2007-2013 LONG TUBE HEADER INSTALL! | Silverado/Sierra/Tahoe/Yukon |
Вставка
- Опубліковано 7 лют 2025
- In today's video we install Speed Engineering 1 7/8 Long tube headers on our 2007 Chevrolet Silverado 6.0!
MERCH - lmfscrew.bigca...
AMAZON - amzn.to/4hDe1ij
Man I thought you dropped that broke bolt into the exhaust port for a second lol
Convert your transmission lines to an fittings and braided stainless steel lines I got my kit from glenns auto performance for my 2003 Silverado works great for getting your lines away from your headers
Thanks for sharing, I'll probably get that kit for my 04.
10:44 what do you mean by that😉😮💨
@@That_clapped_WJ7:36 🙃
I got mine from there on my 06 worked great
For bolts that have snapped off they sell clamps that bolt into the oem ground behind the block and tighten the headers down, I had to do that worked perfectly
Nice work! best header install video on this model I have seen so far!
Get some thermal sleeves for any wires or lines that might be too close. I wrapped my transmission cooler lines because they ran right alongside the collector and part of the exhaust
banger every time
Made my day better by posting
always a good day when lmfscrew uploads!
Driveshafts then Procharger then dyno day can’t wait
Man your videos are the best. Seriously love seeing these mods done on these trucks.
I had 3 break on my 01 when I did the speed engineering headers dam 90 dollar harbor freight welder came in clutch haha hoping my 06 goes smoothly
45s ago been waiting for a vmax post!
I love all of the GMT900 content. I have a 2012 Silverado 1500 LT Z71.
I have the same truck with the same headers and I put some heat shielding on the starter wire that is clipped to the frame so it doesn’t melt it!! Mine also had the same problem as yours with the bolts being broke before I even touched it. I had 4 broke off 2 on each side. Ended having to replace driver side head couldn’t get them out
You might want to wrap some wrap some titanium exhaust heat tape around that trans line and around that header to keep your trans temps from getting hot.
Sound's great🔥
Chase, Can we get More videos on the duramax like POV drives???
I just happened to see the video where you guys lifted the white Tahoe so what brand are those tires,and were can i purchase them?
I can't wait for tint windows on it
Did u do new p
Spark plugs while u were in there
14:23 i ran into the same situation on the headers touching the trans line
Get a better driveshaft so u can put more horses down in 3 gear
what does the driveshaft have to do with making power? If anything power is lost through it..
@@angrybadger8136these drive shafts in the 07-13 is only rated for 115mph
@eli do you have a recommendation for a driveshaft I need one for mine
@@GggklhhhhInland Empire Driveline. They make great custom driveshafts. They are right here out of SoCal and built mine for my ls swapped C10
@@angrybadger8136the shop only let him pull in second gear because he had a stock driveshaft. 3rd gear is supposed to be the best to do pulls in that truck
Maybe we should put some money to good strong impacts, and a socket set lmao 😂
How long we gunna wait for chomper to get the 3xhaust finished. Still can't wait to hear it
Equal length exhaust or Equalizer loop
Did you have a tube rub on the passenger side frame? I did.
Do equal length exhaust on the Vmax
Chomped is getting equal lengths
Unfortunately you will probably have to pull that head off to get that rear bolt out. I assume you will eventually do a cam swap and you will need to pull the heads anyways to drop in the new lifters.....in the mean time they actually make an exhaust manifold clamp that bolts to the back of the head that should fix the leak....its Dorman Part # 917-107
It’s possible, it’s a royal PITA. I. Had a 4.8 and I had to weld probably 6 of them out
@@rswick7 It's possible on some of them, the back bolt he broke off is right against the fire wall
Should probably heat wrap the headers!
Did you use the y pipe from speed engineering?
Harbor Freight to getcha a welder bud. They got premium tools without breaking the bank
Having that shop is nice huh?
I've got a 13 Silverado with a 3in level I want some 33x12x22 how much do you rub when turning and can you turn more than 1 full turn
Would only rub at full lock iv ran this setup before
Finallyyyyy
If yall want the full effect on what these trucks sound like, where headphones. It sounds fucking amazing!
Does this mean shes gettin duels?
When are we going to get an update about your F-150
Damn i would of went n bought a cheap welder from harbor freight and got that broken bolt out! 🤔
I love the vmax but why did you stop making videos on the blue ford stx?
he sold that
@@adrianb7452 he did, noooooooooo I loved that truck
I would go with kooks headers.
VMax series is the best. I got a 2013 gmc sierra denali with the 6.2L and AWD. Only has 25k miles and it was the last truck engine gm made without AFM. Currently waiting to be whippled 😎
Uhm I’m not sure where you get your info but the 2013 6.2 does have AFM…
@Thisappaintreal lqh doesn't have afm
@ if you’re driving a 13’ GMC sierra Denali with the 6.2 you 100% have AFM. 4 banger when it drops RPM
@@Thisappaintrealthe l9h does not have afm man. All it takes is two seconds to Google.
@ you said LQH at first…. My fault you’re stupid? If you looked into your precious L9H it has the exact same hardware as the L92. Only difference is it doesn’t turn on. It’s a L92 with a tune 😂😂
Put a Texas Speed Cam in it
Aka big betty
Can we get more Larry mods or start Larry a new build I need new ideas
What happen to you closing your videos out instead of just shutting them off love them just kinda wierd
Now its procharger time!!!!!
Tune needed after headers ?
Can’t wait till you get a new exhaust on it and the dodge
Not a huge chevy guy but man that trucks changin me
C'mon man. You have money to be buying all these trucks, but can't buy a good impact 🤦♂️😂
First
where’s the larry content. we miss larry.
Should've done those motor mounts while the exhaust was out of the way... After LT, it was a nightmare to swap those out.
I wanna see the prochargerrrrrrrr
Shitbox
🤣🤣 Salty eh bud
Where's your rig? 😒