@@gapfactorygaragellc I messaged them and said I’d be happy to test it because I can tell this bearing is going bad also! I’m hoping they end up sending me one. I’ll put it Thru the ringer to make sure the new design works
@@JosephNnbs it’s mainly only been with g8 kits that the bearings fail Bs the angle that the bracket puts the blow is tilted. They think the extreme angle of the blower is not allowing it to be lubricated with the oil properly causing it to fail. This new bracket she has stands the blower up straight, which is how every other kit is. If you’re putting it on your truck you should be fine since your blower won’t be tilted like ours
Im looking at the Torqstorm kit again now that its winter. liking the new bracket location.
Absolutely! It seems like it works well!
MRC’s is here
Salty I didn’t get to test this when I’ve had 3 bearing failures
They just came out with it. I’ve seen they sent one out to another person on Facebook group also to try. They used our car as a test fit
@@gapfactorygaragellc I messaged them and said I’d be happy to test it because I can tell this bearing is going bad also! I’m hoping they end up sending me one. I’ll put it Thru the ringer to make sure the new design works
Well this is unsettling new as my ts is in route
@@JosephNnbs it’s mainly only been with g8 kits that the bearings fail Bs the angle that the bracket puts the blow is tilted. They think the extreme angle of the blower is not allowing it to be lubricated with the oil properly causing it to fail. This new bracket she has stands the blower up straight, which is how every other kit is. If you’re putting it on your truck you should be fine since your blower won’t be tilted like ours
@@GoYoteSlaya ahhhh okay. That sucks hopefully they short it out to people free or small fee
Where did u get the interior Cage?
It is just a harness bar. We bought it off of a friend that had it custom made for her after she put a cage in her car.
What’s the setup on this car?
Cam converter fuel system and a torqstorm blower. Has some suspension done also
6.0 are 6.2 I no it’s a stroker motor tho
It’s a stock 6.2
What cam and injector size you running?
We have a btr custom grind centrifugal blower cam and 1650 injectors
@@gapfactorygaragellc1650?! SHIIIIIIII
@robertkrieger3341 I’m not sure on that I know our stage 3 btr all motor cam was really close to the cam we put in
@robertkrieger3341 if your going to have it apart may as wekk
She wifey material 😮😊