10) chal jayega kya ya phir 8 Mm lagaye..
Pull up bar lagani hai and Kapde sukhane k liye taar bhi lagana hai..
Width of wall just 5 inch?
Kapde sukhnae keliye aap 8mm laga sakte hein.
Deewar eete ki hai? Pull up bar se kahi deewar na gir jaye?
@@mechanified-hindi Ha sir deewar eeit ki hai and 5 inch width hai uski.. Then pull up bar na lagaye kya uspar? Ya usme bhi 8 mm wale fastener chal sakte h? Dono side 2-2 lagenge
Sir aap agar dono side bhi lagaoge, lekin pullup ka load ek hi side padegana?
Better look for other types homegymshed.com/pull-up-bar-types-home-workout/
Good teach you
Isko pull bar k liye use kar sakte h kya, 100kg capacity k liye?
yes.......agar online mein liya pull up bar hai to
Rawl Bolt 🔩 kya tilas ki reling par kaam kar jayega sir
yes.....make sure tile wont break
Thank you, Sir. Very useful info.
Thank you very much for in details
Nicely explained thanks, keep the good work
Kya isse celling fan jhulane me koi risk hai?
Sir, better use D hook. It will never fall off
Sir, your videos are amazing. Thank you !
Very nice useful
And sir mujhe ek drill machine lena hai bosch ka, best all purpose drill machine model kaunsa acha rahega bosch mein..
Deewar me chalaoge sir?
Agar chota mota deewar ka kaam hai to koi bhi basic lelo. smartdiyer.co.in
Sir Bosch GBH 2-26 DRE AND, BOSCH GBH 220 mein kaunsi best hai machine jisse aage tak sab kaam ho jaye..
Mere pas already GSB10 RE hai but uski bit capacity 10 mm tak ki hai..
Usse saare kaam nahi ho pate..
Please suggest the best one mijhe apne personal use k liye chahiye k sab kaam ho jaye usse aaram se..
Mujhe GBH 220 jyada samajh aa raha hai, baki aap jaisa kahenge vhi lunga..
Ha deewar m chalaunga, fastener vagarah sab lag jaya kare aaram se usse sab chhote bade kaam ho naye jarurat padne par and lena bosch ka hi hai..
Bosch GSB 2-26 DRE lena agar budget hai to.
Nahi to cheaper 26mm bahut kaafi hai personal use keliye
Good video 📸📸
Thanks man
अच्छा ड्रिल मशीन कौन सा रहेगा।
kaam kya hai sir?
Thanku sir very nice
Very nice
10mm Rawl bolt kitna weight utha sakta he
Fix answer nahi.....jis deewar pe lagate ho usko bhi dekhlo
6 mm ke rawal ke liye 6mm ka dril kyo nahi use kar sakte batao pls
Bhai.... Uska shell bada hai na... Isiye.
Sirf bolt ka size likha rehta hai. RAWL ka nahi
Ok bhai
Good 👍😊 sir ji good
Good morning. I have made a deeper hole than the rawl bolt as a result it is not catching. What to do in such a situation
fill it...no other option
Thanks you sir good
Acha video
Thanks🙏🙏🙏
Oxygen cylinder Kya Kam
Argon ka cylinder
Nice information sir but 1question h. Mera
Thanks ji... Puchiye....
इसमें सीलिंग पंखा लटका सकते हैं क्या?
Sure
Kidhar melega aa products
Sir, local market mein. Sasta milega.
Is par kitna weight de sakte hai
Aisa koi fixed answer nahi hai. Kyun ki jaha pe hum lagate hein, surface material ke upar depend hai. ki load lega ki nahi
Sir, which state are you from? I guess TN or Andhra.
KA
@@mechanified-hindi Karnataka or Kerala?
KA- Karnataka
KL- Kerala
@@mechanified-hindi 😀
Your Hindi is very good. I am from Nepal.
Eye bolt ceiling fan lagana sahi and safe hoga ? Or ceiling mei lagane se pehle araldite apply karna hoga kya rawl bolt k body pe ?
Exactly. Apply any epoxy or thread locker.
Best suitable fastener for fan is D hook
Ye jhula tangne wala nat samaj me aaraha hai lekin ye normal inko kaha aur kis liye istemal karte hai
round wala RAWL
Thanks bro
Nice video
thanks.. 🙂
Thankyou sir
Nice
इसके लिए कितना mm का ड्रिल बिट लेना चाहिए, जरूर बताइये
smartdiyer.com/types-of-anchor-fasteners/
Why to use 16 mm bit for 10 mm rawl plug
Depends on size of plug. 16mm is standard. 14mm is also used.
Thanks nice
Sir 10 mm I bolt fastener k liye 14 mm bit use hogi ya 16 mm please confirm the correct bit size?
Bahut logo ne 14 mm bola hai bahuto ne 16 mm bola hai, correct size kya use hoga?
Please reply
Sir 10mm ke rawl (bolt and eye hook) keliye 16mm lagta hai.
14mm is for 8mm rawl.
smartdiyer.com/types-of-anchor-fasteners
Sir aapne bataya tha 10 mm ke fastener mein 16 mm ka bit chalega, maine try kiya but hole bada ho gaya loose aa raha tha fastener usme
Then dusra fastener lagane mein 14 mm ka hole kiya usme theek aya M10 fastener..
Please give correct sizes.
I used Bosch original drill bit..
Sorry Sir, I recently understood that manufacturers make different sizes. The one I have needs 16mm.
In general, check in google for '10mm rawl bolt drill size'
It will say 16mm
Can you please send a photo of it (if possible) to my email, smartdiyer@gmail.com
@@mechanified-hindi sure sir I'll send
And google par information accurate ho koi guarantee nhih, isiliye people look for expert's advise on such platforms
Yes I understand. But according to Metric standards, its 16mm for 10mm. I will mention this in future. Thanks for mentioning this
Best
Bada wala fasteners chahie kaise mela ga
local market sir