How To Replace Rear Brakes 1992-99 GMC K1500
Вставка
- Опубліковано 4 жов 2024
- Buy Now!
New Brake Shoe & Drum Kit from 1AAuto.com 1aau.to/ia/1ABD...
Brake shoes wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake drums may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace shoes and drums at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ shoes and drums on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oarX/1A...
• Pry Bar 1aau.to/oiN/1AX...
• 22mm Socket 1aau.to/ocE/1AX...
• Needle nose pliers 1aau.to/oow/1AX...
• Needle nose pliers 1aau.to/oow/1AX...
• Straight Cutters
• Ratchet 1aau.to/oatR/1A...
• Socket Driver
• Socket Extensions 1aau.to/oace/1A...
• Torque Wrench 1aau.to/ox3/1AX...
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oit/1AX...
• Center Punch 1aau.to/oc6/1AX...
• Floor Jack 1aau.to/owr/1AX...
• Hammer 1aau.to/onP/1AX...
• Jack Stands 1aau.to/owF/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/ofk/1AX...
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Legitimately came in clutch, gotta pay attention to this mans technique thats the real key
Best video for this job. Couldn't have done it without it.
Good job! Camera work was hit and miss at first ... then improved through the video to excellent. Very helpful tutorial ...thanks!
Taking the retainer springs off and back on sure is easier with the proper tool! I learned from experience.
How did the back plates get so clean? Special cleaning or replacement? Getting ready to change out my 1995 K1500 rear brakes as I am not sure they have every been replaced and this video is very helpful. Thanks! Also it would be good to note these are the 10 inch rear brakes in the video as the 11.25 rear brakes are slightly different.
Great job great video Excellent directions thank you so much
5:28 best part
That spring at 4:11 is the biggest pain in my ssa to put back on I see why you skipped till when it was on cause ik it took a second 😂
Im so glad i found this video this was a big help.
+erichoward09 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Look at all that rust! That trucks is definitely up north!
+Tedd Rosenthal Thanks for watching our video! Our video studio is based out of Massachusetts. 1aau.to/m/Shop-TRQ
Thank you for the great video! Very helpful and informative
I'm guessing you blead the brakes because you replaced the backplate? Cause I don't see a reason if it was just a brake pad/arm replacement.
I use a piece of small clear hose on the bleeder fitting going into a bottle to capture the fluid while bleeding brakes. Getting brake fluid all over sucks
+Chris V Thanks for the tip! 1aau.to/m/Shop-TRQ
Sure wished you included changing backing plates in your very good video !!!!! My truck needs backing plates too .......
+Cat Dakman Thanks for the feedback!
Great instructional video. Everything is clear to see and thoroughly explained.
Can you please tell me if these were 10" or 11" brakes.
Great work!! 👌
I agree with a new video. You performed quite a few operations that were hidden behind other parts. A REAL PRO would have shot the scene AGAIN from the back side where things weren't hidden, then continued..... Otherwise, all good. This had me scared, now I feel a bit better if I could do them. I don't know what my size is - 10 or 11.5.....
pretty cool video. thanks man.
Thank you❤
Mine has 5 springs and looks different
Do you know that there’s spring removal tool for all that stuff
+Leif Erickson Thanks for the feedback! 1aau.to/m/Shop-TRQ
Do you know I saved $35 for using pliers instead of the removal tool for all that stuff
Thanks
do you guys have the parking brake lever that the parking brake attaches too available?
Can you guys do a better job of filming and showing things and explaining them as you go. It was very vague video, moved way too fast
E break spring will not go back for me to get it on just pliers are not cutting it what can I do???
Why skip when you put the new assembly on
What’s that copper spray
He literally said it was copper anti seize
Should have sprayed it down with brake cleaner before working on it. Poisonous brake dust.. Safety First.?
He's wearing gloves
My boy had the ling long tires 😮😂😂😂😂
You forgot to flip this
+Chris Crowley Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
Every time I pause I have to watch two ads. Pissing me off
Helpful hint, some of us use earbuds, so, when you blast your air tools, I yank my earbuds out. End of your video for me.
+Tedd Rosenthal Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
Same here, a little volume leveling would be helpful.
LMAO when you get done crying that river go ahead and build yourself a bridge and get over it
@@3ormorecharacterstimes2 lmao exactly
Got them ling longs