ENG Translation (Most of it) How to create a DIVA controller with a slider. Easy introduction to Arcade Controller design of touch sensor and non-contact switch. If not, I will make it. Because it's Nico Nico Engineering Department. We will design appropriately. First, use PSoC to attach a touch slider. The touch slider of the DIVA AC real machine consists of 32 touch sensors arranged in a row (probably). You should monitor each touch situation for a short period of time, and if there is a change, you should judge that "the slider has moved your hand". As a test, I wrote a program that sends touch sensor information to a PC. The operation of the touch sensor seems to work well, so let's make a slider according to the design drawing. A slug repellent tape that has been released for 100 years. The reality is just copper foil tape. For the time being, I pasted only three. Each one becomes an independent touch sensor. Write a program to detect hand movements in PSoC. At this point 2017/08/18. Configuration at this time. The method to make Ps4 recognize is described later. Motivation has recovered, so let's wire the remaining copper foil steadily. Use the 80-core IDE cable that is always stocked in any home for wiring. Soldering completed. Let's solder the board for PC connection. For communication with PC, we use Pro Micro (ATmega32U4) which can be used as Arduino Leonardo compatible. Completed prototype of full-scale slider. The PC seems to recognize it perfectly. Buttons and housing. Since the slider production has paragraphs, we will start on the buttons and the housing. First, I personally import the button on ebay. It arrives with a rugged cardboard box w. I will modify it because it is heavy & is noisy when pressed when it is left as it is. Remove the micro switch that causes the noise. The photo interrupter is used to detect the button press. The photo interrupter is a sensor that detects whether light is blocked at a given position. By attaching this to the button, it can be used as a switch without mechanical contacts like the actual machine. Incidentally, let's also make noise reduction. Cut the foam sheet the size of the inside of the button to make a noise reduction pad. Make the Diva Controller housing. I could not cut the round hole, so I cut it with a saw. For the slider, you can cut several Daiso PP sheets and stack them. Copy the button design. Use Microsoft Publisher. by the way. How to actually make Ps4 recognize the controller? What should I do? A popular method is to take over a ready-made product and solder it inside. But this time, let's introduce a system called "gimx" as a completely different approach. Connect in the order of device you want to use → PC → homebrew adapter → PS4 and start the software. It allows you to operate the PS4 with any HID device (the first DualShock and USB conversion adapter in the video). This controller behaves as a keyboard by Pro Micro, and is recognized by Ps4 as an authenticated controller by the created GIMX config file. done! I don't want to decorate too much, so it's done. The back side looks like this. How much was the production? 5000 yen
Удивлён я не только тому, что он его сделал, но ещё и тому сколько это будет мне стоить, а также мне придётся аналоги каких-то компонентов искать, потомучто я живу в России
I've just finished translating 99% of it. I will be commenting it in a second. I may also make a Video in English for when I make my controller (The parts need to ship still)
@@KaseikoArichi btw, did you replace the CY8CKIT-049 by the CY8CKIT-043 or did you have a CY8CKIT-049 laying around? the 049 is deprecated since 2018 and you can't find it easily
ENG Translation (Most of it)
How to create a DIVA controller with a slider. Easy introduction to Arcade Controller design of touch sensor and non-contact switch. If not, I will make it. Because it's Nico Nico Engineering Department.
We will design appropriately. First, use PSoC to attach a touch slider. The touch slider of the DIVA AC real machine consists of 32 touch sensors arranged in a row (probably). You should monitor each touch situation for a short period of time, and if there is a change, you should judge that "the slider has moved your hand".
As a test, I wrote a program that sends touch sensor information to a PC. The operation of the touch sensor seems to work well, so let's make a slider according to the design drawing. A slug repellent tape that has been released for 100 years. The reality is just copper foil tape. For the time being, I pasted only three. Each one becomes an independent touch sensor. Write a program to detect hand movements in PSoC.
At this point 2017/08/18. Configuration at this time. The method to make Ps4 recognize is described later.
Motivation has recovered, so let's wire the remaining copper foil steadily. Use the 80-core IDE cable that is always stocked in any home for wiring. Soldering completed. Let's solder the board for PC connection. For communication with PC, we use Pro Micro (ATmega32U4) which can be used as Arduino Leonardo compatible. Completed prototype of full-scale slider. The PC seems to recognize it perfectly. Buttons and housing. Since the slider production has paragraphs, we will start on the buttons and the housing. First, I personally import the button on ebay.
It arrives with a rugged cardboard box w. I will modify it because it is heavy & is noisy when pressed when it is left as it is. Remove the micro switch that causes the noise. The photo interrupter is used to detect the button press. The photo interrupter is a sensor that detects whether light is blocked at a given position. By attaching this to the button, it can be used as a switch without mechanical contacts like the actual machine.
Incidentally, let's also make noise reduction. Cut the foam sheet the size of the inside of the button to make a noise reduction pad. Make the Diva Controller housing. I could not cut the round hole, so I cut it with a saw. For the slider, you can cut several Daiso PP sheets and stack them. Copy the button design. Use Microsoft Publisher. by the way.
How to actually make Ps4 recognize the controller? What should I do? A popular method is to take over a ready-made product and solder it inside. But this time, let's introduce a system called "gimx" as a completely different approach. Connect in the order of device you want to use → PC → homebrew adapter → PS4 and start the software. It allows you to operate the PS4 with any HID device (the first DualShock and USB conversion adapter in the video). This controller behaves as a keyboard by Pro Micro, and is recognized by Ps4 as an authenticated controller by the created GIMX config file.
done! I don't want to decorate too much, so it's done. The back side looks like this. How much was the production? 5000 yen
「断念しました」っていうツイートが2016年にあってから3年越しになって出るなんて想像してなかっただろうな。公式で出るのは諦めて自分で作っちゃおう という発想になるなんて行動力の化身ですねΣ(゜Д゜)
前に見ていつか作りたいなあと思ってましたが、公式のやつが高過ぎてとても買えなかったので私も作ってみますかね。
ボタンの静音性も高く、なんならHORIさんのより質が良いのが作れそうですし、PCやSwitchでの動作検証も楽そうですね
ボタンのオムロンマイクロスイッチ化ではなくフォトセンサー化が斜め上の発想
今更だけどDIVA FTやりたくてアケコン再販申し込もうか悩んでいたらこの動画にたどり着きました。…頭脳と才能と手先の器用さがあれば自作可能なんですね。ハンダづけは出来るけど、これは難しそうだなあ…4万円近く払うかギリギリまで悩みそうです。
この動画見る前にもう注文しちゃいましたよ...()
いや、それで正解(?)だと思いますよ、届いたら思い切り楽しんで下さい( ；∀；)
動画主さんが無料公開してくれている作り方のPDF見たんですが、私には無理そうに思いました…。再販締切今月末までなのでものすごく悩んでますが、腕前素人レベルなのにPS4本体とアケコンセットで買うなんて猫に小判かなと…デュアルショック４で頑張ってプレイした方が分相応なのかもとDS４でのプレイ動画見てみたりしてます。
なかなかの値しますからね...自作したいのも山々ですけど、流石に難しいので...10万円一律給付と言うことで思い切って買うのもありかなぁと...
PS4本体より高いですもんね。一律給付が本当に出るならそれもありかなと頭をかすめますが、PS5出ることもあってギリギリまで悩みそうです…
プログラミングとかしたことがないのですがその場合どうしたら...私もやってみたいですけど...
リアルの方でアーケードコントローラーこうゆう感じの出るらしい
Great build
Do you think this works for the switch aswell? I'm on a very short budget and this would be amazing to build
just buy from ist mall much cheaper
@@Manio1151 any link to this website?
@@cocojuiiize it ships from korea btw and it also supports ps4/pc/NSW at the same time for only $200
Awesome Controller! Thank You For The Resources! 🙏😊
Still a better button than those made for PS3 and PS4 by HORI.
Удивлён я не только тому, что он его сделал, но ещё и тому сколько это будет мне стоить, а также мне придётся аналоги каких-то компонентов искать, потомучто я живу в России
40000円の買っちゃったよ〜！~_~;
プログラムとかできたら主みたいに作れたのかなあ☹️
Great job
very creative
this is home made
can this controler work for pc?
すごい！
え？！
これって作れるんですか？！
これ作りたい！
簡単なんですか？
あ！
チャンネル登録しました
私藻、作りたいけど、つくれません
I'm lost in a sea of Japanese never to find a way out
I've just finished translating 99% of it.
I will be commenting it in a second. I may also make a Video in English for when I make my controller (The parts need to ship still)
@@KaseikoArichi btw, did you replace the CY8CKIT-049 by the CY8CKIT-043 or did you have a CY8CKIT-049 laying around? the 049 is deprecated since 2018 and you can't find it easily
@@luclu7_ I replaced the CY8CKIT-049 to a 043, yes.
I'm new to electronics so I didn't just have a 049 lying around.