Can confirm, it does work. It was a bit scarry installing it but, it works. I scanned 5 cards with the original part and it had clear indentations. I ran another 5 cards with this 3-d printed part to compare. On one card I did notice the penny sleeve had a mark, but the card itself was perfect. Personally, I wouldn't want to sell cards after scanned with the original part.
So sorry but due to the hurricane damage and complete insanity, I have been away from comments etc.thanks a ton! we were a little delayed in getting these out due to the weather but we are now back up without issue.
Just bought this scanner and will definitely be ordering this. Are you still advising against using this scanner for cards in toploaders? Thanks for the content! Glad to have found your channel.
Without a doubt there is no way I would use this scanner to scan top loaders. I Can tell you that it was not on my first run that it scratched. It took a while (maybe 100 cards) but then one happened to hit it the wrong way and that was that. To be clear, there is not fix from Fujitsu. They were kind enough to help me but that required a new scanner to be shipped. My take on this is not to use toploaders.
So sorry but due to the hurricane damage and complete insanity, I have been away from comments etc.I was not shipping overseas but today I made an exception for a person in France. I can open international shipping but I just find that it is not cost effective. I offer the part for free to download and take to a person or company who has a 3d PRinter. however, if you cannot find that, then yes, just email me at tarek@maxwaxpax.com and I will get you setup.
@@thomasnicholson936 ok got it fixed and now we have ground advantage which is something usps is now having stores like ours use. Since I did not know that I did not have that option active. I have recreated an invoice for you and issued you a credit of $4.28 which should appear back on your card shortly. Sorry about that and thank you for your patience.
Can confirm, it does work. It was a bit scarry installing it but, it works. I scanned 5 cards with the original part and it had clear indentations. I ran another 5 cards with this 3-d printed part to compare. On one card I did notice the penny sleeve had a mark, but the card itself was perfect. Personally, I wouldn't want to sell cards after scanned with the original part.
This is amazing! Ordering now
So sorry but due to the hurricane damage and complete insanity, I have been away from comments etc.thanks a ton! we were a little delayed in getting these out due to the weather but we are now back up without issue.
@@maxwaxpax You are the GOAT, I just installed and no more lines. Will be sharing this video all over.
So this fix stops the indent line on my cards? I have an 8170 that is marking just about every card. Thanks for the great video
yes this is the fix to stop the indentations in the cards. This should help you but please let me know if you have other issues.
Just bought this scanner and will definitely be ordering this. Are you still advising against using this scanner for cards in toploaders? Thanks for the content! Glad to have found your channel.
Without a doubt there is no way I would use this scanner to scan top loaders. I Can tell you that it was not on my first run that it scratched. It took a while (maybe 100 cards) but then one happened to hit it the wrong way and that was that. To be clear, there is not fix from Fujitsu. They were kind enough to help me but that required a new scanner to be shipped. My take on this is not to use toploaders.
@@maxwaxpax Thanks so much for the quick response! So glad I watched your videos before I set mine up.
Do you deliver to Sweden ?
So sorry but due to the hurricane damage and complete insanity, I have been away from comments etc.I was not shipping overseas but today I made an exception for a person in France. I can open international shipping but I just find that it is not cost effective. I offer the part for free to download and take to a person or company who has a 3d PRinter. however, if you cannot find that, then yes, just email me at tarek@maxwaxpax.com and I will get you setup.
Did you remove the brake rollers too?
yes that was the first thing we did.
@@maxwaxpax Thanks for making this available. Really appreciate the work you put into it. Excited to test it out.
@@shane396 it is my pleasure.
Please allow shipping to canada. I have tried to email you but your site will not allow me to email or ship to Windsor, ON.
Email me tarek@maxwaxpax.com
Order in TY
Thomas - did you mean to pick UPS? I noticed that the shipping was high and wanted to make sure my site did not mess up and force you to pick that.
@@maxwaxpaxthat was the cheapest option presented.
@@thomasnicholson936 I am going to check what happened and see why this was the only option. If I can fix it I will.
@@thomasnicholson936 ok got it fixed and now we have ground advantage which is something usps is now having stores like ours use. Since I did not know that I did not have that option active. I have recreated an invoice for you and issued you a credit of $4.28 which should appear back on your card shortly. Sorry about that and thank you for your patience.
Thank you, Otis.