What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
Need advice: How about 18x9 ET35 for front and 18x10 ET25 for rear ? Any suggest for meaty setup tyre ? Any issues for this setup with stock fender and non rolled ?
I am tossing around the idea of going for some Rays Volks from the TE37 series but they are a lot of money so I'm not sure what I want to do. I was initially thinking like some AVID1 AV6s but I want if I get wheels, I'm gonna do it right the first time and I want to get high quality parts for it. I will be getting a gen 1 RX8(2003/2004-2008) so what is the thoughts on these choices? I wont be lowering it any time soon because of my driveway so I will be looking at factory height. For the AV6's, I was thinking 18x8.5 and for the TE37's I was looking at 18x9.5. Any advice for me on what I should go with? This is the first car that I am getting where I will actually be modifying the crap out of it.
What size you think will fit on my Rx8 wide body? I cut all the lip fenders because the air suspension. Right now I have mono corse v10 19” x 8.5. You think some 18” x10.5 will fit on? Without damaging the flears?
check out our gallery! Search your car and see what others are running for wheel specs and fitment specs! -> www.fitmentindustries.com/search-wheel-offset-gallery
Hey I have KONIG SSM on my rx8... Lowered on Tein S Tech.. Fronts: 18x9 +22 (damn near flush if you ask me) NOW THE REARS: 18x10 +15.. fenders were rolled NOT pulled.. and they fit fine, little bit of rubbing on bumps
I actually have 18x9.5 +38 on 255/40 and you will need a roll depending on how low you are. I needed to roll and then i threw a 15mm spacer all around and now i need to relocate bumper tabs. So thats like +23 offset pretty much. It would be smart to run like a 245 or 245 if you wanna lower stancy look but if you go with what i have with no spacers you should be fine. I am almost about to start tucking tire as far as ride height goes.
What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a
comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
Nissan Sunny/Sentra/Tsuru B11 or 12
I have an rx8 2007 with 20's 245 in front 275 in rear and Teint coilovers no rubing issues...
thanks for making this video, ordered wheels for my challenger off of FI, going to order some for my rx8 now from here soon
Weird... I also have the same 2 cars
love my rx8
Niiice!!
Request for what fits a 3rd gen Lexus IS pls!
Keep up the good work FI! Love you guys!
Am on 17inch on my R3, swap the stock 19s for Advan RG-II... Better acceleration, revs quicker!
Need advice:
How about 18x9 ET35 for front and 18x10 ET25 for rear ?
Any suggest for meaty setup tyre ?
Any issues for this setup with stock fender and non rolled ?
I am tossing around the idea of going for some Rays Volks from the TE37 series but they are a lot of money so I'm not sure what I want to do. I was initially thinking like some AVID1 AV6s but I want if I get wheels, I'm gonna do it right the first time and I want to get high quality parts for it. I will be getting a gen 1 RX8(2003/2004-2008) so what is the thoughts on these choices? I wont be lowering it any time soon because of my driveway so I will be looking at factory height. For the AV6's, I was thinking 18x8.5 and for the TE37's I was looking at 18x9.5. Any advice for me on what I should go with? This is the first car that I am getting where I will actually be modifying the crap out of it.
I think I'm going to get the avid II. Great video, great company
Things learned today. He can read a description from a post.
Things We wanted to learn actual fitment.
What size you think will fit on my Rx8 wide body? I cut all the lip fenders because the air suspension. Right now I have mono corse v10 19” x 8.5. You think some 18” x10.5 will fit on? Without damaging the flears?
check out our gallery! Search your car and see what others are running for wheel specs and fitment specs! -> www.fitmentindustries.com/search-wheel-offset-gallery
Gels, why browse for wheels, look over your shoulder. Fitment Industries is your best bet.
I have FR500's on mine lol plan on some teins and rolling the fenders when I get it running and driving
5th gen Honda Prelude????
First two and the last one were the only ones with tidy fitment
Love your face, Gels!
Happy Holidays! Take care!
Hey I have KONIG SSM on my rx8... Lowered on Tein S Tech.. Fronts: 18x9 +22 (damn near flush if you ask me) NOW THE REARS: 18x10 +15.. fenders were rolled NOT pulled.. and they fit fine, little bit of rubbing on bumps
No 20s?
last rx-8 from indonesia
Do RX-8's have the same stud pattern as FC and FD RX-7's?
Yes both are 5x114.3
Really mine 8 didn't make it*sighs*
What's the most aggressive fitment on non-rolled, stock fenders?
Peep our gallery to see what you can get away with! ---> www.fitmentindustries.com/wheel-offset-gallery?trimming=No%20Modification&sort=date&page=1
I did some reading and I think 18x9.5 +38 (common sti size) works pretty well on 255 or 265/35r18. Go to +45 to be on the safe side :)
I actually have 18x9.5 +38 on 255/40 and you will need a roll depending on how low you are. I needed to roll and then i threw a 15mm spacer all around and now i need to relocate bumper tabs. So thats like +23 offset pretty much. It would be smart to run like a 245 or 245 if you wanna lower stancy look but if you go with what i have with no spacers you should be fine. I am almost about to start tucking tire as far as ride height goes.
What wheels fit 5th gen Subaru Impreza Hatchback 🙏🏼
Peep our to see what looks best!!! --> www.fitmentindustries.com/wheel-offset-gallery?year=2017&make=Subaru&model=Impreza&sort=date
Rx7 fd?🥺
I’ve been review the best RX-8 blue one on my youtube
DO NEW EDGE MUSTANG NEXT
s14?🥺🥺
Finally
El camino!
Fd rx7
what fits a 7th generation?
Don’t be out here lying cause I got 18x12s on my rx8 😅
🙏🏼😂
Nooice
4g Eclipse
psshhhhhh i got 18 X10.5 +20 baby + 30mm spacers baby lolol check me out
Dont give a 🐀s behind about RX8s.
then don’t watch the video?
Lol i didn’t. Thought that was pretty obvious.
@@Coldheart1903 Why click on it?