I like the way you work putting on the sticker /decals in sections. That makes good sense to me. I want to do one of these for my daughter . I have never done one b4 and your video is rasy to understand
Hello, I have a video detailing step by step how I made the template. It’s linked in the description box and here ua-cam.com/video/8k6v-Luupbo/v-deo.html
how did you find the logo with all the cutouts already done on the little inside pieces or make the image that you took and made sure that all the little holes were clear
Hi Mariah, like I showed in the video I just googled “lv print png” and used the one I clicked on. The cutouts were already done. Try googling that or something like “lv print full wrap svg” I hope this helps 🤞🏻🙂
Hello Marissa, because of the cylindrical shape of the cup it is normal for your design to be a tad bit slanted. However, what you can do to minimize it is trim the back piece (or wherever you see the design to start to slant) and then align it straight before scraping it down onto your cup (I hope that makes sense). If you notice in the video towards the end around minute 8:13 I use my scissors to cut the transfer tape and then I am left with one piece that I can easily maneuver and align it exactly how I want it to look. If you do this just make sure to cut only through the transfer tape and not the actual design. I hope this helps! 🤞🏻🙂
@@NunezCraftyLife I read the comment and had the same problem with the slanting but I did cut it and I was able to straighten it out thank you the videos have helped me out a lot
I’m so glad to hear that!! Positive feedback like this is what motivates me to make more videos for you guys so thank you so much for taking the time to say that and of course thank you for watching my videos! 🙏🏼
I have tried millions of ways to upload the print on google but can’t find one that comes out with the details, so you have the pattern saved you used? Btw the video was amazing!
No need to apologize! If you are using permanent vinyl then you don't have to seal your cup but many people still choose to do so and there are several methods, some people use epoxy (if you use epoxy make sure you wear appropriate personal protection equipment and follow safety guidelines) , I've also seen some people use Mod Podge. Personally, I've only used CrystaLac brite tone which is an epoxy alternative and it worked for me. I would suggest that you try out a method and see which works best for you! I hope this helps!!
In the beginning of this video she links another video where she makes and what she uses it's called how to make a starbucks vinyl tumbler wrap it helped me out a lot as well
Hello, like Heidy mentioned in the beginning of the video I linked the video where I teach you step by step how to create your own template. Here is the link ua-cam.com/video/8k6v-Luupbo/v-deo.html
What setting is the cut? I used Vinyl holographic setting since that’s the one I’m using but it didn’t cut through I used standard grip but I’m not sure what happened
The slice tool can be tricky , make sure you only have two layers selected or else it won’t work. I made a video all about the slice tool that might help you check it out here ua-cam.com/video/DiRDwsGh1XA/v-deo.html
Hi! If you are using permanent vinyl then you don't technically have to seal your cup but many people still choose to do so and there are several methods, some people use epoxy (if you use epoxy make sure you wear appropriate personal protection equipment and follow safety guidelines), I've also seen some people use Mod Podge or CrystaLac brite tone. If you choose to seal your vinyl on cups then I would recommend that you try out a method and see which works best for you! I hope this helps!!
Hello, if you use permanent adhesive vinyl and follow the care instructions they hold up pretty well. You could also seal your cups with epoxy or my favorite epoxy alternative CrystaLac brite tone for a more permanent solution. Hope this helps💕
You can, some people leave it as is (as long as you use permanent adhesive vinyl), others seal their cups with epoxy or an epoxy alternative called CrystaLac which is what I use. But ultimately the choice is up to you :)
Hello, I have a video detailing step by step how I made the template. It’s linked in the description box and here ua-cam.com/video/8k6v-Luupbo/v-deo.html
Hi! I absolutely loved yor video! Thank you for showing us how to do it! 🫶🏼 I have a quick question where do you buy your starbucks cups? I would REALLY appreciate you answering! Thank you 😊
Hello, I use an epoxy alternative called CrystaLac to seal in my vinyl (I could make a video to show you my process of sealing if you would like) Personally, I have never used Rustoleum but I think it should be fine as long as you are following all the safety precautions on the label and making sure that when you spray your cups no spray goes into the inside (you don’t want to accidentally ingest any harmful chemicals) I hope this helps 🤞🏻
Hi, this is regular cricut brand holographic vinyl, I'm not sure why it is not sticking for you, my only tip is make sure that your cup is fully dry before applying it or try a different brand of vinyl like Teckwrap vinyl. They have nice holographic colors and works well! Hope this helps 😊
Hello, personally I do not sell but from my understanding selling an item like this would infringe on the trademark laws. Yes I am aware that many others on Etsy, online shops, etc sell items like this but just because they do it does not make it okay, they just haven’t been caught yet. However, I am not a legal professional so I would advise that if possible you consult with a professional who specializes in trademark laws. I hope this helps 🙂
I like the way you work putting on the sticker /decals in sections. That makes good sense to me. I want to do one of these for my daughter . I have never done one b4 and your video is rasy to understand
Thank you! I'm sure your daughter will love it!
Hello! When you said to remember to resize it, what are the measurements to cut it?
Dope cup I love the color
Please reapply to this: can you please post a video with the png you uses I have found 10 and none have worked
Omg i made 20 of those for my best friends birthday dinner and everyone loved themmmm
how long did it take
Jenna Persaud a week
where did you get the cups
@@simplykay1074 Starbucks
Tbh! from all the videos, yours is the one that helped me the most🙏🏼😷
Thank you! I'm so glad to hear that! If you have any other questions or videos you want to see let me know :)
I can't find one png that pulls up transparent like that in design space.
Same I've been trying for hours
Omg thank u !!!! This video really helped me out.
Glad it helped!
Love it 🥰
Thank you! 🤗
My holographic would not cut 😩 and I can not get my design to come off my transfer tape when I’m applying to my cup
Can you make a Chanel drip cup?
Why did my lines not come out super straight like yours
Could u make a drip tumbler tutorial?
If you do the LV logo curved with the wrap, then the LVs will be in a straight line around the cup
Thanks for the tip, I’ll definitely experiment with that.
How do I curve the LV? I tried this and yes, the wrap was t straight as you mentioned. TIA
So cute 😍
Thank you!
HY how come yours cut out the outline of the cup but mine didn't
If you use Brite Tone to seal, how many coats would you recommend?
How do I get the yellow shape ?
Hello, I have a video detailing step by step how I made the template. It’s linked in the description box and here ua-cam.com/video/8k6v-Luupbo/v-deo.html
I followed your directions step by step. How does the outline get cut out?
Have you made onc for the glass cans with the lids? Would it be the same way?
Hi! I have not tried that yet sorry! But I imagine the application of it would be similar!
how did you find the logo with all the cutouts already done on the little inside pieces or make the image that you took and made sure that all the little holes were clear
There is a website that has the svg for free i forgot the website but google starbucks full wrap svg
@@thodalys ok tyyyy
Hi Mariah, like I showed in the video I just googled “lv print png” and used the one I clicked on. The cutouts were already done. Try googling that or something like “lv print full wrap svg” I hope this helps 🤞🏻🙂
I followed every step to a T and for some reason my decal did not have an outline and did not cut out the center circle :(
I WASNT ABLE TO CONTOUR MINES I WISH THEY TELL US EXACTLT WHICH ONES THEY USE
How do you keep the design straight all the way around? Every time I do mine towards the back it is slanted :(
Hello Marissa, because of the cylindrical shape of the cup it is normal for your design to be a tad bit slanted. However, what you can do to minimize it is trim the back piece (or wherever you see the design to start to slant) and then align it straight before scraping it down onto your cup (I hope that makes sense). If you notice in the video towards the end around minute 8:13 I use my scissors to cut the transfer tape and then I am left with one piece that I can easily maneuver and align it exactly how I want it to look. If you do this just make sure to cut only through the transfer tape and not the actual design. I hope this helps! 🤞🏻🙂
@@NunezCraftyLife I read the comment and had the same problem with the slanting but I did cut it and I was able to straighten it out thank you the videos have helped me out a lot
I’m so glad to hear that!! Positive feedback like this is what motivates me to make more videos for you guys so thank you so much for taking the time to say that and of course thank you for watching my videos! 🙏🏼
Hey ! I was wondering where you got the cold cups from ? & how much ? I was told by some that I could go to my local Starbucks
Local starbucks have them, i tend to buy them on ebay just making sure theyre still cost effective for me.
Carmen Romero thank you !! I went into my local Starbucks yesterday and saw they sell them for only $3
Have you purchased blank non Starbucks tumblers just like this one? If so could you share the link
I have tried millions of ways to upload the print on google but can’t find one that comes out with the details, so you have the pattern saved you used? Btw the video was amazing!
Wow, this is super cute girl! 👏💕
Thank you so much 😀 The holographic vinyl gives it a nice touch!
Where can I buy the thing you use to hold the cup in place while you transfer the design on the cup?
Hello, my husband actually helped me make it using PVC pipes. You can find one similar on Etsy just search for “cup cradle” I hope this helps🤞🏻
How do you make or get the cone template
Hi, I actually made my own here’s a video on how I did it. ua-cam.com/video/8k6v-Luupbo/v-deo.html
Does anyone know the actual measurements to the wrap? Please and thank you for some reason they are never right when I UA-cam sizes.
24 oz its 10.92W 6.5H
Heeey Quick question what is the correct dimensions? 11.5 and what?
Hi I used 11.5 by 6.7 but your cup size may vary.
How do u seal your cup ? Or we don’t have to ? Sorry I’m new
No need to apologize! If you are using permanent vinyl then you don't have to seal your cup but many people still choose to do so and there are several methods, some people use epoxy (if you use epoxy make sure you wear appropriate personal protection equipment and follow safety guidelines) , I've also seen some people use Mod Podge. Personally, I've only used CrystaLac brite tone which is an epoxy alternative and it worked for me. I would suggest that you try out a method and see which works best for you! I hope this helps!!
Girl everytime i slice it it doesn’t look right idk what I’m doing wrong
Same like fuzzy edges
Hi
How did you make the noodle to hold the cup in place?
Hi, my husband made it for me using pvc pipe and foam.
Ooo! I love this! I can’t wait to try this! ❤️
Hope you like it!
What’s the best vinyl for the Starbucks cups?
I like using permanent adhesive vinyl.
Nunez Crafty Life Thank you
Where you get the yellow template
In the beginning of this video she links another video where she makes and what she uses it's called how to make a starbucks vinyl tumbler wrap it helped me out a lot as well
Hello, like Heidy mentioned in the beginning of the video I linked the video where I teach you step by step how to create your own template. Here is the link ua-cam.com/video/8k6v-Luupbo/v-deo.html
What setting is the cut? I used Vinyl holographic setting since that’s the one I’m using but it didn’t cut through I used standard grip but I’m not sure what happened
I used the Vinyl setting. Try doing a test cut on a scrap piece of vinyl first to make sure it will cut through.
I just wanna do this for my guitar
it wont let me slice at all
My LV didn't come out fine like yours, it ended up looking like when you smudge ink from a pen, do you know why or how to fix it??
You need to use vinyl with cricut, maybe you're using the print and cut part? Vinyl can't look like smudged ink.
It didn’t let me park the wrap
what setting are you putting your machine on that you make yours so perfect? everytime I peel mine I sticks to the paper
Hi I cut this on my cricut maker using the vinyl setting
I got a question. I'm trying to do this same exact thing. Once I layer the starbucks template and the LV logo, it doesn't let me "slice"?
The slice tool can be tricky , make sure you only have two layers selected or else it won’t work. I made a video all about the slice tool that might help you check it out here ua-cam.com/video/DiRDwsGh1XA/v-deo.html
@@NunezCraftyLife thank u so much I will for sure check it out
Do you know the measurements for a 16oz cup. This is for 24oz right?
Unfortunately I have not been able to get my hands on a 16oz cup, I would just measure the 16oz cup and modify the measurements accordingly.
How do you color the templet Im using a hp computer and I can’t
Cricut design space doesn’t really work as affective on an HP computer ive learned that. I use a Dell now.
Do you seal the vinyl with anything?
Hi! If you are using permanent vinyl then you don't technically have to seal your cup but many people still choose to do so and there are several methods, some people use epoxy (if you use epoxy make sure you wear appropriate personal protection equipment and follow safety guidelines), I've also seen some people use Mod Podge or CrystaLac brite tone. If you choose to seal your vinyl on cups then I would recommend that you try out a method and see which works best for you! I hope this helps!!
How well do these hold up against washing?
Hello, if you use permanent adhesive vinyl and follow the care instructions they hold up pretty well. You could also seal your cups with epoxy or my favorite epoxy alternative CrystaLac brite tone for a more permanent solution. Hope this helps💕
Where can i get a cup holder like that?
My husband made this one for me using pvc pipe and foam but you can find them pre made on Etsy
@@NunezCraftyLife thanks
So you cover up the cup with epoxy?
You can, some people leave it as is (as long as you use permanent adhesive vinyl), others seal their cups with epoxy or an epoxy alternative called CrystaLac which is what I use. But ultimately the choice is up to you :)
Where do you get the Template
Hello, I have a video detailing step by step how I made the template. It’s linked in the description box and here ua-cam.com/video/8k6v-Luupbo/v-deo.html
Hi! I absolutely loved yor video! Thank you for showing us how to do it! 🫶🏼 I have a quick question where do you buy your starbucks cups? I would REALLY appreciate you answering! Thank you 😊
Hi thank you for watching! I buy them directly from my local Starbucks. 😊
Hello ! I just watched your video I download the LV logo I tried it but it won’t let me slice it? Help
Do you seal the vinyl? I use a spray called Rustoleum and Im not sure if that's a good spray to seal the cup
Hello, I use an epoxy alternative called CrystaLac to seal in my vinyl (I could make a video to show you my process of sealing if you would like) Personally, I have never used Rustoleum but I think it should be fine as long as you are following all the safety precautions on the label and making sure that when you spray your cups no spray goes into the inside (you don’t want to accidentally ingest any harmful chemicals) I hope this helps 🤞🏻
Is this regular Holographic Vinyl or permanent. I find that my holo vinyl does not stick to my cup even after I’ve cleaned it with alcohol 😫
Hi, this is regular cricut brand holographic vinyl, I'm not sure why it is not sticking for you, my only tip is make sure that your cup is fully dry before applying it or try a different brand of vinyl like Teckwrap vinyl. They have nice holographic colors and works well! Hope this helps 😊
@@NunezCraftyLife thank you so much!!
Am I able to sell these on etsy or do I need licensing?
They sell all over Etsy!! Don't think they are getting permission or licensing.
Hello, personally I do not sell but from my understanding selling an item like this would infringe on the trademark laws. Yes I am aware that many others on Etsy, online shops, etc sell items like this but just because they do it does not make it okay, they just haven’t been caught yet. However, I am not a legal professional so I would advise that if possible you consult with a professional who specializes in trademark laws. I hope this helps 🙂
What if we want a name on it
How the heck did you weed it that easily??
Practice makes it easier and personally I enjoy weeding so I’m used to weeding a lot of complex designs 🙂
where are the cups from?
Hi, I purchased these cups at Starbucks. 🙂
Watching UA-cam love
Krystal River
Great video, I see that the holographic vinyl you used its not permanent, has it come off yet? or did you seal with something?
I seal my cups with brite tone but you can also seal it with epoxy.
I can’t find a good LV PNG file 😭
Hello, Thank you for watching! I know the struggle! But don’t give up! Try googling “LV PNG Stencil” or “LV print PNG” I hope this helps! 🤞🏻
Thank you I will try!!!
@@cass10garcia you can also purchase on Etsy for a couple of bucks. It is worth it and the logo should curve with the wrap
Reduce colors to: 2 and color tolerance to number 150. This will help the “splotchy images” when doing this lol just learned the hard way lol