LG NEXUS 5X BOOTLOOP FIX 2020 | I FIXED IT WITH MY UNPROFESSIONAL HANDS
Вставка
- Опубліковано 3 жов 2024
- It was running fine and i made a review video 3 weeks back but after posting the video the very next day i was scrolling the contacts and my phone got freeze for few seconds then it turned off and google boot loop started i tried to fix this issue with modified rom i heard that rom disable some cores it would reduce the performance but phone will work fine but that didn't worked then i saw a video of a person putting some heat on the back of the phone with the hair dryer and his phone turn on for few minutes that step is good for doing backup but long lasting fix is possible by putting some heat and solding solution to the processor which i did in this video you can follow the same steps but be careful while removing the connector strip of battery screen etc don't use blade to open them it will damage the ribbon i didn't know that time but luckily no damage happen with my phone in the process I made this video three days back and its still working fine.
I will post in the comments if it will start this issue again.
Hope it will help.
Please don't forget to subscribe
THANK YOU
Required things
Cutter, Guitar Pick just to open the back cover, Heat Gun , Soldering Paste, Thinner/Petrol and Toothbrush to clean the board.
It'll work 100% :)
what is the thinner/petrol used for?
Hi, thanks for the video.
is it still working fine?
It died after 10 days of usage
@@CelloGraph yeah mine died after one day...
should i change the main board or just throw away the device?
Changing the board ain't gonna work. Better to change the device.
This is old, but leaving a tip for all.
To easily remove the back cover, remove the sim tray, with that you expose a bit part of the cover and allowing to pull it a bit to insert the plastic pick.
it works for my nexus 5x thank you brother
Good to hear that bro
Thanks, got 2 phones have the same problems. Boot loop. It seems that is the huge problem for LG
Nice, video. What type of soldering solution you are using?
Its a normal soldering solution it came with solder
Did i just buy a faulty phone?
If it's 5x then unfortunately yes
So do I it's not even coming on wish I knew this before I bought it only had it a fee days now bought 2nd hand off eBay
I used hair dryer but not working😭😭
Try to put heat on top portion where the chipset located
Is it permanent fix or just for couple of days? I bought mine to try some alternative software, plasma mobile. I rather expected some software issue but it's definitely hardware. So I bought crap, whis is like anything else from the google.
There's no permanent fix and this procedure can give a week life atleast
If I buy a refurbished Nexus 5x on Aliexpress, is there a risk of experiencing this bootloop problem?
It will occur again. It's actually the faulty board design that cause this issue.
What happens when the SoC gets in direct contact with the heat ?? It had worked the first time then the error came again. I did it again and the device worked again. The device has no root and the bootloader is too. I installed Substratum the next morning and Andromeda from XDA ran the script on the pc. Later, the device did not start anymore and stayed in fastboot mode. Now it does not start anymore. So I ask if it can be that it does not start because the Snapdragon was too hot. because otherwise everything looks good. ??????
I just need to turn the device on to back up some photos. What is this hair dryer heat up method?
Just put the heat on the back of the phone it will work till the phone comes back to the normal temperature
thank you for the video too i find myself hace of the days and is working ok
Very good, but how long will it be in operation?
For a week mac
Max*
I really wish i had this 3 years ago..
How did u fix
@@wickedstar6066 I didn't 😣
Oof
How long did this solution have phone working mine only lasted a few hours?? So if I do the whole update is that a waste of time?
After 10 days of usage it died again
@@CelloGraph thanks im going to try the abd firmware technique I'll let u know how it goes
Hi. My nexus 5x touch not working. This method working ?
Still working ? and what you put on CPU before you heat it ?
Normal solding solution
It died again after 10 days
Sir in this video where are you used thinner/petrol?
To clean the dust from the processor
Mine didn’t even do that, it just completely died and when you go to put it on charge a red light comes on at the top. 🤔
Put it on charge for atleast an hour then try
TDG Tech thanks! Will try that although i think it’s done for it died months ago and only recently found the phone again 😂🤦🏻♀️
Haha try and let me know if it works
i face the same problem i think we have a battery problem not bootloop so i have ordered a battery to check if it works
Prakash chaudhary ooh tell me if your phone works after replacing the battery please! I have a new phone now but I do miss my nexus so would like to see if it was the battery that was the problem.
Not working method. You need rebolling CPU + RAM
I try this but only 2 hours my phone is working
LG are usually let their smartphone get bootloop
if i dont update my phone,can bootloop will happen.. i dont know english good..please help me... i want to buy a lg g5 phone..for this bootloop issue i am very confuse ,what i do
It has nothing to do with the update its a hardware defect.
thanks..
don't buy the G5, it's crap.
What is this yellow paste?
Soldering solution
Is there any alternative to soldering solution?
again same problem
How many times can this be done until it permanently dies and cannot be revived again?
It can be done multiple times but there's no permanent fix unfortunately
Hello, just wondering still working tour phone with this method ?
After 10 days of heavy usage it died again
CelloGraph maybe hou Should update the video description
I put mine in the freezer and it semed to work
que es esa crema que le pones arriba del procesador; help por favor
Creo que es pasta flux para soldar, tambien lo venden en liquido.
si el idioma del tipo es ingles, porque le preguntas en castellano?
Hai sir..is it glue??
is it still working?
It died again after 10 days of usage
It will work on nexus 6p
Yes
It will work on nexus 5?
Помогло
Работает ещё?
@@max_sobyanin да
@@Zenderman85 буду пробовать ✌️
@@max_sobyanin Нет. Так же в луп ушел
Перестало работать