EP.11 | Clearview Lids Pisces EXO
Вставка
- Опубліковано 21 сер 2024
- Lets check out the new Pisces EXO Lid... no more fish jumping in the JBJ !
JBJ 65 exact lid measurement:
35 1/4" x 15 3/16"
Find thier Lids here: www.clearviewl...
Equipment List:
Aquarium Hose Holder:
amzn.to/2GboAt1
Here’s the 65G JBJ:
bit.ly/2Gajtt0
** Aquamaxx T1 Calcium Reactor Setup **
AquaMaxx cTech T-1 Calcuim Reactor: bit.ly/2EW7JrK
AquaMaxx Dual Guage Professional CO2 Regulator: bit.ly/2DncQRC
CaribSea Aragonite Calcium Reactor Media: bit.ly/2DwYCks
Brightwell Aquatics NeoMag: bit.ly/2DlhHTl
5Lbs Co2 Canister: bit.ly/2DRDkLY
** tank Controller **
Neptune Apex 2016: bit.ly/2DrxLaf
Finnex 200w Digital heater:
amzn.to/2X9DaYM
Cadlights PLS 50 Elite II Skimmer:
amzn.to/2GlpLaj
Maxspect Gyre 330:
amzn.to/2UgQ8lx
ICV6 Controller:
amzn.to/2DmgKMu
Santa Montica Hog1 Algae Scrubber:
bit.ly/2XaVGjj
Vectron UV Sterlizer:
bit.ly/2VJNOVQ
Sechem Pond Matrix Bio Media:
amzn.to/2UYa69g
#JBJ65Challenge #2019reefbuild
This is a DOPE screen top! I’m never gonna take it off. Being able to stock the JBJ worrie free is gonna be a major 🔑. Let me know you guys thought on this in the comments. Keep doing what y’all do! 😎💯
JBJ 65 exact lid measurement:
35 1/4" x 15 3/16"
Lid info is here:
www.clearviewlids.com/
Nice lid cj very clean ✂ i would check youre light levels make sure nothing change with that plexy on it wrong plexy would bounce youre light off difrent ways i noticed that on my 120 when i put lids on but then there was more plexy covering tank than youres found out wrong plexy glass they used to make them lids so just took them off
CJ: *adds* *screen* *top*
“No more fish suicides*
Inappropriate Reefer:
*Am* *I* *a* *joke* *to* *you*
The tank is coming along great
Tank is looking good man! Glad to have you back in the Hobbie. I always enjoy watching your builds. Super informative and detailed. Can't wait to see what you plan on stocking it with!
Just installed one of their lids. perfect!
They are awesome and they last forever
Sweet looking lid, well thought out 👍
Oh, this is almost exactly what I've been looking for. I make homemade screen tops for my planted freshwater tanks, but I've never been quite satisfied. These lids look great, especially with the custom cutouts. Thanks for the lead!
What a great addition I’m planning a 150 rimless build and I had no idea they made lids like that so thanks for the great video
I love my clearview lid - I clean it with the hand-held shower spray head. Mine is 2 years old now, and still looks pretty much brand new when it’s clean. I had them put in 2 feed doors and can’t imagine working without them. And I only ever remove it for cleaning or, like you said, for when I need to reach into the tank. Nice choice, you won’t regret it!
Keep the lid for the first couple of weeks after you put the fish! Once they're acclimated and there are no fight, I'm pretty sure they won't jump at all! I have 2 wrasses. It's been almost two years and they're doing just fine without lids. Actually, they don't even like to stay close to the surface!
Man I haven't watched in a while. Your tank looks top notch! What happened to the sca 120? Great video
ordered this lid for redsea reefer 525 so pumped. long wait for one of these almost 2 months
I feel like a lid is a must have when it comes to aquariums. I also like the mesh lid more than a glass one.
Great looking lid. Can't wait to see those wrasses! That shrimp is a soldier! 💪
Very clean looking lid. I wish I would have gone with one like that for my tank. I’ll get one of those when I replace mine in the future.
Love your channel! I have watched all your videos on editing and use your tips all the time on my videos! Thanks for the inspiration! Hopefully one day my tank will make it to the appetizer series!
Appleton wi here, Love the Packer poster! Had Ty Montgomery on our softball team before he got traded, also love the videos
Looks good. I'll always have a lid if theres at least 1 fish. Cant wait for the fish to be added
Love that lid. I'm hoping I can find a lid like that for the 75. Great video...
Looks great! I love my ClearView lid. A little pricey but worth every penny!
Those lids are nice! Without a lid = dead fish. Always have a screen on my tank.
Won't lie to you, I may take it off sometimes when guests come over haha
What a cool l👀king lid👊✌
I made mine out of acrylic J bar with 1/4 acrylic spline. For a total of 20 $ it's not beautiful since it was my first one but serves its purpose my next one will no doubt look better if I decide to try again.
That lid is done right!
Fish potato chips...I just can't😂..it's looking good C.J. I left a msg to find out if they custom one for a 92 bow front and mentioned your vlog. TFS👍
Hey cj.
Im setting up a 65g tank down here in aus. Just happens it was around the same time you set up yours.
Set up with natural sea water and sand of the local beach.
It will be interesting to see how the two tanks come up against each other in a few months with such different aprroches to setting up the cycle .
Great vid cj, tank looking great! 👌🏾
Waiting for next update Cj
Well designed screen top 👍
That’s an awesome lid!
Beautiful lid!!
Hi CJ, great tank. Is the setting on your lights where you normally have them or is it different for video shoots? Also what spectrums are you using, are you ok with red and green. There seems to be a lot of talk about them causing excess algae. P.S. Liked, subbed and looking forward to working my way through your vids.
What mic 🎙 are you using ? Sounds so clear . Love the video
Amazing lid! I was looking to these guys for my lagoon tank, $100 though. Curious if the lexan yellows over a period of time.
Feed door and center brace is a nice touch as well👍
Drama D we will our but I don’t expect this lid to change, warp or fade it’s Bullet proof as far as I can tell 👌🏾
I have a 10 gallon rimless without a lid. 2 weeks ago my royal gramma jumped out after having him for about 9 months. Getting a screen now
Parfait et merci !!! 👍👍👍
Restart my 92g corner tank and still in the waiting game.
👍👍
👍👍👍
thanks for the video! I can't seem to decide if I want a XL or standard feed door. I'm also thinking about adding one to each side; however, that lid looks like it'll block the light?
Hey man, great video as usual. How do you do the super fast forward shots? Imovies only does double speed on my phone, your videos get way faster than that sometimes
Squeaky’s Reef time lapse video 👌🏾
Ahhh I see, thanks! You have the best videos out of any marine you tuber man hands down
Hey CJ, hows it going? It’s Lil Reefer, is the JBJ doing ok? Do you plan to remove the sand bed
Lil Reefer no I’m never removing the sandbed I’ll have too many fish that require sand. Stay tuned I’ll be adding more fish very soon 👌🏾
@@CJSAQUARIUMS I have the older model lid on my tank for over two years now with no problems. If the tabs pass the the edge of the tank a little just sand them down a little. Very easy to do man.
Wasn’t the tabs it was the lid itself they wanted to make sure it was right. Stand up company 💯💯💯
How long did it actually take to arrive from when you ordered it? Been pricing one for my new build and it says it takes like 30 days.
Brian's Fish Tanks that’s accurate mine just took longer cause I had to send it back for correction
Thumbs up bro excellent video I like these brother
😎❤🧜♀️
Beautiful lid, more mesh less acrylic. Idk still beautiful!
How much was the screentop Cj ?, thx
Where is shrimp?
Way cool screen! Wrasse tater chips lmao.....
hey man , everytime i see a video come out from it says removed by the user ??? whats up with that?
Radeint I don’t leave live streams up you gotta catch them when they happen. Hit the notification bell to make sure u don’t miss it
@@CJSAQUARIUMS yea , i guess with a live phone stream you can not upload a replay video. my life is too busy to catch things live , but have not seen a cj update video in awhile. wondering how that new tank is.
Be awhile before I do a update I’ve been busy. U can follow my Instagram I do post more there @ Cjs aquariums
@@CJSAQUARIUMS I will check out IG, thanks for all the content so far. Setting up my 45g finally
C’mon. We all need to learn how to read a tape measure. Me included lol
Hey man do you have cord cut out on the lid?
Taha Mazhar you can let them know where your cords will be
If you don't mind could you email me your order summary so I can show them what exactly I want
Reach out to them on the website they can match my order to yours if you have the exact same tank. If not yours would need to be your own just let them know where u seen the video 👍🏾
I have the exact same tank JBJ 65 Rimless Flat Panel
Quick? Did you remove the acrylic piece separating/between two return pumps to replace them with one dc pump?
Nice lid. I made my own custom lid. Check it out.
$200 lid for a $20 fish no thanks lol
👍👍