Bosch dishwasher repair maintenance (vids and slides) on water inlet SGS45M12EX/35
Вставка
- Опубліковано 22 чер 2017
- ** NEW DOWNLOAD REPAIR MANUAL LINK (pdf) **
drive.google.com/file/d/1mTaH...
My sincere apologies for using the "starwars-scroll-text", I did not know many people hate it. YT does not allow any updates later on and I do not want to loose all the responces.
Where I thought to be replacing parts, I ended cleaning up! This can happen to all dishwashing machines, but in my case it was a SGS45M12EX/35
It just took me some time and effort to get there. The trick with the electrical wire and stainless cloth really did it for me. - Авто та транспорт
After cleaning out the water matrix and the other parts I spent two days trying to find out why it was emptying as quick as it was filling this video sorted it out. I couldn't believe how much crud was in the pipe from the filler to the sump. Thanks a million. XXXXXXX
Thanks Ernie.
This fixed my 15 old Siemens se50t590 machine. The washing cycle was running but without any water inside. So all symptoms were pointing to the water inlet or rather water supply circuit coming in than out anyways. But no, cleaning that same outgoing tube with a thin brush was enough to get water flowing into the machine again.
I was not far from giving up, so thank again for your great video.
For info, before this problem occurred, the machine was already intermittently showing a drying problem at the end of the cycle with the display stuck at "final rinse 1 min left" and not going into the final drying stage. I am hoping this was a consequence of not having enough water to trigger the drying phase (rather than a defect of thr heating element) . Time will tell.
I have now done one full cycle, the machine filled up with water normally and dried fine. Cheers.
Great video! I had a similar problem with a newer Philco that is very like the Bosch brand.
I disassembled the outlet pump, the salt deposit and the laberinth of inlet- outlet water and cleaned everything thoroughly.
Geweldig goede uitleg. Met succes gevolgd. Aanvulling volgens eigen ervaring. Ik heb de vlottereenheid eerst verwijderd en daarbij de aanvoerbuis ontkoppeld. Deze aanvoerbuis is verstopt waardoor het toestromend water niet de machine bereikt en de vlotter omhoog geduwd wordt. Bij de losse buis een bakje geplaatst en vervolgens de kabel met staalsponsje prop erdoor geduwd. Hierbij kwam een dikke prop vuiligheid 7 cm in het bakje. Het vlotter bakje is goed uiteen te nemen en te reinigen zodat de vlotter ongehinderd kan bewegen. Verder linksboven in het transparante water aanvoer afvoer buizenstelsel zit een rood opluchtingsklepje in een aparte kamer. Dit vervuilt ook ernstig. Door er heet water met veel opgeloste soda in te gieten van 2 kanten was dit stukje bij beetje loste weken en de vlokken vuil met warm water eruit te spoelen.
Ook deze info heel bruikbaar, dank!
You are the man! Your trick worked like a champ for me after understanding the flow.
Great to read I could help someone again with my experiences, hope it will last for another lifetime :-)
Thanks for posting this Ernie. It was invaluable in diagnosing the problem with my Bosch dishwasher.
Thanks for letting me know, will motivate to make more!
Exactly the same problem on my Siemens machine. I removed the assembly for cleaning as well. Thanks for the vid.
I just fixed my Bosch dishwasher. Problem was stuck float in Water Level Control Assembly.
This keep the pump constantly running. Hard water/calcium deposits pretty much caked up stopping float.
I went a few steps further and took apart whole assembly and descaled parts and float with CLR cleaner and brushes.
Cleaned Styrofoam float on bottom and all moving parts. (Red push-rod and other parts).
Works as good as new now.
Thanks for video.
Always appreciate videos like these that take the time to help others.
Ernie, you are a legend!!
After being pointed at the inlet valve by so many people I took your advice and whipped the side off my machine and it looked exactly like yours. I did the same fix as you and now it's working like a dream. Thank you very much for posting this video.
Bedankt Ernie, zonder jouw uitleg er niet in geslaagd.
One of the best videos I have seen superb.
Thank You ever so much! I just fixed my Bosch SGU 4XXX with this. I thought it would be the diaphragm that was broken. It is not obvious to se the inlet hole inside of the washer, but it is a 10-15 mm large one positioned towards the door! It is super easy. I used a 40 cm long electrical wire (2,5 mm2) took of insulation 50 mm and bent the 5-6 strains backwards as a hook. That way it went in easy and took the dirt on the way back.
Again, thank you Ernie!
Love it too when a vid can help others, you made my day too :-)
Dank Ernie, dit was precies het probleem en is nu dus opgelost! Geweldig 👍
Nouja GEWELDIG van je Kitty, om dat 'gewoon even zelf' zo op te lossen met wat hulp op YT toch? Daar doe ik het voor! Aan de andere kant, gezien de vele reacties op dit videootje, wel slecht gemaakt van Bosch dat het zoveel mensen overkomt...
Thanks for your very helpful video !!!
Dankjewel Ernie,
Echt wel heel leerzaam!
Groet!
Robert
Leuk Robert, dat je laat weten er iets aan gehad te hebben, daar doe ik het voor!
Good film, very informative and helpful
Glad you like it k-nemo, I was happily surprised to find I could solve it without spending money. Had to share this.
I had the same problem, the water came in and out all the time.
In my case it was the caudalimeter or rough paddle that was seized by lime. With which I did not give the order to the electro valve to stop the filling and start the washing. I blew it several times and it worked again
Just found your video.
You would save time by just removing the water tank/intake then pop-out the floater box out.
It can be easily taken appart and cleaned to "as new" level :-)
I do this for the last 15 years as I have had 2 Bosch of almost the same type.
I also kept the parts from the old one to revive the actual one :-)
Nevertheless, clever way of doing it but you really don't need to go that complicated ;-)
Thanks for sharing that info here Cédric, I simply did not know, nor did I have any documentation that pointed in that approach. So I chose for the simplest and most direct solution, the brushwire and thought it worked pretty well enough to display that here. Hardly anything needs to come apart.
Beste Ernie, in mijn afwasmachine Miel exclusive stroomt geen water in dus hij wast niet af en er brandt een oranje lichtje bij de start knop. Graag uw idee wat dat kan zijn. Bij voorbaat vriendelijke dank.
Hoi Ken, meestal is dat "alleen maar" het inlaatventiel, die gaan wel vaker stuk. Het is alleen zonde van je tijd/geld als dat niet de oorzaak is, dus moet je eigenlijk eerst even met een multimeter controleren of er door de vaatwasser wel 230vac op het inlaatventiel wordt gezet, na het starten. Zo niet, moet je het in de elektra/elektronica zoeken die het inlaatventiel aanstuurt. Hoop dat je daar technisch genoeg voor bent om dat eerst te onderzoeken, anders moet je er toch iemand bij halen. Zorg in ieder geval dat je je vaatwasser aangesloten hebt op een groep met een aardlekschakelaar, zodat je zelf tijdens het meten aan je inlaatventiel, of waar dan ook in je vaatwasser, op z'n minst daardoor beschermd bent. Succes
hello mine seems to be doing the same thing. Cant find any hard cable did have some plug cable around but brothers prob stole it. will post back is this fixes it. thanks for the upload!
Before i throw it off the twelve floor: how the heck you get it to pump with the door open????
Good question, it can't be too difficult. There must be simple way to either trick the door switch or by-pass it. Sorry I completely overlooked this issue when making the video. Therefor I conclude it can't be too difficult cause if it were, I would have noticed to add in the vid. I do not possess this dishwasher anymore, so can't look it up, but did find a REPAIR MANUAL, SEE NEW TEXT BELOW VID
The video is useful but that Star Wars like text-scroller effect is pain to read.
Thanks for giving some feedback. I did not know people hate that kind of text-scrollers, you're not the first disliking that part, but unfortunately YT does not let you upload an update of the same vid, or you need to restart and loose all your comments. That is a real drawback of using YT. How difficult can it be to simply overwrite your vid with a new version, but no.
I found the water management flows very helpful. i could not quite see where the wire went in...i tried on mine but failed
That's too bad Paul, you can't see it from within the machine, you'll need to guide the rigid cleaningwire by hand and feel where it needs to go. Finally once in the tube you'll see it appear through the semi-transparant pipe on the left side, as shown in the video. Maybe a little mirror and a torch might help you look "around the corner" on the inside of the machine! Good luck
Hallo Ernie,
In your case , does the dishwasher keep filling and pomping water away?
In mine case yes, even the door is open. As soon switch the main power button on it starts to fill and pomp.
Mag ik je ook beklen voor advies,
Grt,
Jim
Jim, it should be without power if the door opens, so that is one switch you can repair :-)
Indeed once started it would fill-pump-fill-pump but not forever, because once the flowcounter measures a certain amount of water taken in, it will start doing its normal program but without enough water! So dishes would stay dirty.
U r legend gr8 vdo
How did you get your wire pipe cleaner past the impeller?
I did not clean that part. I guess it doesn't get dirty so easily with the pressure from the impeller. The pipe that I cleaned now, gets water gravity fed from the labyrinth, therefor the smallest amount of dirt becomes easily a blockage.
Beste Ernie, ik heb alles gedaan wat jij laat zien maar zonder resultaat. Mijn Bosch vaatwasselijft op 1 min hangen. Zodra ik het klep open bv na een wasprogramma staat nog 1 min op en ik zie ook geen hete lucht uit komen of het water is ook niet warm. Heb je enig idee wat dit zou kunnen zijn. Alvast bedankt
Nee, geen idee, maar dat de hele machine niet warm wordt, suggereert wel dat er iets met het verwarmingselement is. Hoewel ik dan zou verwachten dat ie wel met een 'fatsoenlijke' foutmelding zou komen ipv koud verder te gaan. Hij moet ook wachten tot het water warm genoeg is, voordat ie verder mag met z'n programma. Daar klopt dus iets niet.
Ik ben geen expert, wellicht beter met een service center contact op te nemen of verder te zoeken naar een forum op dit gebied. Succes!
Ernie vriendelijk bedankt voor je reactie. Mvg
Thanks a lot for posting this, Ernie!
In my case, while the door is shut, no program has started yet, it keeps filling and emptying water forever. It seems that it is stuck in a loop. Resetting does not help.. ends-up in the same loop.
Starting a program does not help either.. it does a wash cycle but does not heat up the water..
Could the water inlet valve be behind all of this?
yep, it looks like the water inlet valve spring is broken or the valve leaking (latter is most likely) or stuck. Replacing it, in general is not complicated, but for this machine (which I no longer posess) I can't tell you if it is difficult or not. Knowing Bosch spares are easy to get and repairs like this, depending on your skill level and tools, not too complicated. Before ordering any parts, try to find the electro-magnetic valve, detache its wires (or just one), isolate the detached connectors and see what the machine does. If the same, it defenitely is the inlet valve. Good luck!
Sorry Abdo, I just realised the inletvalve is not in the machine but on the water tap connection itself. It sits in that block which forms one piece with the hose. I replaced the whole thing on another Bosch machine, not too complicated but expensive :-( So taking it apart, to do a test by interrupting the electricity to the electricmagnetic valve, is often not so easy. It means you'll have to find the right wires in the bundle comming from that waterinlet combination in the machine and disconnect them there. Then put the water pressure and electricity on again and listen/see what happens. If no water flows, the inletvalve is still okay and then it means it is opened when not yet needed. Could be the driving circuitry to the valve, could be other electronics. Can't tell from here.
My friend in my case, the dishwasher starts washing taking water normally then after 1 cycle or 2 an indication of no water appears although there is no water problem exists. I have checked the tap water connection thoroughly. Mine is Bosh make. Can you pls suggest what to do?
"indication of no water" seems you're talking about another dishwasher then this model? If it isn't it's hard for me to say, but in general dishwashers fail oftern (like here) because of dirt building up in the tubes. So I'd recommend you to take it apart and systematicly check and/or clean all tubes, reservoirs, sensors etc. Good luck!
Why these annoying moving letters??
I did not know people hated them so much even to the level of irritation !
It's a very easy way to pass a few lines of text but because YT does not allow you to edit or update your existing video, once it's out there it stays like that. Sorry, I don't use it anymore.
great video, but the way the txt is being displayed is disgustttting
yes, lots of people complain about that, I did not know it was such a big deal.
Sorry I can't edit the video or upload an improved version on the same spot, bloody YT won't let me...
goed verhaal, maar die scrollende text is rampzalig, nooit meer doen !
dankjwel, maar dat iedereen zo valt over die scrollende tekst snap ik helemaal niet. Ik snap YT ook niet, dat ik niet een verbeterde versie video op dezelfde plek mag uploaden. Dan had ik die verbetering direct doorgevoerd, want ik wist niet dat iedereen daar zó over struikelt! Nee, ik heb t wel afgeleerd na dit videootje, maar zelf vond ik het reuze handig : ik kan een heel verhaal kwijt aan tekst terwijl je ook naar de video kunt kijken. Tja vanuit video-editing-standpunt gezien, bespaart dat veel tijd!
Us
... and them ???
It looks like an informative video, but I cant stand or read, the orange star wars titles. UNWATCHABLE!
Hello Adam, that's probably because your quality setting is lower than 240p. Click in the bottom right on the toothwheel and choose for 240 or better 360p. If it was on 'automatic' your internetconnection is too slow, therefor your player in your browser deminishes the quality in order to still let it run. Have a go at it, I'm sure you'll see improvement! Thanks for letting me know.