Thnks alot just got the hoss for my birthday, thks to you I now know how to have fun with my traxxas hoss. Thanks for making this video ur explanation greatly appreciated
Thank you so much. the first time you were doing Oillie's i looked up how to do them, but you explained it much better. You're fun to watch too. You really do have so much fun with your RCs.
Great video! It’d be great too see you trying these tricks with the Losi LMT and the Hoss in the same video to see the difference between a bashing truck and a fixed axle truck; their pros and cons etc.
The Rustler really doesnt do tricks all that well, at least not stock. I've never tried to 2 wheel it. I know you have to use a ramp for backflips. It takes forever to get it to spin in the air. Its just not what I would call a trick RC.
Good stuff man. I really like that Hoss. I think I am going to attempt to convert our Stampedes into Hosseses. I think it'll run about $150 in parts or so. Just got the Hoss Sledgehammer tires in the mail for my sons Stampede.
Been watching your vids for a while now, didn't know you were a fellow trucker! Sounds like you pull wiggle wagons. Gonna buy an RC now that I'm not OTR anymore and can more easily enjoy hobbies. Thanks for the great and informative videos, and keep the greasy side down!
✌🏻😎🏴Love the trick videos dude. 14: ? Was a 2wheel clip flip/ wheelie clip flip & 15:30. That’s the kick flip I was talking about in your last trick video. Off the ground it’s called a 180 flip or kick flip if your into skateboarding. The one off a flat surface or curb where I broke a toe link 😂. Off the ground or a curb/sidewalk it’s called a reverse flip 180. Off a ramp/jump the 180 is a switchblade & the 360 is a balisong AKA butterfly knife.
I used to be into skateboarding. I would watch Rodney Mullen videos and go out and do tricks I learned from him. I was pretty good at flat land tricks.
I like the way you used 28'&53' wagons about input when stunting...got ARRMA Senton 4x4 brushed motor, I've been working on using the D/R steering keeping it dialed back and steering with my go finger, 2wd Rustler was good practice vehicle too...that hoss really looks like a blast...no pun intended (lol)...
i have followed your steps on the HOSS and i've also taken to practice your how NOT to blow tires, basically a good all around what not do when driving. it was a great refresher. Problem i'm having is even with a simple bunny hop onto a curb the driveshaft shatters and it's ALWAYS the same one. front right. i've shattered the composite, heavy duty composite and the metal driveshafts. i've reconfigured the ESC to reduce brake power. I don't know what else it could be. I have a MAXX, a Rustler, and that arrma brand of 1/8 1/10 vehicles. This hasn't happened to any of those. i'm at a loss because this truck is so damn fun to me. i wish i could keep it running for longer than half a battery charge.
I'm not sure exactly what is going on. I've been really rough on mine and I havent had those issues like that. Check and make sure you bearings are ok.
@@outsourcedrc i THINK may have figured it out. the ONLY difference i can attribute this to is the C rating on the batteries that i am using. They are 3S 5000mah 100-160C discharge. i''ve ordered another set of the OEM composite shafts and am going to attempt everything again with a set of 3S 5000mah 35C-60C batteries. i can't think of any other root cause that it would be. bearings are all in tip top. Currently i have the TEKNO RC brand Slash 4x4 output CVDs. no issues with the 100C rated batteries. Tekno RC 6851x FRONT Tekno RC 6852x REAR
@@rogueFactor lol 160c good lord. i was doing this with 50c burst batteries. I bet thats part of the problem. remember, the hoss has no clipper or cush drive to absorb the impact in the drive train
I'd go with the Hoss personally, unless you realize what the Maxx is and thats what you want. I think that the maxx just rolls too easy and it takes a lot of money to make it not so top heavy, how ever the maxx is super tough.
Great and Informative video again. How do you like the Hoss vs your Maxx? I just finished over the weekend adding the wide maxx and that video really helped me. Thanks
@@MrMindExpansion I just started building yesterday, the 45. I had to reduce the width to just 2ft because I need to fit that into my trunk and still have enough space for my kid's booster seat. Hopefully that reduced width still allows me to aim for it at fast enough speeds (1/10th scale JLB Cheetah)
@@pascalsiekmann4454 Most of them do. It doesnt flip forward as fast, and wont do a backflip without the ramp unless you have a lot of height, but most tricks work with it.
My friend broke the stock center diff in half by landing on power. He beats the crap out of his cars though and isn't too savvy with RC's in general. He also broke a hand full of stock drive shafts with his Hoss already. He keeps using the self righting feature and it's honestly not s good idea to use it with the Hoss.
I need to know e-Revo or hoss I live in Arizona so lots of dust and off road I have small skate park but I have a little jump in my backyard I’m going towards the e-Revo because of the in board shocks and it has a wider stance I have 1/16 slash and with the e-Revo it’s a similar design I’m willin to work on it a lot. The hoss I just want it for stunts but it seems to have more problems than the e-Revo. I can only get one. My ramp is a little smaller than your super small ramp but it is a cardboard box it’s about 2 feet wide
Ok let's be real what I want to know is after time. How many parts need to be replaced after all the hopping. Is it hard on drive line. I just don't trust all the hard hopping . And what it takes to fix any issues . This car is in a mid price range . Is it worth it. For price . I'me thinking your gonna break even metal drive lines. Taking the fun out of car. Can you keep us up dated on breakdowns. And how they happened. Or if it's solid. After small repairs. Thanks Kev. I like this truck but don't want a repair car.
After the first run of using my Hoss the front diff was bad spur gear was chipped and the gears were binding straight from the box they didn't believe me when I called Traxxas they sent me a new spur gear and new back control arms because the screws were stripped in those two and just hanging out and the bearings in the motor went bad
Annnnnd noone cares about the Hoss ....even Hoss owners. Its an awful truck and i cant think why you wouldnt buy a Maxx. I sold my Hoss after 2 days. It just wouldnt stay straight felt all kinds of wrong. Traxxas screwed up on this one
Dude. I actually said something a year ago but I keep going back to this vid. Great job!!
Thanks!
I bought it last week, it’s a cool RC. Thank you for the review.
Just got a hoss , thanks for all the information and time spent on the outstanding content.
Awesome! You are going to love it!
Same, I am looking at this page to learn what I can and cannot do with the Hoss.
@@No.Soy.Chan. I ended up putting gtr shocks on mine right away basically. They seem to make it a lot more plush and smoother to drive .
Thnks alot just got the hoss for my birthday, thks to you I now know how to have fun with my traxxas hoss. Thanks for making this video ur explanation greatly appreciated
Thank you so much. the first time you were doing Oillie's i looked up how to do them, but you explained it much better. You're fun to watch too. You really do have so much fun with your RCs.
Thanks!
Wuuuau! Thank,s for this wonderfull class ! I loved Hoss!
Great video! Thanks for going through all the trouble.
Super traxxas hoss and fantastic video big like👍👍👍
Awesome video. Thanks for sharing. Lovin my RC's...
Great video! It’d be great too see you trying these tricks with the Losi LMT and the Hoss in the same video to see the difference between a bashing truck and a fixed axle truck; their pros and cons etc.
Beautiful slow-mo editing at the 4:45 mark. Subtle yet effective. That was great as was the explanation on how to '2 wheel'. Really good stuff!
Thank you very much
We really appreciate your advise
Thanks for sharing this. I'm not very good at this and stopped trying because i started breaking things 😅
great video - thanks
Awesome video man thanks!
No problem!
Great informative video, thanks.
Could you please do a video of how to do tricks with the traxxas rustler 4x4. Keep up the great work love your videos!😁
The Rustler really doesnt do tricks all that well, at least not stock. I've never tried to 2 wheel it. I know you have to use a ramp for backflips. It takes forever to get it to spin in the air. Its just not what I would call a trick RC.
Thanks buddy that was helpful 😎👊
No Problem!
Great vid 👍 thanks for sharing your tips 😊
Amazing videos thank you very much , do you have any video how to make those ramps ?
Good stuff man. I really like that Hoss. I think I am going to attempt to convert our Stampedes into Hosseses. I think it'll run about $150 in parts or so. Just got the Hoss Sledgehammer tires in the mail for my sons Stampede.
Been watching your vids for a while now, didn't know you were a fellow trucker! Sounds like you pull wiggle wagons. Gonna buy an RC now that I'm not OTR anymore and can more easily enjoy hobbies. Thanks for the great and informative videos, and keep the greasy side down!
Thanks! Yeah I drive for SEFL. Twins mostly. From Atlanta to Columbia.
@@outsourcedrc thanks for the tip at 6:18mins, I kept breaking my front drive shaft every time I did wheelies
This is quality content brother your driving is exceptional ,lets see some big front flips with the xmaxx man that would be sick !!!
Nice video bro ❤️ I love watching all your videos especially this one which help us a lot.I just bought a maxx v2 and you help me a lot bro,Thank you
You are welcome!
Yo I did the wheelie front flip on accident but know I know how to do it on purpose, thanks for the tips!
Now you know!
✌🏻😎🏴Love the trick videos dude. 14: ? Was a 2wheel clip flip/ wheelie clip flip & 15:30. That’s the kick flip I was talking about in your last trick video. Off the ground it’s called a 180 flip or kick flip if your into skateboarding. The one off a flat surface or curb where I broke a toe link 😂. Off the ground or a curb/sidewalk it’s called a reverse flip 180. Off a ramp/jump the 180 is a switchblade & the 360 is a balisong AKA butterfly knife.
I used to be into skateboarding. I would watch Rodney Mullen videos and go out and do tricks I learned from him. I was pretty good at flat land tricks.
Another great informative video mate keep up the good work :)
Thanks!
I like the way you used 28'&53' wagons about input when stunting...got ARRMA Senton 4x4 brushed motor, I've been working on using the D/R steering keeping it dialed back and steering with my go finger, 2wd Rustler was good practice vehicle too...that hoss really looks like a blast...no pun intended (lol)...
Thanks! I hear the Senton is a good RC. The hoss is awesome! Its one of my favorite small RC's
“ you don’t want to be on the throttle or break when you land”
Immediately lands on full throttle
i have followed your steps on the HOSS and i've also taken to practice your how NOT to blow tires, basically a good all around what not do when driving. it was a great refresher. Problem i'm having is even with a simple bunny hop onto a curb the driveshaft shatters and it's ALWAYS the same one. front right. i've shattered the composite, heavy duty composite and the metal driveshafts. i've reconfigured the ESC to reduce brake power. I don't know what else it could be. I have a MAXX, a Rustler, and that arrma brand of 1/8 1/10 vehicles. This hasn't happened to any of those. i'm at a loss because this truck is so damn fun to me. i wish i could keep it running for longer than half a battery charge.
I'm not sure exactly what is going on. I've been really rough on mine and I havent had those issues like that. Check and make sure you bearings are ok.
@@outsourcedrc i THINK may have figured it out. the ONLY difference i can attribute this to is the C rating on the batteries that i am using. They are 3S 5000mah 100-160C discharge. i''ve ordered another set of the OEM composite shafts and am going to attempt everything again with a set of 3S 5000mah 35C-60C batteries. i can't think of any other root cause that it would be. bearings are all in tip top.
Currently i have the TEKNO RC brand Slash 4x4 output CVDs. no issues with the 100C rated batteries.
Tekno RC 6851x FRONT
Tekno RC 6852x REAR
@@rogueFactor lol 160c good lord. i was doing this with 50c burst batteries. I bet thats part of the problem. remember, the hoss has no clipper or cush drive to absorb the impact in the drive train
Great vid man! Thanks for the info!!
I'm a truck driver as well hell yea! Getting an e-revo 2.0 for my first serious rc car and hopefully as they say I can keep the dirty side down c'mon
You can do it! Its an awesome RC. You will love it.
Keep it up buddy!!
Excellent vid n excellent to see you’ve reached 10k subs well done 👏
Thanks!
I gotta try the backwards cork screw trick, good stuff bro!
Thank u this was a great video. I only have an Xmaxx n don’t know how to do the tricks. I am going to see about getting a ramp. 😊
You are better off building it - the xmaxx is so wide you will need two ramps sitting together ☺
Congrats on 10k subscribers, I love your videos
thanks!
Dude you're a wizard
Can you made a Maxx vs Hoss video?
I might.
Kevin Talbot made a great video on maxx vs hoss
@@outsourcedrc That would be nice :D
@@erborstorewouno2007 Yeah, but I like Outsourced RC's version of making videos better :)
Maxx wins
Good tip
👍 👍 👌
I'm considering between maxx and hoss. The lighter it is, the better the jump and less damage to car? Should I get hoss instead? Thanks
I'd go with the Hoss personally, unless you realize what the Maxx is and thats what you want. I think that the maxx just rolls too easy and it takes a lot of money to make it not so top heavy, how ever the maxx is super tough.
I learned to back up a rig with a single axle day cab and a 28ft trailer....trial by fire right lmao
Love your videos
What side are does ramp?
Thanks! I both ramps are 4feet wide and about 4 feet long. One is 45 degrees and the other is 30 degrees
@@outsourcedrc thank you
My brother in law just make me one
I am a rookie on RC
But I am practicing with my MAXX 🤗
I know your large ramp is 45 degrees. What are the angles and dimensions of your 2 smaller ramps? Thanks
We’re leaning towards the Hoss and we’ll go with a Traxxas battery
Do you use the 3s 5000 11.1 with yours?
Please advise
A Subscriber
Yes! Thats exactly what I use in it.
so will the arrma typhon have the same problems because it doesn't have a slipper clutch
I dont know, but it should not be as bad at least because I'm not doing ollies with it
Thanks it’s helpful for me I appreciate good job 👏
Love your videos and tips brother! Could you do some Arrma stuff too? BASH ON!
Thanks! I dont have any Arrma stuff! I kinda want one. I need to decide which one to get.
You have to hit the jump perfectly straight. To prevent cartwheeling in the air
Hi! I'm looking into buying a new RC, which one do you like more? Maxx or Hoss?
Hoss. Easy choice.
@@outsourcedrc Thanks for the answer!!
@@outsourcedrc Btw, what is it that you like more with the Hoss?
@@willabytes A lot less money and it just drives better. It does tricks.
@@outsourcedrc Ok :)
Great work with these tricks. Do you think the wheelie can be improved to help with ollies? I don't have a Hoss
The Wheelie bar? I'm not sure. maybe.
Great and Informative video again. How do you like the Hoss vs your Maxx? I just finished over the weekend adding the wide maxx and that video really helped me. Thanks
Glad I could help! I like the Hoss better. I may be my third favorite RC behind my clodbuster and E Revo 2.0
Cringe 😂
Correct me if im wrong this looks as fun as the erevo 2.0?
Pretty much
Great video! Where did you buy / build the ramps?
He made a tutorial vid if you check his page.
@@MrMindExpansion yep I saw that after the comment. Great video too!
@@yenghooitan5666 definitely! I made the 45. Probably gonna make a 30 deg this weekend lol.
@@MrMindExpansion I just started building yesterday, the 45. I had to reduce the width to just 2ft because I need to fit that into my trunk and still have enough space for my kid's booster seat. Hopefully that reduced width still allows me to aim for it at fast enough speeds (1/10th scale JLB Cheetah)
@@yenghooitan5666 haha! I did the exact same thing for the same reason
Love ur vids have a great new year...
Nice thumbnail bud!
Thanks!
My dad hated that trailer thing at the end, he gets mad when the small trailer turns fast
Steering trim is a bit off to had to adjust it to nearly negative to make it go straight.
Pleeaase get a Bandit and make a video of it, i don’t care which model just pleeaase
Are these tricks easier to do with a 3s?
My traxxas hoss it’s not doing wheelies it’s making a Shuss shuss sound what do you think that could be
Funktionieren die gleichen Tricks auch mit dem Traxxas Maxx?
I'm sorry, I dont know what you are saying! I only speak english.
@@outsourcedrc Do the same tricks work with the Traxxas Maxx?
@@pascalsiekmann4454 Most of them do. It doesnt flip forward as fast, and wont do a backflip without the ramp unless you have a lot of height, but most tricks work with it.
guck mal mein channel wenn die RC freestyle magst !
These are simple things all rc's can do.
Just got my traxxas Hoss few days ago is it normal to have tire wobble going reverse?
Pedro Sanchez what do you mean by tire wobble?
jarrett maltry I hit the trigger on the control to go reverse and the tires go side to side They don’t go strait.
That's typical for most RCs. I've got Losi's and Traxxas RCs and both brands do it.
Mine does that. Its normal.
My friend broke the stock center diff in half by landing on power. He beats the crap out of his cars though and isn't too savvy with RC's in general. He also broke a hand full of stock drive shafts with his Hoss already. He keeps using the self righting feature and it's honestly not s good idea to use it with the Hoss.
Yeah the Hoss is only as tough as the driver lets it be.
I need to know e-Revo or hoss I live in Arizona so lots of dust and off road I have small skate park but I have a little jump in my backyard I’m going towards the e-Revo because of the in board shocks and it has a wider stance I have 1/16 slash and with the e-Revo it’s a similar design I’m willin to work on it a lot. The hoss I just want it for stunts but it seems to have more problems than the e-Revo. I can only get one. My ramp is a little smaller than your super small ramp but it is a cardboard box it’s about 2 feet wide
buy a maxx, my buddy has a revo 2.0 and he’s breakin push rods alot
and the pillow balls always pull out too
@@newfonewhodis5156 how about limiting straps
@@newfonewhodis5156 is it hard to put them back in
E revo handkes like nothing else man. Things agile as hell and feels soo responsive
Ok let's be real what I want to know is after time. How many parts need to be replaced after all the hopping. Is it hard on drive line. I just don't trust all the hard hopping . And what it takes to fix any issues . This car is in a mid price range . Is it worth it. For price . I'me thinking your gonna break even metal drive lines. Taking the fun out of car. Can you keep us up dated on breakdowns. And how they happened. Or if it's solid. After small repairs. Thanks Kev. I like this truck but don't want a repair car.
My dad just bought me the hoss for my birthday present on June 22
Awesome! Happy birthday!
Did you find out if the maxx could bunny hop like the hoss?also great vids keep it up
I have not! I will though.
Outsourced RC k hope to see a vid soon
Outsourced RC our maxx just arrived at the hobby shop can’t wait for it what batteries do you recommend for it?
@@epicgorilla8612 I use the one that Traxxas recommends for it. Its their 4s 5000 mah #2889X
Outsourced RC 👍 thanks
Traxxas told me to use 30 weight differential can I use 80 cuz that's the lowest I can find around Morgantown LOL
After the first run of using my Hoss the front diff was bad spur gear was chipped and the gears were binding straight from the box they didn't believe me when I called Traxxas they sent me a new spur gear and new back control arms because the screws were stripped in those two and just hanging out and the bearings in the motor went bad
And the ollies will heat up the motor quickly.
Which one do you like more, the Hoss or the Maxx?
The Hoss.
Can you do a wheelie
Is your brother blippi
I dont understand.
Hope the tacos were good!
They were fantastic!
I enjoyed a great video let's be friends😊😊
우리 친구 해요!!!
4th view 1st comment lets go
Nice face bro stay strong
My Hoss is a pile of shit, the key way inside diff keeps stripping, Traxxas warranties the part but the down time sucks...Maxx has never broke
3rd view
beautiful pleace you live in
Is that youre dad at 18:12?
Yo can I get a shout out
I dont do shout outs. If I did it for you, I'd have to be fair and do it for everyone else, And I just cant do that.
Outsourced RC ok but please sub
Annnnnd noone cares about the Hoss ....even Hoss owners. Its an awful truck and i cant think why you wouldnt buy a Maxx. I sold my Hoss after 2 days. It just wouldnt stay straight felt all kinds of wrong. Traxxas screwed up on this one
I have a max and its super good
I enjoyed a great video let's be friends😊😊😊
우리 친구 해요.!!!