Thank you so much for this video . Everyone else puts unnecessary bull on they're videos and you get straight to the point on install with good tips . Like rocker arm lifters all the same length etc ..thank u
I've got 6 or 7 cats helping me work on the wifes car. They are strays, but they stay around here because I feed them 2 times a day and keep fresh water out for them. I almost have the intake back on, but I can't find 2 of the bolts. So I'll probably have to go buy some. Thanks for the video and your reply Julian.
A great scraper, is a "Carbide" scraper. Usually a Carbide tip, welded to a piece of metal, fixed to a handle. Works great. Be VERY careful, if scraping aluminum!!! It'll gouge VERY EASY
Got a question on the head, there's a tiny hole on the driver's side rear of the head, no threads just a tiny hole that sits on a machined flat spot, what's this for?
here is all info. 134 ohv (2.2) 8 valve chevrolet 1994 -1992 vin 4 1st( long bolts 46 . short bolts 43) 2nd all bolts turn 90 degrees . ok its only 2 easy steps any question let me know
Thanks! Awesome video. Cellphone camera quality but just what I needed. All of my questions were answered with this video
Thank you so much for this video . Everyone else puts unnecessary bull on they're videos and you get straight to the point on install with good tips . Like rocker arm lifters all the same length etc ..thank u
Thank u
Thanks for the vid! I’m gonna try to rebuild my 02 s10 it will be my first 😬this helps a lot carnal 🤙🏽
good thanks
Thanks a lot of useful info👍🏻👍🏻
I love how the cat is there to help.
lol her name is pancha
I've got 6 or 7 cats helping me work on the wifes car. They are strays, but they stay around here because I feed them 2 times a day and keep fresh water out for them.
I almost have the intake back on, but I can't find 2 of the bolts. So I'll probably have to go buy some.
Thanks for the video and your reply Julian.
Thanks to you I snapped a bolt at the 90 degree turn part.
if u want find ur specific torque each car u can buy book any autoparts like felpro always remember new head bolts
ok if u follow instruccion u ok especiality when its mix like 30 foot pounds and 50 degress or something . make sure the torque rach its its good
Excellent. Thanks.
Julian muy agradecido. Gracias por el video.... Saludos
josean gracias saludos!!!
Very well said
Awesome thanks buddy
thanks👍👍
gracias por el video nunca dijistes cuanto es el torque de los rocker arms todo lo demas perfecto, gracias
Thanks
That egr valve that's been in back of head
Does water flow around there in that area
Aren't you supposed to torque the rockers too with the pistons at TDC??
A great scraper, is a "Carbide" scraper. Usually a Carbide tip, welded to a piece of metal, fixed to a handle. Works great. Be VERY careful, if scraping aluminum!!! It'll gouge VERY EASY
thanks alex
julian #1automecanic Your welcome
Got a question on the head, there's a tiny hole on the driver's side rear of the head, no threads just a tiny hole that sits on a machined flat spot, what's this for?
how do you get the fan off? i got 99 2.2 thanks
Julian cuando una junta esta dañada pude liquidar agua mi camioneta esta liquiando
En que posission tienen que estar los pistones
where can i find the info for torquing n angling my truck
felpro _torque_ specs u can try see ur exact year
What about a 94 with a 2.2 vin 4?
hi crazed let me find
here is all info. 134 ohv (2.2) 8 valve chevrolet 1994 -1992 vin 4 1st( long bolts 46 . short bolts 43) 2nd all bolts turn 90 degrees . ok its only 2 easy steps any question let me know
julian #1automecanic sounds good thanks my friend
good have good day!!!
Really? I don't have to deal with timing chain when servicing or removing the cylinder head?
No this engine have push rods only if u want install new chain
@@julian1automecanic awesome! That gives me yet another good reason to keep the truck
Its good engine