amazon.co.jp - Aoniro J www.amazon.co.jp/dp/B01JOPP5DI/ BLF X5 / How to use the Bistro-UI. ※Bistro-UI の操作方法 BLF X5 review roomx.jp/pc/roomb/?p=1139 (Japanese)
Mine is stuck in muggle mode, tapping rapidly to enter config, I get one blink (mode 1) then it flashes, I click during the flash, or tap and it stays stuck in muggle mode
Look at 3:42 in the video. Multi-click to get into programming mode, then wait until you get the 8 flashes, then the rapid flicker. Click when the flicker starts. This should reset you back to factory. Good luck!
Jay M That would work of the menu would let you get to reset. It blinks 1 time flutters than goes back to the light. It will not go to 2 blink 3 blink and so on.
1.Repeat [Short-press] dozens of times to enter [Config mode]. 2.The eighth [Factory reset] will full-press the switch to reset it to factory default. roomx.jp/roomb/?p=1139 Although it is a Japanese article, please refer to it using Google Translate. Depending on your X5 program version, it may not be helpful...
NOW I GET IT finally!
Excellent demonstration. Also, excellent choice for accompaniment ;)
Thank you very much for sharing, you have made me clearer the operation
forolinternas.com/viewtopic.php?f=69&t=13724&p=208784&sid=ce8b20bf78883819f37f33f51a3a297c#p208784
Thank you for your comment.
Thank you also for the site link to forolinternas.com.
Nice job.
Спасибо!
THANKS
Thank you for your comment.
I hope I can be of any help to you. :)
Does it have moonlight mode?
Mine is stuck in muggle mode, tapping rapidly to enter config, I get one blink (mode 1) then it flashes, I click during the flash, or tap and it stays stuck in muggle mode
Look at 3:42 in the video. Multi-click to get into programming mode, then wait until you get the 8 flashes, then the rapid flicker. Click when the flicker starts. This should reset you back to factory. Good luck!
Jay M
That would work of the menu would let you get to reset. It blinks 1 time flutters than goes back to the light. It will not go to 2 blink 3 blink and so on.
how to get out of muggle mode, please ....

1.Repeat [Short-press] dozens of times to enter [Config mode].
2.The eighth [Factory reset] will full-press the switch to reset it to factory default.
roomx.jp/roomb/?p=1139
Although it is a Japanese article, please refer to it using Google Translate.
Depending on your X5 program version, it may not be helpful...
Is this ui same as X6?
Firmware in a torch: A solution looking for a problem.
Well that was as clear as mud.
>ちんぷんかんぷんだよ ┐(゚~゚)┌
(※意訳)
Sorry...ヽ(´o`;
残念でござる...ヽ(´o`;
(※Traditional Japanese phraseology)