Today’s the first day this spring I’ve ran the a/c and it was running hot almost like the temp setting was stuck. So I went into the diagnostic screen and it seemed to have reset the system because now it’s cold again. I’m not sure if any of the modes are intended to be used that way, but it worked for me.
I came back to your video again because I forgot how to get back to the diagnostic screen, but I must have a switch going out because cycling the temperature +/- seems to continually reset the ac. It keeps blowing hot after a few weeks of working normally.
HtxG20 thanks for the video... Yea mine is blowing out hot air also..now when i go to put in refrigerent it says I'm at 100% capacity...so it doesn't need freon could you share how to fix it to go back to being cold again...Thank you in Advance
@@zoddan replaced the door blend motor that controls the vent. So you have to buy a used one from someone online like I did. Pull it out and take pictures of it and where the connector plugs in so you know the right shape of it to match with the one you're going to buy from someone. You wont be able to find aftermarket at all. Going to have to buy used. Join the g20.net Facebook group and make a post what you're looking for like I did. I'm sure someone is selling there's
@@KwickXonE96 Great advice - both of those little motors went bad on my P11 (blend door motor and mode door motor). I wish brand new units were still available.
Thank you bud for the points on that climate control it is definitely colder at -6
JDM Static Rides glad it helped out!
Thanks for the tips I'm having blower issues now, mine is stuck on defrost but I'll try the diagnostics check first
how did that work out for you?
Today’s the first day this spring I’ve ran the a/c and it was running hot almost like the temp setting was stuck. So I went into the diagnostic screen and it seemed to have reset the system because now it’s cold again. I’m not sure if any of the modes are intended to be used that way, but it worked for me.
I came back to your video again because I forgot how to get back to the diagnostic screen, but I must have a switch going out because cycling the temperature +/- seems to continually reset the ac. It keeps blowing hot after a few weeks of working normally.
You’re a crack master 💯 💯
👌🏻👌🏻👌🏻👌🏻👌🏻
Thanx 4 this info compilation ! 😎
I would like you to make more videos about your QX4I have a finity QX4 and I've been working on it and you had helped me a lot how to fix my AC
I don't own a QX4 but I'm glad that the video helped!
Nice wrap
Do you have a video on wrapping your dash?
I haven't wrapped the dash but I put 3M wrap on some of the trim pieces
After checking the FSM some more, I added a note in my description about adjusting your temperature +/- 6 degrees.
HtxG20 thanks for the video... Yea mine is blowing out hot air also..now when i go to put in refrigerent it says I'm at 100% capacity...so it doesn't need freon could you share how to fix it to go back to being cold again...Thank you in Advance
omg thanks so much
Thank you man! Trying to keep my 99 going strong in this Texas heat as well
Mi ventilador dejo d efuncionar el mismo infimiti q tendra ?
What was your problem when it was blowing hot but your low pressure line is cold
Have the same problem
Glad I found this video bro. My ac blows through top vents up on the windshield. So I would have to probably replace that door motor by the gas pedal?
What did you do to fix your blower problem? I'm having the same problem
@@zoddan replaced the door blend motor that controls the vent. So you have to buy a used one from someone online like I did. Pull it out and take pictures of it and where the connector plugs in so you know the right shape of it to match with the one you're going to buy from someone. You wont be able to find aftermarket at all. Going to have to buy used. Join the g20.net Facebook group and make a post what you're looking for like I did. I'm sure someone is selling there's
@@KwickXonE96 Great advice - both of those little motors went bad on my P11 (blend door motor and mode door motor). I wish brand new units were still available.
Sabes como cambiar de °F a °C.......??
Mine won't go into that mode
nice car :)
Пожалуйста, можно русские субтитры сделать на видео!