Camshaft Position Sensor Replacement - Nissan Micra K12
Вставка
- Опубліковано 21 сер 2024
- Removing and replacing the camshaft position sensor on a 2003 to 2010 Nissan Micra K12 with 1.0 litre petrol engine. Some of the most common bad crankshaft position sensor symptoms are an illuminated check engine light, the engine won’t start or it stalls, the engine misfires or runs roughly and you might have reduced fuel economy. If you’re renewing the sensor, the part number is 237314M505. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Camshaft Sensor ~ amzn.to/3Oqwcsx
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
Wollte fast schon bei meinem 1.4L 16V die ganze obere Abdeckung etc. zerlegen, aber man kommt auch ohne Entfernung aller dieser Dinge eurer Anleitung an den Nockenwellensensor ran. Man beuge sich weit über den Motor, am besten eine Schwanenhals-Magnettaschenlampe am Bremskraftverstärker platzieren (zwischen Motor und Fahrgastzelle); man kommt auch mit großen Händen an den Nockenwellensensor mit einer kleinen Ratsche oder Schraubenschlüssel. Einfach Stecker abziehen, 10er Schlüsselweite, dann Sensor austauschen. Trotzdem Danke für diese saubere detaillierte Anleitung.
Thanks for you comments
I'm a french nissan micra driver and your video helped me a lot ! Thanks a lot !!
You are welcome!
I recently had to change the Camshaft Sensor myself. However, all I did was to take out the air filter filter and the removable filter cover and I got it from there using a small ratchet with a 10mm socket. There is no need to pull out the air box.
A great step by step video thank you I will now commence to change my camshaft sensor on my Nissan Micra with confidence now I’ve seen your video 👍
Thanks for watching !
Cambshaft bolt 7.1 - 10.8 N·m (0.73 - 1.1 Kg-m, 63 - 95 in-lb)
Bravo 👍🏻
Thank you !
Thanks for your very helpful video!
You're very welcome, thanks for watching !
i just changed my micra 2004 camshaft sensor, asked 3 workshop to check the car can't start. the 3rd workshop find up this problem and it cost me 1300 dollar for the parts and repair.
This was very helpful thank you!
You're welcome !
Just take off the airxintake pipe and acces the sensor by taking off the air filter.Way easier.
Hi!
I’ve been watching your videos for couple years and you have helped me a lot on fixing my car. I have one question if you could answer I would appreciate it.
I’ve had couple months planning to change my camshaft sensor due to engine check light and camshaft sensor faulty code. I’ve been really lazy and have not changed my camshaft sensor and now my car don’t crank and dont start. Do you know what may be the issue. I know it’s because I did not changed the camshaft sensor but do you what could me the damage?
What could be the damage* or what’s best way to check possible damages?
Bonjour super vidéo et je voulais savoir par hasard si vous pouviez m’indiquer où se trouve le capteur pmh ? Avez vous fait une vidéo dessus ? Merci
my micra also does not start or starts from 5 times. P0340 "check engine" error is on. It starts when I turn off the camshaft position sensor. changed the camshaft position sensor 3 times, with used auto. It's most likely the timing chain, but I'm not sure. micra 2004 177k miles on clock
Man, that sucks, how is it going now, did anything solve the problem eventually?
What are symptoms of faulty/bad camshaft sensor
Check this link out: cartreatments.com/camshaft-position-sensor/
shit, i had that broken. i drove and parked car normally in the evening, and all the sudden, it didnt want to start at the morning
Did your gauges flash when trying to start?
Un vídeo por q no hacelera el micra
i have P0340 fault code in my Nisan micra 1.2 2003 is this the part that i have to change and is it the same for 1.0 and for 1.2
It's most likely the camshaft sensor causing the fault code. I think the part should be the same for the 1.2 but I would double check the part when you remove it, just to be sure.
I am having hot start problem with my K12. I tried to change the Camshaft sensor but in vain. One thing I noticed while changing the sensor, it was covered with engine oil. Is that normal?
The entire sensor or just the part that fits into the cylinder head ?
What issues are you having when hot starting ?
@@screwsnutsandbolts it is taking long to start. Like 4 to 7 seconds.
my sensor i tried so many times to remove it after removing the bolt , is there any other way ??
bonjour, pourriez vous me dire ou se trouve exactement l'emplacement de capteur A AC sur ma nissan micra k12 essence 1,2 de 2003 bte auto. merci. cordialement. daniel.
I don't know Danial, I'm sorry. I have never worked on the automatic transmission k12.