i have 2005 325i and just replaced injectors and you video was very helpful, my ignition rail that clips to injectors does not have the secong plug in the middle of the intake, although there is a broken piece in the hole. any thoughts
It would of been nice if in the video you would of shown why you removed the fuel rail, once you had it removed a commercial started for A1 auto then the video restarted with you reinstalling the Fuel rail I was hoping you would show how to clean the Fuel Rail as I’m getting Code P171 & P174 lean fuel mixture .
I like that you never cut out any of the installation/replacement. Clear videos. Thanks for helping us out. I have to change a fuel pump in my e46 tomorrow on a full tank and I read that I may have to dig into the rail/injectors. One question I have is about my strut bar, do you think I’ll have to remove it?
Great video. I have a regulator on my 1992 325i fuel rail with a hose at the bottom. It looks like a vacuum hose. Do you know Where it gets attached to
9:10 sweet. I need to replace the fuel line in my E46, and removing the fuel rail seems way way easier than removing the throttle body and all the stuff
Hi, I have a 2004 330Ci. It is leaking fuel from the injectors only at below freezing temperatures. It always starts/runs perfect and doesn’t leak at normal temps. Is it worth replacing o rings? Or are ‘04 injectors known to leak from the injector body when freezing? If I have to replace injectors do you have to calibrate? Thank you for any recommendations/advice
Rim replacing the Starter on a 2000 323ci and I need to remove the Manifold. Can the manifold be removed without removing the fuel rail? The clips securing the injector electrical connectors are placed awkwardly. Years ago I removed the manifold to replace the Coolant Temperature Sensor. It wasn't that difficult then. I must have reinstalled things incorrectly.
How do you disable the BMW HVAC system from turning on automatically during start up? I don't want it to start right away when I start the car. Turning the HVAC off before turning off the car does not seem to help x5 e53
Hello friend I bought a new air sensor and after connecting it, the car became shaking, and while pressing the accelerator pedal, there is no torque in the car, after that, the car stopped working, my friend, does the new sensor need programming??
Only thing I struggled with was removing the injectors from the fuel rail and it’s not even in the video, kinda disappointed. The rest of the video was fine
Hi do you think you can help me out I have a misfire on cylinder three replace the coil replace the spark plugs Check for vacuum leaks all checked out good check the EVP replace it and I still have a misfire you think might be a bad injector
+Jose Silva We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Can you clean them with carb cleaner ? How you know if they not good anymore ? My bmw 325xi won’t start without starting fluid and it’s not the pump or the filter replaced as a rookie watching your videos 😂 did good doe thanks
+Jrock_464 Thanks for checking us out! Hard starting. One of the first symptoms of a potential problem with the fuel rail sensor is hard starting. Decrease in power, acceleration and fuel efficiency. Another symptom of a potential problem with the vehicle's fuel rail sensor is engine performance issues.
+Bahri Bohari Thanks for checking us out! You would be best to undo each of the sides of these clips to ensure the injectors stay where they are rather than having some get pulled with the rail and others stay put. 1aauto.com
+Co Cacola We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
i have 2005 325i and just replaced injectors and you video was very helpful, my ignition rail that clips to injectors does not have the secong plug in the middle of the intake, although there is a broken piece in the hole. any thoughts
Thanks for not hiding the difficulties . Thumbs up
+اوستيج Thanks for checking us out! 1AAuto.com
It would of been nice if in the video you would of shown why you removed the fuel rail, once you had it removed a commercial started for A1 auto then the video restarted with you reinstalling the Fuel rail I was hoping you would show how to clean the Fuel Rail as I’m getting Code P171 & P174 lean fuel mixture .
You don't need to remove those clips on the injectors. You just pry up gently on the electrical connection
I like that you never cut out any of the installation/replacement. Clear videos. Thanks for helping us out. I have to change a fuel pump in my e46 tomorrow on a full tank and I read that I may have to dig into the rail/injectors. One question I have is about my strut bar, do you think I’ll have to remove it?
The fuel pump is in the passenger side back seat .. you don't have to go under the hood with e46s
How do I disconnect the injector from the Rail to see if the fuel is being pumped and remove Water? (Skipped that part...!)
Great video. I have a regulator on my 1992 325i fuel rail with a hose at the bottom. It looks like a vacuum hose. Do you know Where it gets attached to
this video help me a lots....tank u guys and tanks for sharing
Meus parabéns o melhor vídeo do UA-cam e olha que eu procurei bastante , agora segura o Like
I love all y’all videos every detailed and step by step. Is there a video for the exhaust manifold for the M54 on a X3?
Thank you. Very good , professional video.i learned a lot.
Yeah ummm how do u actually replace specific injectors how do you take them out of the rail itself? U never showed that part.
9:10 sweet. I need to replace the fuel line in my E46, and removing the fuel rail seems way way easier than removing the throttle body and all the stuff
Where’d you get your fuel rail i need to replace mine on my 2004 bmw 330ci
Hi, I have a 2004 330Ci. It is leaking fuel from the injectors only at below freezing temperatures. It always starts/runs perfect and doesn’t leak at normal temps. Is it worth replacing o rings? Or are ‘04 injectors known to leak from the injector body when freezing?
If I have to replace injectors do you have to calibrate? Thank you for any recommendations/advice
Rim replacing the Starter on a 2000 323ci and I need to remove the Manifold.
Can the manifold be removed without removing the fuel rail?
The clips securing the injector electrical connectors are placed awkwardly. Years ago I removed the manifold to replace the Coolant Temperature Sensor. It wasn't that difficult then. I must have reinstalled things incorrectly.
Wait do the fuel injector alr 6 inna row like that or did you take them off im confused
Is the vortex breather Cause engine oil shortages?
Hello I have a problem please help me I have a Bmw e39 520 yer 96 engine rolls not exceeding 5 thousand laps
I replaced the fuel injector that wasn't working and the new one is not working. So is there a fuse or relay for each injector?
Is there a service interval for these seals?
They are very cheap, but I don't want to tear my engine apart if mine don't need doing 😁
That looks like fun!
How do you disable the BMW HVAC system from turning on automatically during start up? I don't want it to start right away when I start the car. Turning the HVAC off before turning off the car does not seem to help x5 e53
Hello friend
What is the reason for the lack of engine oil with no smoke from Shakman but I smell
Thanks for the video: will be doing this soon
Whats the wire thats connected all the way to the back of the firewall on the black harness that goes in top of the injectors?
I know this is a old comment but I believe they are O2 sensors mine don’t have anything connected to them and I was a bit concerned
Hello friend
I bought a new air sensor and after connecting it, the car became shaking, and while pressing the accelerator pedal, there is no torque in the car, after that, the car stopped working, my friend, does the new sensor need programming??
Hi it was really helpful but i have a concern. Does the injectors have an exact order?
Old but no. they''re interchangeable
Love the video,,
Good job
+Rav Singh Thanks for checking us out! 1AAuto.com
@@1AAuto no problem, I bought some parts from you guys few months ago and thanks
great video BUT . . . there is no discussion of the injectors! what they look like, how to change them??
+billrinehart110 Thanks for the tip! We'll pass this info along to our production team.
Only thing I struggled with was removing the injectors from the fuel rail and it’s not even in the video, kinda disappointed. The rest of the video was fine
@@damienhill8736 how do u remove them
You can use Vaseline on the injector seals - it is petroleum jelly, after all, and these seals are sitting in fuel.
Very good video. Thanks
Hi do you think you can help me out I have a misfire on cylinder three replace the coil replace the spark plugs Check for vacuum leaks all checked out good check the EVP replace it and I still have a misfire you think might be a bad injector
+Jose Silva We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Why would you use a pick as a pry bar?
Can you clean them with carb cleaner ? How you know if they not good anymore ? My bmw 325xi won’t start without starting fluid and it’s not the pump or the filter replaced as a rookie watching your videos 😂 did good doe thanks
+Jrock_464 Thanks for checking us out! Hard starting. One of the first symptoms of a potential problem with the fuel rail sensor is hard starting.
Decrease in power, acceleration and fuel efficiency. Another symptom of a potential problem with the vehicle's fuel rail sensor is engine performance issues.
Hai, do i need to release one side of the clip of the injector or both side of the clip to release the harness?
+Bahri Bohari Thanks for checking us out! You would be best to undo each of the sides of these clips to ensure the injectors stay where they are rather than having some get pulled with the rail and others stay put. 1aauto.com
Ineed a video for the m52b20, not this exact engine.
+Co Cacola We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Thanks for
مع عدم ظهور الدخان من شكمان
No Bleeding !!!!!!!!!!!!!!!!
Do you need is what I’m wondering?
Those injector are really dirty.
WOWOWOWOWOWOWO
When you pull the injectors out from their hole can you spray carb cleaner in the holes to clean a bit?
Thanks. Very good video