Cleaning The xTool D1 Laser Diode Honeycomb Panels Metal Plates (S5; E12)

Welcome to Episode 12 of Season 5!
Thank you for 14:24 of your time. We have skipped a week or two of cleaning the honeycomb panels on our xTool D1 Laser Diode, so today, we remove the honeycomb panels and the metal plates underneath them, and we get to cleaning! Make sure to do your cleaning maintenance because all that residue that falls in between the honeycomb holes, can create flareups! It shouldn't take that long to clean up, depending on how messy you let it get, but it's necessary. How often do you clean yours and what do you use to get them shiny again? Let us know in the comments!
Some of the products I use can be found below. Yes, they are affiliate links and I do make a few pennies from it, but it's free to click and purchasing products through these links can help your printing solutions. All income that comes from affiliate links is saved up to be used to purchase products that will eventually be used for give-a-ways.
Items used:
amzn.to/3rFWnWJ (Nitrile Gloves)
bit.ly/3OesUvA (Nitrile Gloves; if you can't get them from above link)
amzn.to/3QaUKu7 (Degreaser)
amzn.to/3DlMzng (Shop Towels)
Other item(s) you can use:
amzn.to/44PAB0E (Plastic Razor Blades)
amzn.to/3OnImWl (AC Infinity 4" fan/exhaust)
amzn.to/3q17qZQ (AC Infinity Ducting)
bit.ly/3YJgUVL (xTool)
bit.ly/41ly1P4 (xTool D1/D1 Pro Air Assist)
bit.ly/3IuQQHf (xTool D1 Pro 20W Desktop Laser)
bit.ly/3ECqnpR (xTool D1 Pro/D1 Extension Kit)
bit.ly/3Eypa2J (xTool D1 Pro/D1 Extension Kit w/ 2 Honeycomb Panels)
bit.ly/3YXYyAC (xTool RA2 Pro)
amzn.to/44zYyJT (T-Square)
amzn.to/46YCGcH (Ink Spatulas)
amzn.to/3DmyMwP (Paint Mixer 1-Gallon)
amzn.to/3q1rZ8D (Paint Mixer 5-Gallon)
amzn.to/3OoyVWN (Screen Print Transparency Film)
amzn.to/3rFB9YX (2" Mini Squeegee to card off emulsion edge when coating screens)