Trading full-time. If I can do it, you can do it too. Create an Exness account: one.exnesstrack.net/a/cneq3igfzi Facebook: web.facebook.com/profile.php?...
Japanese chisels have a hollow ground back. When you took an angle grinder to that chisel, you screwed it up royally! Much better if you use a bench grinder to clean up the bevel and a set of stones to polish the rest of blade. Nice video, and great work on the handle, but I would give you a D Minus for work on the steel. Better luck next time. Jon
Well, I think that those steel enclosing rings should be restored before applying to the handle. The rust on inner sides is still there. I think about nickel plating in case you prefer "shiny" look or cold blueing in case you prefer antique look.
@@kingoftrading75 Before you assembled the parts I was wondering if cold blueing would be of any use in preserving the metal or, in this case, if it was even desired. At any rate, as someone who has no knowledge of the right and wrong ways to restore a broken chisel, I think you did a good lob.
What is the purpose of hearing the end of the chisel that inserts into the handle before reinserting it? I’m not questioning what you did, just trying to learn.
the ring end needs to be filed smooth and fitting onto the handles smooth tapered end, no corner or shoulders on ring or handle, the ring needs to compress the wood hence it and the handle need to be smooth, otherwise its a catarophic design flaw. the overall handle should be mostly straight in yhe middle with no added detail grooves or flat/oval spots. but the rest you did ok-ish on. research is key tho...
The old handle split because the hoop wasn’t set so it could work it’s way down the handle, and mushroomed instead. You haven’t fixed it and given enough hearty whacks with a metal hammer, it will split again.
Trading full-time.
If I can do it, you can do it too.
Create an Exness account: one.exnesstrack.net/a/cneq3igfzi
Facebook: web.facebook.com/profile.php?...
Japanese chisels have a hollow ground back. When you took an angle grinder to that chisel, you screwed it up royally! Much better if you use a bench grinder to clean up the bevel and a set of stones to polish the rest of blade. Nice video, and great work on the handle, but I would give you a D Minus for work on the steel. Better luck next time. Jon
thank you
Eso. Es. DAMACIADO. HERMOSO. AMO TU TRABAJO. ERES. MUY BUENO EN LO Q HACES GRACIAS POR COMPARTIR SALU2 DESDE COMMERCE TX USA 🇺🇸
Well, I think that those steel enclosing rings should be restored before applying to the handle. The rust on inner sides is still there. I think about nickel plating in case you prefer "shiny" look or cold blueing in case you prefer antique look.
thank you
@@kingoftrading75 Before you assembled the parts I was wondering if cold blueing would be of any use in preserving the metal or, in this case, if it was even desired. At any rate, as someone who has no knowledge of the right and wrong ways to restore a broken chisel, I think you did a good lob.
I respect the effort... but... the technique used has totally destroyed the overall character of a japanese chisel.
thank you
i dont think it did..
Oh man ….I would get all giggly if I found that at a garage sale
Try to test the tool after the restoration, it makes the whole process complete
thank you
PDG! 10/10
thank
Незаконченная работа... А начало такое обещающее...
What wood was used for the handle? Persimmon would be ideal, if you can find some.
What is the purpose of hearing the end of the chisel that inserts into the handle before reinserting it? I’m not questioning what you did, just trying to learn.
It looks like you did the best you can, with what you had. 135,000 views of how not to do the chisel justice. More of a tech person I think.
perfect job friend congratulations
thank
サンダーを使うのは、駄目ですね。
刃に熱が入ってしまいます🥲
thank
Nice work dude ..... thanks 👏👏👏👏
than you
Японский мастер перевернулся от испуга увидев как ты испортил долото
A real beauty!
thank you
You forget to punch the width of this wood chisel and i love so lot your job.
Well done.😊
Thank you my dear friend
the ring end needs to be filed smooth and fitting onto the handles smooth tapered end, no corner or shoulders on ring or handle, the ring needs to compress the wood hence it and the handle need to be smooth, otherwise its a catarophic design flaw. the overall handle should be mostly straight in yhe middle with no added detail grooves or flat/oval spots.
but the rest you did ok-ish on.
research is key tho...
😍❤️❤️❤️❤️
....parecía que había llegado al final però... RESUCITÓ Felicidades un buen trabajo. Saludos desde Barcelona Catalunya
thank
Excelente trabalho. 👏👏👏🇧🇷
thank
The old handle split because the hoop wasn’t set so it could work it’s way down the handle, and mushroomed instead. You haven’t fixed it and given enough hearty whacks with a metal hammer, it will split again.
thank you
What would you suggest doing instead
Good restoration
thank
@@kingoftrading75 You are welcome
Wtf!
Mach einen Griff aber lass den Stahl in Ruhe, wenn du keinen Plan hast! 🤮
thank you
good job
thnak
how to completely ruin a japanese chisel
Calificación 7 pudiste haber hecho mucho mejor trabajo
thank you
try burning the grooves in with a metal wire next time
thank you
Wtf 😳
👏👏👏👏
🤣🤣🤣🤣🤣😂😂
hello you
ehem
hello
This restoration is mediocre at best.
thank you
All you have done is cleaned it. You haven't restored it or put a decent, honed, edge on it.
thank