I know im asking randomly but does anybody know a trick to get back into an Instagram account?? I stupidly forgot the account password. I would appreciate any tricks you can offer me.
Excellent video! ,very clean and no extra BS just the right way to get it done. Thanks for the great video ill be doing this project in the next few days
So I just ordered a tie rod kit from you guys but I noticed that in your how to video that you don’t show us how to pack them with grease being that these do not have zerk fittings why?
All very nice except >>>>>> You measured outside joint to outside joint. Depending on Brands, that measurement may vary greatly. Try measuring from center to center of the ball joint for better accuracy!
Regardless of what make of car/truck. When you replace rods they should be the same as previous rods. So it doesn't make a difference. Measuring eye to eye is what is said to be more specific, but i disagree because the tie rods are usually not perpendicular to each other so measuring eye to eye is more of a ballpark measurement. Besides you're going to take vehicle for alignment.
Sleeve opening should be 90° off of from sleeve clamps that hold it together, having them all same direction weakens joint l, especially in offroad application
+Chase Grote Thanks for watching! The install should be the same or similar for a 1988-2002 Chevy K1500. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
Seek Jesus! Repent for the Kingdom is at hand! Jesus is the way! The truth! And the life! He’s the ONLY way! Open the Bible, read and understand that we are in the last days! Put your full trust in him! Believe 1 Corinthians 15 1-4!
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I know im asking randomly but does anybody know a trick to get back into an Instagram account??
I stupidly forgot the account password. I would appreciate any tricks you can offer me.
This way makes more sense than counting threads.
Great info. Fast and straight to the point. Along with specs to torque bolts. Perfect
Excellent video! ,very clean and no extra BS just the right way to get it done.
Thanks for the great video ill be doing this project in the next few days
So I just ordered a tie rod kit from you guys but I noticed that in your how to video that you don’t show us how to pack them with grease being that these do not have zerk fittings why?
All very nice except >>>>>> You measured outside joint to outside joint. Depending on Brands, that measurement may vary greatly. Try measuring from center to center of the ball joint for better accuracy!
Regardless of what make of car/truck. When you replace rods they should be the same as previous rods. So it doesn't make a difference. Measuring eye to eye is what is said to be more specific, but i disagree because the tie rods are usually not perpendicular to each other so measuring eye to eye is more of a ballpark measurement. Besides you're going to take vehicle for alignment.
I agree.
What's a veericle
I knew I wasn’t the only one who knows he said it differently 😂
Sleeve opening should be 90° off of from sleeve clamps that hold it together, having them all same direction weakens joint l, especially in offroad application
What about the locking nut that came with mine does it matter if its on the inner or outer
Website says fits Chevy c1500 is it same for k1500?
Would you like some truck with that rust? Glad I live in the south.
Might as well replaced all the suspension components....damn all that rust.!!
Lol i thought mine was bad, this makes mine look like it came out of the factory
Thank god I live in Texas all that rust
Lol same
Beating the rust off it 🤣
Veericle
Is it possible to remove the inner tie rod without damaging it? I want to transfer it to a other vehicle.
Very informative !
Counter an clockwise for the rod ends When putting them on the sleeve Both sides do not go on the same way
No grease injection?
That's what I just saw on mine that I ordered has no regrease nipple? No wonder there cheap
My inners are seized in, do you have a vid on a good tool to get them out. I broke a cheap autozone tool trying to remove them. 94 k1500.
Did you ever get it out? What did it take do so?
Safely raised the vericle
I’ve been looking for heavy duty tie rods and adjusters for this body style but can’t find anything
Probably too late but look at rockauto
Mevotech do heavy duty ones
@@jessegale5559 kryptonite has some beefy ones to
Is this the same as on a 1994 chevy g30?
Yes currently doing a g30 its about the same order tierods and tierod adjuster (the center piece)
I just put the trq tie rods on my truck
Great video
Thanks
Now wait a minute give me a video on that sleeve he said do not put it on that side he said turn around and put on the other side, so which one is it?
Outstanding
Would a 88-02 chevy k1500 be the same steps?
+Chase Grote Thanks for watching! The install should be the same or similar for a 1988-2002 Chevy K1500. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
I believe this was a K1500. You can see the drive axle and boot.
👍
Seek Jesus! Repent for the Kingdom is at hand! Jesus is the way! The truth! And the life! He’s the ONLY way! Open the Bible, read and understand that we are in the last days! Put your full trust in him! Believe 1 Corinthians 15 1-4!
Damn that trucks under carriage is rusty
LingLong tires haha