I hope I am not the only one here that gets excited seeing the inside of a premium barrels bore. The replacement barrel also didn’t have all that carbon and copper that the original one did. It really looks like the distributor sold a returned and repackaged barrel.
@@timazbill7746 well bud if it means anything, lots of ar15 barrel manufacturers have accidentally let a few duds out the door. When it arrives check it thoroughly and if you fund discrepancies send it back and they will make it right
As someone with a bunch of followers, you received prompt service with contrition. I got a BA barrel that looked worse and was met with indifference and 'we'll inspect it and let you know if it's defective'.
Same shit i'm dealing with right now. bro their barrel was so under gassed, i had a fucking machine shop check the gas port with set of pin gauges, that gas port was like a fucking .060. never once, no matter the bolt, or buffer different mag, or no mag at all could i get that fucking barrel to EJECT THE BRASS, LET ALONE PICK UP ANOTHER ROUND, bro that fucking gun short strokes so bad I recorded the bolt carrier a few times, that damn bolt only retracts back about 1" lmao. i'm pissed about this. we checked EVERYTHING, everything else was in spec, it was their gas port, and they send me some email from BA saying oh we'll end you an RMA if you can get me 20 pieces of information. well it's a 14.5" pinned and welded barrel, why the hell do i wanna send this back, who's gonna pay for my $2xx.xx bcm barrel nut that's installed on that barrel? I have a $100.00 muzzle brake welded to that barrel... who's gonna pay for that shit? and then they send me some stupid email, we'll look at it and let you know. thanks, i already had a machine shop check it out, you dropped the fucking ball, BIG, not only am i fucked on your $2xx.xx shit stick of a barrel, you 've fucked me out of a muzzle brake, i'll get my barrel nut off after i take a grinder and zip wheel through this piece of shit barrel.
@@imbrandon16 why don’t you just remove the muzzle device and gas block?? Removing a pinned item is on you not them… is a lot easier than cutting the barrel in half haha . If I was them and you sent me a barrel cut in half I would definitely not refund you for being a douchebag. The easiest thing to do since you had someone remove the gasblock and drop a pin in it to check its size supposedly. Well it’s pretty simple to put in a drill press and drill it out a lil bigger and put it back together . If that’s even the case. Pet of Building your own complete gun means you might have to trouble shoot a couple things and pinning and welding everything before you even function testing it is the stupidest thing I’ve ever heard of in my life you don’t have to mount your handguard and optics on it just tighten up your gas block and test it a couple rounds hahaha fuck you wouldn’t think you’d have to explain that to someone I’m sure the customer service guy was like blown away by your own stupidity haha.
Same here, just received a BA .308 fluted barrel that has the deepest rotating reamer marks from one end to the other I have ever seen. The second worse was military barrel from the 60s and it was a distant second. It also is dark with what looks like rust stain, sadly I sent them bore scope pictures and they say it looks normal. I know that is BS because thankfully none of my other barrels look like fine threads were cut in the bore LOL.
This is exactly how my 6 ARC Ballistic Advantage barrel came.. Bubble wrap over a sealed plastic bag with rubber protection on the muzzle threads and barrel extension. Outstanding!
Hanson rocks dude….I can’t complain about any of the 5 I own. Fluted 18 is my favorite….16 BA profile pinned 223…10 in 300 BO….8.3 9mm16 in modern 308…(chef’s kiss). All shoot perfectly and are among the best value AR parts to be found anywhere! I would always start your build with at least considering BA barrels…the receivers and bolt carriers are money too. Pretty much has all the best features of Aero lowers and uppers with different logos. The man knows the platform and even will show you how to dimple your barrel himself at home. Hanson could be the MVP in the industry right now. Nice review brother.
Ballistic Advantage is the real deal! I purchased one of their premium barrels from a distributor in Texas and after receiving the barrel I 1st checked the headspace of the barrels chamber with PT gauges and was surprised when the bolt easily closed on the NOGO gauge. I tried to get in touch with the distributor via phone and emails and was completely ignored by them! Once they did respond via email after a couple weeks I was told that I would need to go to the manufacturer for a resolution. While I was waiting for a response from the distributor I contacted Ballistic Advantage and described the issue. They responded to me that same day. After a couple emails I received a return mailing label from Ballistic Advantage who then asked me what barrel I wanted for a replacement. I explained to Trisha that I was concerned with timing of a delivery since I live in Washington state. I picked out a barrel they had in stock and she rushed delivery - I received the barrel a couple day's later. These guy's rock!🙂
I just ordered a 16in 223 Wylde 1/8 twist premium series stainless Hanson with a pinned gas block and after watching this video I am super excited to get this barrel. It was reg $245 and I got it on sale for $199 so I couldn’t pass it up lol. I already had a regular ol panther arms 16in gov 1/9 twist barrel but I went all out on everything else on the build so I said screw I can’t have every part of the rifle top of the line and put an ol run of the mill barrel in it. Great video bud.
I have to agree, either that barrel was "used" and someone returned it without saying they shot it or it say somewhere alittle to long. Glad they were able to take care of you and looking forward to some results.
@@troyholder1 Oh, I know. I'm guilty of searching all of them for the best price when I get a barrel but this is making me rethink that. I've only gotten 1 barrel that was old. The other one was through a distributor but I waited months for it to come off back order so it was brand new.
Also check out RIGHT TO BEAR ARMS we site. They are also a veteran owned and operated co and they team up with BA and have BA barrels with both companies logos. Co branded. Same barrel but at least $20 or more off.
Just ordered 2 barrels from BA, both 16”, one .223 Wylde, and one 6mm ARC. Looking forward to a couple of new builds. Stepping up, though never have had a bad barrel from any maker.
I bought a Ballistic Advantage barrel and it came wrapped and plugged. It is the "Modern" version and still looks like they polished the inside just for me.
Best AR15 barrels i have put my bore scope in have been wilson combat barrels. I am a 1000yd benchrest competition shooter with both light and unlimited class benchrifles and i run all Brux and Hawk Hill barrels so i know what a good bore looks like and the Wilson Combat are spectacular. I changed all my AR15 barrels over to WC
I have mixed feelings as to whether they cherry picked the barrel or not. I hope they didn't send you a hand picked barrel because of the fact that you're filming a review on it. On the other hand I'd hope that any time someone has an issue where they get a barrel like the last one you had, that BA would hand pick the replacement barrel to make absolutely sure the customer doesn't get another defective barrel.
All my BA have come packaged like that with protected extension and threads. Their costumer service is awesome. Have a 14.5 with 13k through still shooting sub minute with Hornady 75gr. Tested it last weekend.
So it looks like you got a used barrel sold to you as new from Big Daddy Unlimeted. The original barrel you got from Big Daddy Unlimited came in the original packaging but it was unsealed, had no stickers on it, no cosmoline and didn't have the protectors on the ends of the barrel like the replacement barrel that came directly from Ballistic Advantage. At least that's what I got from your comments in all three of the videos about the barrel. I was thinking about signing up for them since I am in the process of building two new ARs until I saw a video review of them that made me kind of suspect they were at least a little shady after reading some of the responses to some of the comments to the video. After seeing this round of videos about this barrel purchase from them I won't be signing up for Big Daddy Unlimeted. I'm glad that Ballistic Advantage took care of you. I'll be buying one of their barrels in either the 11.3" or 12.3" barrels but I'll be buying directly from them. It's probably a safer bet to buy from them instead of a place like Big Daddy Unlimited. In my opinion it looks like it's buyer beware when buying from Big Daddy Unlimited.
That’s Identical to the barrel that I received from ballistic advantage, only I got a gas block with mine.. but I love this barrel! Very smooth very accurate. It was a touch tight but perfect fit on my Aero Precision M4E1 upper..
I just want to let you know that the hanson barrel i just purchased did not come packaged in the same manner as the one you received. There was no plastic nipple on the crown, no bubble wrap. only came in a plastic bag surrounded in a few pieces of Kraft paper. It looks beat up.
And now we make a run on bore scopes.I wonder how thousands of barrels would have been rejected if they were scoped by the owners. I`m not guilty I think ,I purchased mine for a different reason. But kind of fun to play with as it brings you into a different learning subject. I hope the manufactures can tolerate the run on bore scopes without doubling our cost.
OK, now I feel much more comfortable about obtaining their barrel, but will have my gunsmith inspect it with bore camera before installation into a build. BA sure deserves our love back :)
I choose 1/8 because I like to run the cheaper ammo but there’s so much information it’s difficult to sort through it all glad to see I made the right choice on my first ar style riffle
It only takes once for me to turn my back to a company that will not back there product's. I was a loyal customer of cold steel knifes. I paid a premium price for a knife with obvious defects sent it back as requested with a detailed note. The knife was returned to me 3 weeks later in worse shape. I sent it back with a note telling them to keep it and they did never again will I buy from them. Customer service is everything good on Balistic advantage for standing behind there product's but there customers.
I am currently waiting on a replacement barrel from ballistic advantage, the first premium barrel was gouged during the rifling process also. Hopefully the replacement is as good of shape as what you receive
2 years late to the show but just received today a premium 18 in Ballistic advantage 223 wylde barrel and although it was in bubble wrap I received no stickers or t-shirt... or anything extra.. I'm sad...
" What does that remind you off" lol. I have a 14.5" 223wyld b/a pencil barrel 1:7 twist I don't have a bore scope but I do have a bunch of rounds through it shoots very well. Easily 1.5moa with fmj bulk ammo and better with a few different match loads. Seems to like the 62grain Hornady frontier bthp match out of everything ive shot through it.
I recently bought a barrel from them and I’m not sure if I should go through the process of having it swapped out but I haven’t even shot it yet nor do I have the tools to inspect the inside of the barrel but there’s a small F etched into the top of the barrel and it could be accidental or not but I have yet to try it so not sure what to do
well, that's good to know. working up an aero precision build atm with a BA barrel. I've heard good things about Aero but don;t know much about them really.
A question on scopes for the 6.5 Creedmoor. I like the Vortex style scopes. What would you use on a 6.5 build out of a primary arms build. I'm not rich so what is the best one for the bucks? semper fi
Kota, if you get a chance check out ds arms barrels, you will not be disappointed. Good price, high value good quality. Milspec stuff 4150, crome lined barrels, stainless and m4 m16 clones. Oh, and FALs of course.
I've been looking for a quality AR pistol. I have other M4 carbine and rifles already but want the light weight and maneuverability. I've been looking at a few "top tier" options that are available currently pre owned. One is a POF one is a DD mk18 and the other is a Noveske upper on a colt lower. All "pistol lengh" barrels. They have aftermarket triggers also and range from $1100-$1400. I'm also looking at a New Aero Precision pistol, the M4-E1 model. I can get it now for $900 out the door. I've never heard much bad if at all about Aero Precision and it has the Ballistic Advantage barrel. I am wondering if in your experience (or anyone else's here) if it is what its supposed to be, would it be a go-to quality like the others as far as what they are? I've heard the barrel and bcg and QC is the only difference in AR/M4's. I don't want to pay $900 for a rifle that I could pay $500 for in another name. But I don't mind paying for quality. I hope you know what I'm trying to say and what I'm wanting. I was trying to find a BCM but can't find one. Thanks for the videos KB. Take care and sorry for the long post. Lol. 👍🇺🇸🐍💪
I have one of their Hansen series barrels that I can’t get to group at all. I have emailed Ballistic advantage several days ago and have not gotten a response from them other than a ticket number. I’m hoping I have the same results as you did with them but so far I’m not super impressed with customer service. I’m hoping I hear from them soon.
Exactly why I don't buy ANYTHING from Bear Creek Aresenal. I have a 300 BLK OUT barrel with a defective chamber that I had verified by two gunsmiths and that defective chamber caused an detonation out of battery resulting in ruining my upper receiver bolt etc. Sent all the evidence to BCA and never heard back from them. Truly horrible company. Never again.
BTW if your a sig lover as I am you def need to get you a p220 match elite hunter 10mm incredible gun probably my favorite of all my sigs heavy as hell but feels like shooting a 40cal polymer frame and is incredibly accurate
@@kotaboy32 you won't be disappointed!! To make it even better I carried through on what sig ended up not doing by putting a red Dot on it a ff3 all u need is the mount egw makes works excellently haven't needed any rezeroing or movement of the mount in 1k rds so far, makes it very easy to stretch out your shots
Your voice has been heard thousand miles away, though. I'm out looking for a new barrel for my DMR build and I see a consistent pattern with BA barrels - they seem to care only if you make a noise on YT. Average Joe does not seem to be of any importance to them. I'll probably skip BA and go for Wilson instead, when they are back in stock in my country.
@@mjones3305 I just received my second package from them and I received a patch, thread protector, sealed in plastic, and securely wrapped in bubble wrap just like in the video. No shirt, but I'm sure if I had been in Kotaboy's situation complaining about a barrel they would give me a shirt, too. This was my second barrel. The one I received 3 years ago did not have a patch in the box, but was packaged the same way.
Since this is that barrel company's 2nd barrel you can bet you sweet ass the triple checked this barrel b4 it left their place..but in all fairness the 1st barrel should have been checked a d top notch.Their QC is sub-par or it would have not come to this. With all the marksmen and gun builders following KB32 this company got the shit smeared all in their face a d more likely than not,lost a bunch of potential buyers and lots of ,$$$$ . Kots..come on now..Saying I dont think they Cherry Picked this for me...Bullshit..anyone with any brains knows damn well they triple checked this barrel knowing it was gonna be on UA-cam.
I hope I am not the only one here that gets excited seeing the inside of a premium barrels bore. The replacement barrel also didn’t have all that carbon and copper that the original one did.
It really looks like the distributor sold a returned and repackaged barrel.
And that's why I only use their barrels. Glad they took care of you.
Just wondering how many people out there who brought this barrel and doesnt have a barrel Scope to see what they got and didnt get..
@@moeynola6747 ya I was about to buy a barrel from them and now idunno
@@timazbill7746 well bud if it means anything, lots of ar15 barrel manufacturers have accidentally let a few duds out the door. When it arrives check it thoroughly and if you fund discrepancies send it back and they will make it right
@@HPAcustomriflesandcerakote barrel turned out great
@@HPAcustomriflesandcerakote best one i have
As someone with a bunch of followers, you received prompt service with contrition. I got a BA barrel that looked worse and was met with indifference and 'we'll inspect it and let you know if it's defective'.
Same shit i'm dealing with right now. bro their barrel was so under gassed, i had a fucking machine shop check the gas port with set of pin gauges, that gas port was like a fucking .060. never once, no matter the bolt, or buffer different mag, or no mag at all could i get that fucking barrel to EJECT THE BRASS, LET ALONE PICK UP ANOTHER ROUND, bro that fucking gun short strokes so bad I recorded the bolt carrier a few times, that damn bolt only retracts back about 1" lmao. i'm pissed about this. we checked EVERYTHING, everything else was in spec, it was their gas port, and they send me some email from BA saying oh we'll end you an RMA if you can get me 20 pieces of information. well it's a 14.5" pinned and welded barrel, why the hell do i wanna send this back, who's gonna pay for my $2xx.xx bcm barrel nut that's installed on that barrel? I have a $100.00 muzzle brake welded to that barrel... who's gonna pay for that shit? and then they send me some stupid email, we'll look at it and let you know. thanks, i already had a machine shop check it out, you dropped the fucking ball, BIG, not only am i fucked on your $2xx.xx shit stick of a barrel, you 've fucked me out of a muzzle brake, i'll get my barrel nut off after i take a grinder and zip wheel through this piece of shit barrel.
@@imbrandon16 why don’t you just remove the muzzle device and gas block?? Removing a pinned item is on you not them… is a lot easier than cutting the barrel in half haha . If I was them and you sent me a barrel cut in half I would definitely not refund you for being a douchebag.
The easiest thing to do since you had someone remove the gasblock and drop a pin in it to check its size supposedly. Well it’s pretty simple to put in a drill press and drill it out a lil bigger and put it back together .
If that’s even the case.
Pet of
Building your own complete gun means you might have to trouble shoot a couple things and pinning and welding everything before you even function testing it is the stupidest thing I’ve ever heard of in my life you don’t have to mount your handguard and optics on it just tighten up your gas block and test it a couple rounds hahaha fuck you wouldn’t think you’d have to explain that to someone I’m sure the customer service guy was like blown away by your own stupidity haha.
Same here, just received a BA .308 fluted barrel that has the deepest rotating reamer marks from one end to the other I have ever seen. The second worse was military barrel from the 60s and it was a distant second. It also is dark with what looks like rust stain, sadly I sent them bore scope pictures and they say it looks normal. I know that is BS because thankfully none of my other barrels look like fine threads were cut in the bore LOL.
This is exactly how my 6 ARC Ballistic Advantage barrel came.. Bubble wrap over a sealed plastic bag with rubber protection on the muzzle threads and barrel extension. Outstanding!
They always have great deals, I just bought a new barrel with 30% off plus my veteran discount of 10%, free 2 day shipping. Thanks kota!
I've had the same exact barrel in one of my builds for about 3 years now. Great barrel ,very accurate.
Hanson rocks dude….I can’t complain about any of the 5 I own. Fluted 18 is my favorite….16 BA profile pinned 223…10 in 300 BO….8.3 9mm16 in modern 308…(chef’s kiss). All shoot perfectly and are among the best value AR parts to be found anywhere! I would always start your build with at least considering BA barrels…the receivers and bolt carriers are money too. Pretty much has all the best features of Aero lowers and uppers with different logos. The man knows the platform and even will show you how to dimple your barrel himself at home. Hanson could be the MVP in the industry right now. Nice review brother.
Ballistic Advantage is the real deal! I purchased one of their premium barrels from a distributor in Texas and after receiving the barrel I 1st checked the headspace of the barrels chamber with PT gauges and was surprised when the bolt easily closed on the NOGO gauge. I tried to get in touch with the distributor via phone and emails and was completely ignored by them! Once they did respond via email after a couple weeks I was told that I would need to go to the manufacturer for a resolution.
While I was waiting for a response from the distributor I contacted Ballistic Advantage and described the issue. They responded to me that same day. After a couple emails I received a return mailing label from Ballistic Advantage who then asked me what barrel I wanted for a replacement. I explained to Trisha that I was concerned with timing of a delivery since I live in Washington state. I picked out a barrel they had in stock and she rushed delivery - I received the barrel a couple day's later.
These guy's rock!🙂
I have a BA 20" barrel on my SPR setup. Thing is a tack driver.
The difference is night and day. I love when a company stands behind their products. They sound like an honest company with whom you can do business.
You never realize how important CS is until you need it, glad to hear that about these guys. Just bought my first barrel from them.
I have a Rosco barrel on my new build and it's a 14.5 .223 Wylde SS 1-8 twist. Haven't shot it yet but I have high expectations.
I just ordered a 16in 223 Wylde 1/8 twist premium series stainless Hanson with a pinned gas block and after watching this video I am super excited to get this barrel. It was reg $245 and I got it on sale for $199 so I couldn’t pass it up lol. I already had a regular ol panther arms 16in gov 1/9 twist barrel but I went all out on everything else on the build so I said screw I can’t have every part of the rifle top of the line and put an ol run of the mill barrel in it. Great video bud.
I have to agree, either that barrel was "used" and someone returned it without saying they shot it or it say somewhere alittle to long. Glad they were able to take care of you and looking forward to some results.
Ballistic is the shit man! Glad they took care of you brother! I can't wait to see what you can do with it.
BA sells to a LOT of middleman vendors
@@troyholder1 Oh, I know. I'm guilty of searching all of them for the best price when I get a barrel but this is making me rethink that. I've only gotten 1 barrel that was old. The other one was through a distributor but I waited months for it to come off back order so it was brand new.
Also check out RIGHT TO BEAR ARMS we site. They are also a veteran owned and operated co and they team up with BA and have BA barrels with both companies logos. Co branded. Same barrel but at least $20 or more off.
Thanks for the update on this. Speaks volumes for Ballistic Advantage and you!
Tubb’s FinalFinish bore lapping bullet system was incredible on polishing my Ballistic Advantage unlapped barrel
I got a stainless p226, and that was the end for me. Spent five years tracking down one of each model they made with a stainless frame
Just ordered 2 barrels from BA, both 16”, one .223 Wylde, and one 6mm ARC. Looking forward to a couple of new builds. Stepping up, though never have had a bad barrel from any maker.
I bought a Ballistic Advantage barrel and it came wrapped and plugged. It is the "Modern" version and still looks like they polished the inside just for me.
Best AR15 barrels i have put my bore scope in have been wilson combat barrels. I am a 1000yd benchrest competition shooter with both light and unlimited class benchrifles and i run all Brux and Hawk Hill barrels so i know what a good bore looks like and the Wilson Combat are spectacular. I changed all my AR15 barrels over to WC
I have mixed feelings as to whether they cherry picked the barrel or not. I hope they didn't send you a hand picked barrel because of the fact that you're filming a review on it. On the other hand I'd hope that any time someone has an issue where they get a barrel like the last one you had, that BA would hand pick the replacement barrel to make absolutely sure the customer doesn't get another defective barrel.
All my BA have come packaged like that with protected extension and threads. Their costumer service is awesome. Have a 14.5 with 13k through still shooting sub minute with Hornady 75gr. Tested it last weekend.
I've. Got 3 of their barrels and NONE of them had the protector on the barrel extension or the muzzle threads!
Happy to hear!!!!! I like their stuff. Just ordered their receiver set for my SPR build. Barrel is next.
I've had great luck with all my BA barrels. But, I have ordered them all directly from them.
So it looks like you got a used barrel sold to you as new from Big Daddy Unlimeted. The original barrel you got from Big Daddy Unlimited came in the original packaging but it was unsealed, had no stickers on it, no cosmoline and didn't have the protectors on the ends of the barrel like the replacement barrel that came directly from Ballistic Advantage. At least that's what I got from your comments in all three of the videos about the barrel.
I was thinking about signing up for them since I am in the process of building two new ARs until I saw a video review of them that made me kind of suspect they were at least a little shady after reading some of the responses to some of the comments to the video. After seeing this round of videos about this barrel purchase from them I won't be signing up for Big Daddy Unlimeted.
I'm glad that Ballistic Advantage took care of you. I'll be buying one of their barrels in either the 11.3" or 12.3" barrels but I'll be buying directly from them. It's probably a safer bet to buy from them instead of a place like Big Daddy Unlimited. In my opinion it looks like it's buyer beware when buying from Big Daddy Unlimited.
This aged beautifully 😂
I love that bead blasted stainless. Just ordered a Rosco 13.7 with the same finish. 👍
Rosco makes a damn good barrel...I too am looking for a 13 ish" barrel...glad to know they make them ...Thanks bro.🤙🇺🇸
I've got an 11.5 Rosco barrel and I love it
That’s Identical to the barrel that I received from ballistic advantage, only I got a gas block with mine.. but I love this barrel! Very smooth very accurate. It was a touch tight but perfect fit on my Aero Precision M4E1 upper..
I just want to let you know that the hanson barrel i just purchased did not come packaged in the same manner as the one you received. There was no plastic nipple on the crown, no bubble wrap. only came in a plastic bag surrounded in a few pieces of Kraft paper. It looks beat up.
I have a BA 14.5 fluted SPR and it’s a work of art.
And now we make a run on bore scopes.I wonder how thousands of barrels would have been rejected if they were scoped by the owners. I`m not guilty I think ,I purchased mine for a different reason. But kind of fun to play with as it brings you into a different learning subject. I hope the manufactures can tolerate the run on bore scopes without doubling our cost.
OK, now I feel much more comfortable about obtaining their barrel, but will have my gunsmith inspect it with bore camera before installation into a build. BA sure deserves our love back :)
I choose 1/8 because I like to run the cheaper ammo but there’s so much information it’s difficult to sort through it all glad to see I made the right choice on my first ar style riffle
It only takes once for me to turn my back to a company that will not back there product's. I was a loyal customer of cold steel knifes. I paid a premium price for a knife with obvious defects sent it back as requested with a detailed note. The knife was returned to me 3 weeks later in worse shape. I sent it back with a note telling them to keep it and they did never again will I buy from them. Customer service is everything good on Balistic advantage for standing behind there product's but there customers.
Some of the best bang for your buck barrels on the market IMO .
How a company takes care of the customer AFTER the sale is the sale!!!
I am currently waiting on a replacement barrel from ballistic advantage, the first premium barrel was gouged during the rifling process also. Hopefully the replacement is as good of shape as what you receive
2 years late to the show but just received today a premium 18 in Ballistic advantage 223 wylde barrel and although it was in bubble wrap I received no stickers or t-shirt... or anything extra.. I'm sad...
That's a big difference in barrels. That barrel looks top notch.
I have P220, I freaking love that pistol. And I'm sure you will as well.
I know this is an old video. Do you have a follow up or and any outcome from shooting with this BA barrel?
That is a really nice looking Sig P220. Look forward to the review
" What does that remind you off" lol. I have a 14.5" 223wyld b/a pencil barrel 1:7 twist I don't have a bore scope but I do have a bunch of rounds through it shoots very well. Easily 1.5moa with fmj bulk ammo and better with a few different match loads. Seems to like the 62grain Hornady frontier bthp match out of everything ive shot through it.
This is good to hear! That bore scope was on back order for a while, finally back in stock and on the way!!
Government profile barrels make no sense. Most alternative profiles will better suit your needs.
reasoning? they have very little distortion and are made for heavy duty use. What profile is better for the price
Please tell me you did not get that first barrel from B. Kings, where I just got mine from.
@KentuckyRegular........I just got a BA barrel from B.Kings because of their sale. It is in perfect condition.......Don't worry about it.
I recently bought a barrel from them and I’m not sure if I should go through the process of having it swapped out but I haven’t even shot it yet nor do I have the tools to inspect the inside of the barrel but there’s a small F etched into the top of the barrel and it could be accidental or not but I have yet to try it so not sure what to do
I love your videos on gun barrels, but I haven't seen anyone done a review on the DSArms barrels at all, what are your thoughts on DSArms barrels?
I just got the 18” opps premium 1/8 and it’s shooting all over the place. Like a 5 moa? What should I do.
honestly, if I can, I will always buy factory direct. resellers do squirrely things all the time. I do trust a few resellers, but still.
Was the first BA barrel used? I thought you got it from Big Daddy Unlimited.
I was about to buy one barrel from them. But after watching hour two videos, I don't think I am going to buy anything from them. Thanks!
Hey kotaboy32, what kind of borescope are you user there? If you don't mind my asking.
Whenever you get something sent to you whether it be on sale or a return, Dingus grabs it from the No-Go bin. Optics Planet is horrible about that.
Much better. Ordering one of their new black series payday!
Looks way better, I like AB Barrels as well👍🇺🇸.......Stay Safe.......Steve from Illinois👍🇺🇸
man im on the market for a new barrel and this is the type of company that i want to get it from
Glad to see the nicer barrel, good CS!
Someone may have taken it out and played with it and then incorrectly repackaged it and it sat somewhere with humidity
Looks great now let's get that gun done
I just found out today that Ballistic Advantage is a Aero Precision Company. . . .
well, that's good to know. working up an aero precision build atm with a BA barrel. I've heard good things about Aero but don;t know much about them really.
The previous barrel was fluted
Man I love that Barrel scope that you have. So great for doing inspections. Who makes it and where did you get it from?
A question on scopes for the 6.5 Creedmoor. I like the Vortex style scopes. What would you use on a 6.5 build out of a primary arms build. I'm not rich so what is the best one for the bucks? semper fi
I like primary arms 3-18 in the Athena reticle. For 499 it will do everything you need
Could the other barrel be a Knockoff ???
Kota, if you get a chance check out ds arms barrels, you will not be disappointed. Good price, high value good quality. Milspec stuff 4150, crome lined barrels, stainless and m4 m16 clones. Oh, and FALs of course.
First
Really glad you received great customer service. Hope they would be that way with us regular folks.
I've been looking for a quality AR pistol. I have other M4 carbine and rifles already but want the light weight and maneuverability. I've been looking at a few "top tier" options that are available currently pre owned. One is a POF one is a DD mk18 and the other is a Noveske upper on a colt lower. All "pistol lengh" barrels. They have aftermarket triggers also and range from $1100-$1400. I'm also looking at a New Aero Precision pistol, the M4-E1 model. I can get it now for $900 out the door. I've never heard much bad if at all about Aero Precision and it has the Ballistic Advantage barrel. I am wondering if in your experience (or anyone else's here) if it is what its supposed to be, would it be a go-to quality like the others as far as what they are? I've heard the barrel and bcg and QC is the only difference in AR/M4's. I don't want to pay $900 for a rifle that I could pay $500 for in another name. But I don't mind paying for quality. I hope you know what I'm trying to say and what I'm wanting. I was trying to find a BCM but can't find one. Thanks for the videos KB. Take care and sorry for the long post. Lol. 👍🇺🇸🐍💪
BA makes good barrels, I have one and it shoots sub moa all day.
Did you end up getting any better accuracy out of this new barrel? I can’t find an accuracy test on this one
Barrel looks a lot better!
I'm a big SIG fan too.....
What borescope are you using?
I have one of their Hansen series barrels that I can’t get to group at all. I have emailed Ballistic advantage several days ago and have not gotten a response from them other than a ticket number.
I’m hoping I have the same results as you did with them but so far I’m not super impressed with customer service. I’m hoping I hear from them soon.
How'd everything turn out?
what is the point of the lands and grooves being perfect if there is no rifling? the bullet isn't going to hit anything ever...
I just got 2 of these BA barrels they better not suck
So I'm guessing it's best to buy straight from the company
Love BA barrels, my go to supplier
Now THAT is how you run a company!
Beautiful Sig pistol sitting on the bench.
Exactly why I don't buy ANYTHING from Bear Creek Aresenal. I have a 300 BLK OUT barrel with a defective chamber that I had verified by two gunsmiths and that defective chamber caused an detonation out of battery resulting in ruining my upper receiver bolt etc.
Sent all the evidence to BCA and never heard back from them.
Truly horrible company. Never again.
Who makes the bore scope?
Thats how my recent order from BA came too.
Hell yeah that's a sexy Sig 45acp KB32👌. I'm glad they sent you a Newer barrel...BA shoots sub MOA no problem!👍🇺🇸✌
BTW if your a sig lover as I am you def need to get you a p220 match elite hunter 10mm incredible gun probably my favorite of all my sigs heavy as hell but feels like shooting a 40cal polymer frame and is incredibly accurate
I plan on it
@@kotaboy32 you won't be disappointed!! To make it even better I carried through on what sig ended up not doing by putting a red Dot on it a ff3 all u need is the mount egw makes works excellently haven't needed any rezeroing or movement of the mount in 1k rds so far, makes it very easy to stretch out your shots
Kotaboy, I can see you're sold on the 1/8 twist. Lol
Now I want to see inside my BA barrels.
The P220 is a good shooter , I have one
I am having the same problem with their barrel. They won’t return my emails or calls! Maybe if I had 145K subscribers they would get back to me!
Your voice has been heard thousand miles away, though. I'm out looking for a new barrel for my DMR build and I see a consistent pattern with BA barrels - they seem to care only if you make a noise on YT. Average Joe does not seem to be of any importance to them.
I'll probably skip BA and go for Wilson instead, when they are back in stock in my country.
Looks like they took EXTRA care to make sure you would review their best work second time around.
Everyone get a shirt and that extensive packaging?
No! Nothing to protect the muzzle threads, no patch, no shirt, not even a sticker. Just a cardboard tube with a barrel in it.
@@mjones3305 I just received my second package from them and I received a patch, thread protector, sealed in plastic, and securely wrapped in bubble wrap just like in the video. No shirt, but I'm sure if I had been in Kotaboy's situation complaining about a barrel they would give me a shirt, too.
This was my second barrel. The one I received 3 years ago did not have a patch in the box, but was packaged the same way.
Much better. Can't beat great customer service. Faith restored so I guess I'll buy barrels from BA.
Big thumbs up for BA... :-)
Lol send me the old barrel. I would put it to use in my scorched dark earth build...
Lol I ordered that Barrel 3 days ago :)
directly from them
Glad they took care of ya! Carry on
Good deal!!
How come I never hear anyone talk about Green Mountain Barrels?
Since this is that barrel company's 2nd barrel you can bet you sweet ass the triple checked this barrel b4 it left their place..but in all fairness the 1st barrel should have been checked a d top notch.Their QC is sub-par or it would have not come to this.
With all the marksmen and gun builders following KB32 this company got the shit smeared all in their face a d more likely than not,lost a bunch of potential buyers and lots of ,$$$$ .
Kots..come on now..Saying I dont think they Cherry Picked this for me...Bullshit..anyone with any brains knows damn well they triple checked this barrel knowing it was gonna be on UA-cam.
Have that same barrel with a VG-6 comp. loves 69 gr. Smk. Sub. Moa no problem.
I’ll take the old Barrel I need a 16” Barrel for my upper 😆😆
I have a new takeoff Daniel Defense barrel for sale and a receiver combo lol stole the rail I needed 😉😉
1/8 way I tend to always go. Glad BA took care of you
What if a no one like myself gets the trashy one? I'm glad they took care of you though
I wonder......