When designing your artwork for puff with outline how big should you make the outline? I have only done a couple and the outlines didn't turn out that well as in the design I didn't put make them big enough I guess.
There is no rule that I follow except that the satin stitch outline should extend underneath where the puff embroidery will go so that you don't get any gaps. After that, it depends on wide you want the outline to be.
You could set up the outline in a graphic file. A digitizer would then convert your graphic file into an embroidery file either manually or using autoconversion software.
how much does this machine cost and can i get the same effect with a cheaper because i know these types of machines are expensive. im trying to start my own clothing line and something like this would help alot.
Yes, we do custom embroidery on baseball caps. The best way to go is to send me an email at dennis@embroideryd.com with the design or logo that you want to have embroidered.
Visit: www.expressdigitising.com/ Doesn’t the Murphy’s Law seems to apply only when you need to get a large order done and are working against the clock!? When using an embroidery machine, you are bound to come across some problems which can be frustrating, to say the least. Especially if you have a lot that needs to be done. In this blog post, we will go through some of the most common cap embroidery & digitizing mistakes and share with you some simple solutions to that so that you can run your business efficiently.
how i setup my PR620 to make this side to side stiches , I did use foam but i am getting stiches inside the leter from side to side in 4 spot, mean the letter will not lock puffOut 3D
If I understand your question, you want long stitches that sit on top of the foam and not short stitches that compress the foam. I am not familiar with a PR620. However, it sounds like the embroidery file that you are using was not created for puff embroidery. My guess is that the embroidery file has specified the use of short fill stitches rather than long satin stitches. This can be changed by the person who created your embroidery file.
I am sorry for the delay in replying. If you have an embroidery machine, you can create (or have someone else create) a file that will allow you to do puff embroidery.
Boy’s Accidents ay Need Speak Lighters White Black And Have maja güey Have White Hart And Eminem How Much Is The Lines bajar WhatsApp Change The Change The Logo Américas FaceTime Isaac argentina léeme el poema Way One How marcas a FaceTime las Name On It I Hear acose actívame Air ya me arte Here Are There apuro detén sos Dagüey Isaac más Anger Américas The Park
Your tutorials have helped me today. Thank you so much.
Sorry for the delay in replying; but, I'm glad that the video was helpful.
This what I been looking for 💪🏿
Eric Ramsey contact us at info@embroideryd.com if we can help you.
This new video shows how we embroidered a puff letter with an outline on a baseball-style cap.
embroideryd price
We used a Barudan ZQ single-head bridge machine.
When designing your artwork for puff with outline how big should you make the outline? I have only done a couple and the outlines didn't turn out that well as in the design I didn't put make them big enough I guess.
There is no rule that I follow except that the satin stitch outline should extend underneath where the puff embroidery will go so that you don't get any gaps. After that, it depends on wide you want the outline to be.
That would be something the digitizer would have to do right. Can't do that in my artwork.
You could set up the outline in a graphic file. A digitizer would then convert your graphic file into an embroidery file either manually or using autoconversion software.
how much does this machine cost and can i get the same effect with a cheaper because i know these types of machines are expensive. im trying to start my own clothing line and something like this would help alot.
Would you do a custom embroidery on a baseball cap? Is that a service you provide? Or is this just a tutorial? Ty
Yes, we do custom embroidery on baseball caps. The best way to go is to send me an email at dennis@embroideryd.com with the design or logo that you want to have embroidered.
@@embroideryd Great thanks!
When you said you reduce the tension, are you using the very top tension knobs or the middle one on the machine head?
Thanks
Top
Thanks
How many mm is this foam? I need my puff look like this love barudan
We love our Barudans also. We used 3mm foam.
Visit: www.expressdigitising.com/
Doesn’t the Murphy’s Law seems to apply only when you need to get a large order done and are working against the clock!?
When using an embroidery machine, you are bound to come across some problems which can be frustrating, to say the least.
Especially if you have a lot that needs to be done.
In this blog post, we will go through some of the most common cap embroidery & digitizing mistakes and share with you some simple solutions to that so that you can run your business efficiently.
What size needle did you use?
80 sharp
how i setup my PR620 to make this side to side stiches , I did use foam but i am getting stiches inside the leter from side to side in 4 spot, mean the letter will not lock puffOut 3D
If I understand your question, you want long stitches that sit on top of the foam and not short stitches that compress the foam. I am not familiar with a PR620. However, it sounds like the embroidery file that you are using was not created for puff embroidery. My guess is that the embroidery file has specified the use of short fill stitches rather than long satin stitches. This can be changed by the person who created your embroidery file.
what is the name of the material used to create that puff effect, d blue thing please
We use puff foam available at Gunold.
we can custom make and supply top original brand hats for you and welcome you leave offer to us if any demand!
How much his price
what embroidery machine was that?
it looks like barudan
FABIAN. Raiders. LA. P
I received a notification that you left a comment on the puff embroidery video; but, I didn't see one. So, I'm just checking to see if I missed it.
how to make it in home
I am sorry for the delay in replying. If you have an embroidery machine, you can create (or have someone else create) a file that will allow you to do puff embroidery.
Boy’s Accidents ay Need Speak Lighters White Black And Have maja güey Have White Hart And Eminem How Much Is The Lines bajar WhatsApp Change The Change The Logo Américas FaceTime Isaac argentina léeme el poema Way One How marcas a FaceTime las Name On It I Hear acose actívame Air ya me arte Here Are There apuro detén sos Dagüey Isaac más Anger Américas The Park