Hello willie. That looks nice and clean. Black color foam and thread are definitely the best for 3d puff. The highest one I have done so far is 3mm. For me all depend on the design even if you set up the machine properly. I have a 1501 tc. The highest price I have sold them is 25$. Minimum qtty. Of 12. I normally do business with commercial clients. I will do a similar one and let you know how it was. Doing an amazing job guys. I personally went more than once to your old warehouse to learn from you. Now I’m. In Texas enjoying this helpful videos. Keep going. Henry Gonzalez Regards.
Thanks for stating the needle size. After you set the density in the software to 1.x, should that density match in the machine? My machine is set at default for 4.0.
I have a Happy HCD2-1501 and I'm doing New Era 403 trucker hats. I am using 3MM foam, 80/12 needles and have my tensions set. I cannot get these hats to run. Needle breaks, thread breaks, ghost thread breaks and severe bird nesting. I just don't know what else it could be.
Hi there, we're so sorry to hear that you are having difficulty with your machine. Please check out this video on birdnesting: ua-cam.com/video/7g1Y9GZqGCo/v-deo.html&t. Also, please join our Facebook support group, Embroidery and Custom Apparel Mastery. Here you will be able to connect and ask questions about different embroidery machine brands. Hope this helps! facebook.com/groups/embroiderymastery
ricoma would it be hendigitising as well as all noted. Thanks in advance. Can you also do or direct me, on video for as low as you can go with Gen 2 cap hoop. Thanks.
I want to know what the tension numbers are for the thread and the bobbin, I'm having issues stitching out a full design because of the seam. I can get most of it out but then it starts to have issues with the thread and bobbin, causing the machine to stop. I use 3mm firm foam
HI there, thanks so much for watching. 80/12 needles are bit more durable than 75/11. Working with thick foam and 3D puff designs, it's best to use a needle that has these qualities. Hope this helps!
Hi there, we do have a laser attachment that can be purchase separately. If oil spills from the machine, it can be easily cleaned, but that means it was over oiled but not an issue.
Hi! How do you adjust the rectangular embroidery area in order to embroider larger (longer designs like this one) without running into the 'Design Is Too Large' Error?
when sewing with puff what is wrong when it KNOTS up on the back of the hat. I am using 80/12 needles , Loosen the tensions ., what else is there to do???/
HI there, thanks so much for watching. What you are describing is called birdnesting. Please check out this video for more information and don't hesitate to reach out to our customer support team by emailing us at service@ricoma.com. That's what we're here for! ua-cam.com/video/7g1Y9GZqGCo/v-deo.html&t
Hi there, thanks so much for watching. You can edit designs using digitizing software like Chroma. You can download a free trial version of it here: ricoma.com/US/software/chroma
Hi there, Nice hat! Great job. If it were me and I was doing 1 hat, then $35, but if doing several as the other person said in this feed, then less...I agree with that person. I downloaded the file and thank you for the file, and I noticed it says it's a DST file. I use PES only. How do I convert the file to work with my PES program? Thanks again!
I also have the EM 1010. I don’t think there is enough depth between needle and cap driver?. Awesome idea..Wish I had purchased the 1501 instead of EM 1010.:(
@@ricomatv File is not the best for hats. It starts from left to right. It don t have any run stitches to hold the material before satin. The end of letters doesn't have any caps to hold and cut foam. Why the Original file made in Chroma is not there for downloads too?
We don't make hats, but recommend you to join our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
![We embroidered 60 CAPS in 90 MINUTES [DETAILS]](http://i.ytimg.com/vi/qjWcq2gBc-w/mqdefault.jpg)
Hello willie. That looks nice and clean. Black color foam and thread are definitely the best for 3d puff. The highest one I have done so far is 3mm. For me all depend on the design even if you set up the machine properly. I have a 1501 tc. The highest price I have sold them is 25$. Minimum qtty. Of 12. I normally do business with commercial clients. I will do a similar one and let you know how it was.
Doing an amazing job guys. I personally went more than once to your old warehouse to learn from you. Now I’m. In Texas enjoying this helpful videos. Keep going.
Henry Gonzalez
Regards.
Thank you so much!
DAMN!!!!THATS BEAST!!!
Thanks so much for watching!
Thanks so much for watching!
Nice work!!!! How do I get the design that low and make the stitch field bigger. Thanks
Hi there! Please send service an email so they can give you some tips/tricks on how to do this! --->service@ricoma.com
Thanks for stating the needle size. After you set the density in the software to 1.x, should that density match in the machine? My machine is set at default for 4.0.
4.0 to 4.5 is usually the standard!
Wow that looks awesome. Can you do it with the EM1010?
Definitely! The embroidery area on the EM-1010 is smaller but this kind of thick puff is still doable
Hi I love your videos and it’s very useful for me
Glad you find them helpful! Thanks for being a subscriber!
I have a Happy HCD2-1501 and I'm doing New Era 403 trucker hats. I am using 3MM foam, 80/12 needles and have my tensions set. I cannot get these hats to run. Needle breaks, thread breaks, ghost thread breaks and severe bird nesting. I just don't know what else it could be.
Hi there, we're so sorry to hear that you are having difficulty with your machine. Please check out this video on birdnesting: ua-cam.com/video/7g1Y9GZqGCo/v-deo.html&t. Also, please join our Facebook support group, Embroidery and Custom Apparel Mastery. Here you will be able to connect and ask questions about different embroidery machine brands. Hope this helps! facebook.com/groups/embroiderymastery
Hi Kronic. What was the solution you found? Thanks in advance. Happy Creating. Love the Kronic btw
ricoma would it be hendigitising as well as all noted. Thanks in advance. Can you also do or direct me, on video for as low as you can go with Gen 2 cap hoop. Thanks.
Looks dope I can't stress enough how much better 3d embroidery looks compared to regular embroidery
We agree, thanks for watching
Hello, is it possible to to to make a multiple color puff design?
You can!
cual es el maximo de altura para un dibujo en una gorra como la richarson
Hola, depende del logotipo y de lo grande que estabas buscando para hacerlo.
Where can I buy Richardson hats
Hi Brandon. Look into WholesaleHats and CapWholesalers.
@@ricomatv I am working hard to one day purchase MT 1501 embroidery..thanks ricoma
I want to know what the tension numbers are for the thread and the bobbin, I'm having issues stitching out a full design because of the seam. I can get most of it out but then it starts to have issues with the thread and bobbin, causing the machine to stop. I use 3mm firm foam
Hi there, for help with correct tensions, click here to be contacted by our support team > Ricoma.com/us/tech-support
HI; I would like to know which size to set for capital letters when digitizing
for caps
Hi there! You can check out this video we did regarding the hoop sizes ---> ua-cam.com/video/Ikm_BQfou_Q/v-deo.html.
Great job!!!👍👍👍👍
Thanks!!
would you mind if i asked why the size 80 x 12 needle?
HI there, thanks so much for watching. 80/12 needles are bit more durable than 75/11. Working with thick foam and 3D puff designs, it's best to use a needle that has these qualities. Hope this helps!
What is the name of the foam how much for that plzz reply
Hi! You can it from Amazon!
Hi! I do not know the ricoma maschines, but is it normal that it doesn't have a laser an that oil spills from it in the beginning (onto the foam)?
Hi there, we do have a laser attachment that can be purchase separately. If oil spills from the machine, it can be easily cleaned, but that means it was over oiled but not an issue.
I need a file digitized to meet the requirements for a 3D Puff embroidery for my online store
HI there, please check out our list of recommended digitizers by joining our Facebook support group here: facebook.com/groups/embroiderymastery
Hi! How do you adjust the rectangular embroidery area in order to embroider larger (longer designs like this one) without running into the 'Design Is Too Large' Error?
Hi there, you can contact support for this issue: ricoma.com/us/tech-support
when sewing with puff what is wrong when it KNOTS up on the back of the hat. I am using 80/12 needles , Loosen the tensions ., what else is there to do???/
HI there, thanks so much for watching. What you are describing is called birdnesting. Please check out this video for more information and don't hesitate to reach out to our customer support team by emailing us at service@ricoma.com. That's what we're here for! ua-cam.com/video/7g1Y9GZqGCo/v-deo.html&t
Do a video of how to lower/raise the presser foot on the Ricoma 1010 please! 🤔💥😫
That’s a great request!
Thanks for the request!
@@ricomatv that would be great ! there is a lot of em1010 users like me! ;-)
@@ricomatv That's is true ya'll never do as much video for em 1010 users and thats not fare to use em 1010 users
Whats speed did you do it? You said you slowed down from 1,000 in previous video but didn't say what you slowed down to? Thanks.
We usually do 500-600 and then slowly increase until it feels where it needs to be.
Hi , where can you buy caps at wholesale price?
Ottocaps.com! We love them.
Love your work! If you don’t mind me asking where do you buy your foam from?
Hi there! We buy all our supplies from allstitch.com!
Can i edit the letters in the file a little? Bawse
Hi there, thanks so much for watching. You can edit designs using digitizing software like Chroma. You can download a free trial version of it here: ricoma.com/US/software/chroma
Hi there,
Nice hat! Great job. If it were me and I was doing 1 hat, then $35, but if doing several as the other person said in this feed, then less...I agree with that person.
I downloaded the file and thank you for the file, and I noticed it says it's a DST file.
I use PES only. How do I convert the file to work with my PES program?
Thanks again!
Yes bulk orders, you can reduce price!
@@ricomatv please help. I do not use your format. Do you have a PES FORMAT? Thank you
Should be able to use export feature to save file in format needed
@@ethiopianeyes ok...Thank you
What program are you using
Ricoma's proprietary software Chroma! you can learn more about it here: ricoma.com/US/software/chroma
I also have the EM 1010. I don’t think there is enough depth between needle and cap driver?. Awesome idea..Wish I had purchased the 1501 instead of EM 1010.:(
Willy, which 80/12 needle? Sharp or ballpoint are you referring?
For anyhelpyou can always contact support here -> ricoma.com/US/tech-support
Sharp point!
Excellent! This is awesome
Thanks a lot for watching!
which machine model is this
Hi there, that's the MT-1501.
How i gang the languages to Arabic for cab embroidery
Hi there! This can be found on your manual.
file for hats and start from left to right?
You can find the design in the description below the video.
@@ricomatv File is not the best for hats. It starts from left to right. It don t have any run stitches to hold the material before satin. The end of letters doesn't have any caps to hold and cut foam. Why the Original file made in Chroma is not there for downloads too?
Do you do orders ?
Hi there, no we don't but thanks for watching!
Do you guys actually make hats? I really want to get a few hats made for my business. I'm the only employee so it's a small order.
We don't make hats, but recommend you to join our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you!
facebook.com/groups/embroiderymastery
Can you do puff on beanies or shirts!?
Yes you can!
Damn sooooonnnn
Impressive isn’t it?
is there anyone here that would be interested in being a supplier for these types of hats? I am looking for someone that can make them.
Do you mean just supply the blank caps or have someone decorate/customize them for you?
Ricoma Embroidery Machines I need both
Kirk Shelton you can check out Garmeo.com
Henry Ma thank you. I will look at them today
Henry Ma Thank you for sharing this lead. They appear to do what I need.
What's with all of the oil splattering all over the place. You can see dripping on the foam & soaking in. You wouldn't want that on your garments.
Thanks for your feedback and for watching our video!
I would charge $60 straight up...probably even $70...
It was a fun project!
Can I get you guys to do some custom puff embroidery for me?
What's your website/email?
Hi there, we don't embroidery but we recommend looking into Garmeo > www.garmeo.com/
Can I call you
Hi! If you still need our help, please submit a request with our team so they can help -----> ricoma.com/US/contact-us