Budget Gun Case from Harbor Freight Part 2! Cost Effective Upgrade and The Guns Inside!
Вставка
- Опубліковано 26 тра 2024
- So using some viewer suggestions and tips I decided to add some plasti dip to the foam in hopes that it last longer. I wanted to share how I did this to educate others. The case itself can cost up to 60 beans not on sale and they can be offered with coupons up to half off at times. Definitely worth checking out. The plasti dip is just over 7 beans a can and definitely worth it. #rangedayeveryday #firearmstraining #tacticalshooter #pewpew #edc #harborfreight #2ndamendment #selfdefense
The firearms used are my sole property and I do not sell firearms.
Thanks for watching! I appreciate the tips viewers added in my last video so decided to try it out myself. I truly appreciate all the input and I encourage you to continue sharing. Be safe out there!
Hell yeah!
Great idea.. I cut a tiny slot in the foam on the bottom and glued in a AirTag in all my cases..
That’s a great idea! Thank you for sharing! Take care
Definitely doing this, thank you for the helpful tip!
But if you can track it so can Creepy Joe!
@@JPEBeard Just name the the AirTag "Epstein Client List" no one will bother tracking it.
@@JPEBeard 🤣🤣😂😬😬😳
I live in humid south Florida, so I save the little moisture-absorbing silica packs that comes in packaging and throw them in gun boxes as an added protection. Those little packs can be purged of absorbed moisture by putting them in the oven at low heat (about 200 degrees) for a short period of time.
Thanks for the tip!
Some of those cases have a valve on them for moisture control, but dessicant packs are always a good idea. You can buy silica gel at a science supply and make your own. Get the kind that changes color when they start getting full of moisture and you can dry it out in an oven and put it back in.
Some can even be microwaved (obviously not the ones in tins). THOUGH, I haven't had much luck with that method. Also probably should bump the oven up to at least 220, above the boiling point of water, but not too much so that it should burn the cloth-like material that some packs come in.
I was gonna make a comment about how you can get silica gel that you can dry out. But it's best to get the food safe ones if you are drying them in your oven. Because some of them are made of some pretty nasty chemicals. I believe Amazon has the color changing food safe ones that work pretty good. If you have the money I would also recommend getting a mini oven that has a circulation fan just to be on the safe side. So you don't end up running or mixing anything with the oven you use to cook food
Northwest Florida here. I save those as well
Hmmm, never thought of doing that to foam, thank You so much for taking the time to do this educational video, GREAT JOB! It would be nice to see how this is holding up in a year, AWESOME collection of guns, PLEASE stay healthy and safe out there!
Thank you for the kind words! I will definitely update over time to show how it holds up. You also be safe out there!
Good idea with the plastic spray stuff to seal the foam. Great video man, thanks!
Thanks for the feedback and for watching. Take care!
Im glad you took the advice from us. I used spray glue to glue mine together. I have used plastic dip and flex seal. I got some flex seal that comes in a little paint can( like house paint)and brush down in to the cut outs. Yours look good 👍
Thanks so much for watching and the input!
Plastidip works great for this. Just do it BEFORE ever storing your firearm in the case. Much cleaner. Very durable and protects the foam from tearing.
Great tip, thanks for watching! Take care
Can't wait to see the full size case! Love seeing all the PSA's lol
Yeah I’m still deciding what to put in there, but once I do I’ll update. I like some psa products!
Rando Wayne, You're so talented! I had to hit the like button!
Thank you
Rando Wayne, I really enjoyed watching this, so I hit the like button!
I appreciate it! Take care
Did a similar project a number of years ago using a pelican case. While the foam is denser than the HF cases, i also used plastic dip spray to seal and close the precut gaps. These case setups do look pretty professional and make a nice range kit.
Thanks for watching and sharing. For the range this definitely works well. Take care
I do this to all my foam great video
Thanks for watching and I appreciate your feedback. Take care
I didn't realize how budget this case mod was until I saw him put all those PSA pistols inside.
This a budget budget case mod 😂😂
I mean , I’m all about value here.
Nice video I did that to one of the rifle cases for my CZ 457 rifle I did not use plasty dip gorilla mix the same product was cheaper. I did it in two layers. After was all done. I glued the two layers together.
I did mine, about two years ago after multiple trips to the range still looks like new. I have done it to one of the smaller pistol cases.
The only thing I did really different is I am able to get foam cut to whatever size I need and whatever thickness, I want from a local upholstery supplier that carries multiple styles and colors of foam. Very good video. I’ll give it a 10 on a reading scale.
Thank you so much for watching and for the feedback with your personal experience. I will definitely be gluing the layers together here soon. Definitely lucky to have the supplier nearby to get the foam cut and have extras. Take care!
Just a tip if you’re going to do a rifle case depending on your rifle for a different size thicknesses the first layer was completely cut out in the second layer I believe was intact no cutting so depends on the thickness of your rifle go with the proper thickness.
I have used that pluck style before for sensitive photography equipment. It seems to break down if you can find a supplier for an upholstery business and can cut your foam to size I would go with the upholstery foam seems to be a better quality
That’s a great tip! I’ll have to look in my local area.
Just a tip if you’re going to do a rifle case depending on your rifle and if you were going to use a bipod or adding magazines, or suppressor for a different size thicknesses the first layer was completely cut out in the second layer I believe was intact no cutting so depends on the thickness of your rifle go with the proper thickness.I have used that pluck style before for sensitive photography equipment. It seems to break down if you can find a supplier for an upholstery business and can cut your foam to size I would go with the upholstery foam seems to be a better quality
I did not cut mine all the way through for more protection in case it’s dropped and the other thing I’ve seen videos people doing this if you’re carrying the handle and you drop the case by accident most people have their scope facing down so if you drop it, all the pressure is going on the scope so if you open it up, it looks odd. The way it’s facing where the scope is toward the handle. Keep up the good work you did nice work.
Great job and shared upgrade that is an excellent special case for use to carry multiple selections of handguns with possible accessories. I forgot the purchase when the sale was half price on this case. If you're ever in Georgia...North Atlanta and want to use my private range for fun or videos you're invited to.... Plus have use of Barrett 50 BMG to PMR30s. Everything free including ammo and instruction. Even 50 Beowulf ARs, to rare Colt SR Match Elite rifle...plus other tools, timers, lastest headphones, always free.
Thanks for the offer, I’m usually through Georgia at least once a year. I appreciate you watching and giving feedback!
The problem with cheaper gun cases, is the light weight overtly soft foam that comes with them. I've gotten a cheap case from my LGS with that same large square foam and within a short amount of time, my handguns tore it up to the point where I had to try and reinforce everything with gorilla tape. Now I just get pelican cases.
That’s fair, I know they sell replacement foam on Amazon but I’ll see how long this lasts
Having done the plasti-dip on multiple cases with pick-n-pluck foam, the more coats the better for longevity. The cost of additional cans far more beneficial to purchasing new foam. Highly recommend getting the spray can trigger handles. Prevents fingers and eventual hand cramping from pressing the cans to spray. Found out that on one of the large Pelican cases I sprayed...lol
I definitely agree the more coats the better! Yeah I’m feeling to do the larger case I’m gonna need the handle because I’d like my fingers to be usable after spraying it.
Keep silica packs throughout the layers to remove trapped moisture in the case. The valve works both ways it keeps both moisture out and in at the same time. Just an idea.
It’s a good idea, I appreciate your feedback.
I used one entire can on just the top of both layers. Also getting between the cut outs. I bet I got about 6 thin coats out of can. I'm happy how it turned out.
Nice! Sounds solid
I did the same thing with the apache 3800. Works awesomely .
That’s awesome, thanks for sharing
Thanks for the vid. Looks nice
That’s for watching and for commenting, take care
Didn't know that other stuff existed was about to buy some Flexiseal...Just saved me some money.
Thanks for watching, glad I could help!
Thank you for the video following along would you please follow up, after multiple rain strips to see how the Plasti dip holds up?
Thanks for watching, I definitely will update! Take care
Pretty darn cool, man.
Thanks bro! Did you get one yet?
That is a great idea 💡
Thanks, I can’t take the credit as viewers suggested it but I’m glad I did it. Thanks for watching and take care.
If you invested in a great weapon.
Invest in a case that respects your investment.
Not something you've gotta McGuyver that wont last.
Making something your own is part of the journey. I respect my investment so I made the case suit my needs. Thanks for watching
Good idea. Nust bought a 3800 from HF. Now deciding which pistol to put in and what configuration.
It’s like adult arts and crafts. Just have fun with it! Take care
I did this a few months ago and the plasti-dip didn’t work as well as I thought it would but it is better than not using it at all but it may take more than one can to achieve a better result
Thanks for sharing! I’m pleased with the results thus far, that being said if I notice any changes I can always add layers .
I'm sad I missed the 50% off sale for these last week :( But I had same idea about using different color plasti-dipp for the foam.
I’m sure they will be on sale again sometime, they usually do runs specials or at least like 10-20% off. Take care
They got a 20% off till tomorrow.
i will try this with flex seal spray too i wonder if it might be more durable, i worry about plasti dip flaking off after some time like how it does on cars
It’s worth a shot! I may try flex seal with my 9800. For science of course.
Just get that spray contact glue ready, wrap the gun in a garbage bag to make sure the glue does not touch it, then wrap the gun/garbage bag in a thick flannel bed sheet, then spray the glue, then press the wrapped gun into the case where you picked out the foam and the foam should stay in place as it now has a flannel liner between the gun and the foam keeping the foam perfectly in place.
If you can find it, a nice felt liner would be even better!
Interesting tip! Thank you
Closed cell foam is ideal, otherwise, it will soak up the oils.
Foam can both harm and be beneficial, just need to figure out what works best for you
Closed cell foam is the best, apache cases are excellent buys.
Great video, could you tell me what kind of hedge you have off to your left? Looks like it would make a great barrier.
Thanks for watching, they are actually American holly that have grown close together and we trim them up. But definitely are a great property divider.
Thanks! Have a dickhead neighbor and I don’t like fences.
Time to start planting then!
Liked and subbed!
Thanks for watching, take care
Crazy see the cut out foam is selling for more than the case
I know! It’s seriously crazy
I did this exact thing about two years ago. Looks great but will still tear in chunks if your not careful.
Thank you for the advice and showing how these can last! Take care
If you can look in your local area for a supplier that supplies foam for furniture repair, I found a local supplier that can cut any size any thickness I want price is very reasonable, and the quality of their phone is better than the plug style
Cool video
Thanks, take care
Do you think using the brush on version would work better? Or even actually dipping it as intended?
The spray worked adequately but requires multiple layers. If using the brush on could probably avoid the need for layers due to you applying the desired thickness. In my next video I’m doing the larger case and I’m also going to g a different route with coating using flex seal. Thanks for watching!
@@RandoWayne I eagerly await the result!
@@zfgnerdlife it’s uploaded now
@@RandoWayne oooOOoOooOooO, my own personal notification. What a gentleman.
The big case I bought is just too heavy when trying to take my AR to the range…
The big case is definitely on the heavy side, I figured it will help me get an arm workout
Nice! I took inspiration and created a replica.
Awesome! I’m glad you did! Take care
The correct way to use a hard rifle case is to throw the foam away and put a soft rifle case inside instead. This way you can leave the heavy hard case in your car or at your camp site and only carry the soft case with you to the range or whatever.
That’s a good idea!
Foam is not abrasive. When buffing a car the compound you use is the abrasive. Foam traps dirt and sand that then can cause abrasions.
Not gonna argue with you, foam can be an abrasive though.
Safe to say the rifle is a psa?
The rifle I have in the rifle case is actually ruger American gen 2
Good stuff!
Thank you! Take care
I found hot glue gun works best to goue the layers
@@craigr7151 thanks for the info, take care
I thought you were going to plastidip the box, the foam looks nicer in black!
I like the tan color, just wanted to hopefully help The foam last longer . The coating really does keep the pluck apart foam in place well and I think will help it last longer!
“There goes all your firearms”…? If you can fit all your firearms in that case, you have some work to do.
Obviously they all can’t fit in there. But there’s always work to do
From someone with over 35 years automotive refinishing experience I don't like the idea of spraying something over the foam, eventually it could flake off making a mess every time you pull a gun out, I don't really think it's functional... I feel it has a greater chance of doing harm to your weapons than good.
TC in Annapolis MD
I mean time will tell? Foam itself is an abrasive agent with or without any coating on it so theoretically could cause harm either way for transportation purposes Im excepting of this. If I notice anything breaking down or flaking I will replace the foam , although I hope it holds up for a long while. Thanks for sharing your thoughts though and take care.
@@RandoWayne good, hope it works out well for you, new sub.
Thank you