How to Replace Front CV Axles 2011-2018 Ram 1500
Вставка
- Опубліковано 23 сер 2024
- Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/id/1AAC...
This video shows you how to install new front CV axles on your 2011-2018 Ram 1500. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2016 Ram 1500 SLT 3.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500
🔧 List of tools used:
• Pry Bar 1aau.to/o8v/1AX...
• 21mm Socket
• 22mm Socket 1aau.to/orY/1AX...
• 36mm Socket 1aau.to/oc2/1AA...
• Brake Caliper Hanger 1aau.to/onq/1AX...
• Trim Tool Set 1aau.to/oawa/1A...
• Vise-Grips
• Torque Wrench 1aau.to/obab/1A...
• Cloth Rags 1aau.to/oNu/1AX...
• Gloves 1aau.to/oa3b/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oaws/1A...
• Hammer
• Jack Stands 1aau.to/oait/1A...
• Pole Jack
• Punch
• Rubber Mallet
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/fVC/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
You guys ALWAYS make it look so easy.......🤣🤣🤣🤣
THANKS FOR INCLUDING THE NUT/BOLT SIZES!! LIFE SAVER!!
Thanks so much, 1a auto. With your help I was able to complete this repair. Unfortunately for me, my upper control arm would not come out even with a impact. I had to use a ball joint presser to add tension so it would not keep spinning. The 10mm hex stripped. My lower control arm also gave me problems. Needed to use a 2 arm press off amazon to help me dislodge the ball joint. I tried removing the cv axle with the lower ball joint on like some other ppl said could be done but it didn't work on my 2011 ram 1500. Eventually, I was able to replace the upper control arm and cv axle. Also, thanks for the torque specifications!
Thanks guys
Thank you for sharing the video. May be doing this on my Ram truck soon, will come in handy knowing what to expect! 👍🏼😎👍🏼
Welp, video is pretty on point and I hope the part lasts as long as the OEM did
Part you forgot, good practice to clean behind the rotor and on the hub flange to avoid issues, also recommend leaving the hub cap off the rim, go for a ride and retorque the hub nut 👍🏻
Do I need an alignment after replacing the cv axles? Awesome vid btw
Cant find any informational on the removel of a half shaft for a tradesman promaster city 2018
Thank you sir ! 😀
Thanks!
Jessica lesson thank you
Awesome thank when do these need to be replaced what’s the symptoms of a bad one ?
What is the difference--if any--between the front left CV axle and the front right CV Axle?
I have a question: My car, Ram 1500 2011, the cv axle is broken on the left side. Are the right and left sides are same size or different?
Are driver side and passenger side cv axle same size?
BRAVO
The 1a auto cv shaft for my ram failed after 5000 miles.
My ram had a 27mm on the bottom of the spindle it wasn't a 24