I'm sitting here in the dark, You said "Alexa, can you turn on my shop lights" and MY Alexa responds...I also have a LOT of those 8' strips in my shop. Woke me right up.
For a split second when Matt said check this out I though we were supposed to look at the battery charger hanging from the ceiling then he says LEDs and I'm like ohh those are nice too.
I don't care what anyone says... From this point forward, I will refer to this combo as _Stormnado._ 😁 ...and I dare say you are now Buffalo Blower. 🤣I wonder how much of your audience has absolutely no idea what you were doing there. 😂
Powerfisting AND The Crying Game reference.. what have you been watching? Seriously though, how bloody simple and awesome in that install? What else do you need to do (apart from charge piping) is it injectors and an tune?
Affordable easy mode boost. Shoulda just got the small pulley, I guess your going to show the step up change in power 🙏🥺😁. Rofl at the loctite seg. A partition between that inlet opening and the long tubes or 90 into the fender well (foxbody vortech elbo) would help a lot on charge temps.
@@SloppyMechanics I missed it, I heard about the void the warranty thing. I wasn’t saying like ya did something wrong 😜 I’m just thinking ya know your gonna end up with the smallest.
Matt, when you finish with this, would you consider passing it along to me and ill swap it onto my 81 crewcab Fairmont with a HCI 6.0/t56/4.30 gears/minitubbed with 315's...Im also using Corvette spacing and electric power steering... there is plenty of room over there. Im using Holley Terminator X and mine is a daily driver street car.
@@mikefew4232 I had a well written reply, but it seems UA-cam decided that it didn't want to let you see it. Do you have an email? I'll shoot a video for ya and explain everything I did.
The silence of the lambs reference was so funny to me.👍
L M F A O 😂
Goodbye Horses came straight to comments.
I laughed my ass off😂
Came here to say this 😂
The Goodbye Horses scene was great!
Funniest thing I’ve seen in a long time… I am still laughing.
I like the idea of these. The old man in me wishes they didn't sound like a bucket of screws in a paint mixer. Carry on.
When he started it, I thought he was going to rush to turn it off lol
I'm sure it sounds better in person.
Rollin over her with the goodbye horses loctite bit!
I absolutely love that the Mustang has been abandoned for the new Fairmont
Goodbye horses ha
Silence of the Lambs reference was outstanding ! 👏🏻😂
Gobble gobble let that turky sing!
I'm sitting here in the dark, You said "Alexa, can you turn on my shop lights" and MY Alexa responds...I also have a LOT of those 8' strips in my shop. Woke me right up.
Hahaha
For a split second when Matt said check this out I though we were supposed to look at the battery charger hanging from the ceiling then he says LEDs and I'm like ohh those are nice too.
No Jay & Silent Bob dance for the song you chose?
And you got the updated bracket. Nice
I’m looking forward to seeing how it preforms. I’m sure it will be awesome for what it is but it’s always fun to see the actual results
Honestly, I wouldn't built any performance motor without using a ATi damper. This is a bad ass build. I love it
That music clip you put in was bad ass. Took me back bro. Thank you
Mmmm she sounds lovely. Yeah, turbos are whistley and these are whooshy!
I gotta install one on my iron 6.2. Thanks for another good motivational video
I've got a Camaro-sourced LS1 sitting in a C10 and I have no desire to deal with the plumbing needed for turbos... but this excites me.
also that interior❤
I’m totally liking this build!!
And your commentary is 2nd to none….
👍🏼👍🏼
Action!🤠🪵🪨🎸🤘
Those lights are even better then those 100 watts you had
They’re still in there.
These just make those seem like they’re off
I love it! Looking forward to seeing the Fairmont on the dyno and long smoky burnouts! Who wants ice cream and burn outs😊
Wow. Thats impressive it went together so quickly
Putting a LED strip on the garage door behind you will help a ton. It’s one of those things you plug in when you need it
Be sure to install vertically.
I have thought of that many times might do it on the that side as I open that door a lot and that way it would always be there and not blocked
The sound of it reminds me of my old Vortech V-1 S-trim blower on my foxes, the good old days
You had me at Goodbye Horses lol.
Read about this on the website, little surprised by what they advertise for WHP gains. Curious to see results.
I put like 20 - 4’ leds in my garage. It’s offensive to look at when your outside the garage but amazing when you are inside the garage.
Just put one on my 2008 Sierra and it was also oddly fast how it all went together. Great quality stuff too.
well engineered! nice to hear its the same on the truck kit
Awesome! This gunna be good.
That k-series sitting in the background makes me feel a type of way.
Love the blower air intake location, helps to get that compressed air even more hot and toasty!
im not sure you understand how hot a blower actually makes air lol
@@SloppyMechanics Been running blowers since 1980!!!
Thanks
The Mott content we don’t deserve…. What are the expectations non IC? An extra 100 seems fair on the baby soft pulley.
Sick!
More overhead light helps so much with seeing under the car as well.
I have to wonder how the performance of this compared to an LSA is
Lsa would have a higher horsepower potential. They move way more air.
We’ll find out
Let's go!!!!!! Spinny Boi time
Which kit do you think would be best for a LS Colorado
I don't care what anyone says... From this point forward, I will refer to this combo as _Stormnado._ 😁
...and I dare say you are now Buffalo Blower. 🤣I wonder how much of your audience has absolutely no idea what you were doing there. 😂
Self contained oil?
Yes
If you put up some white drywall it'll get even brighter
And...now my 3/4Tn GMC is asking for one of these. 😮
i need your advice sloppy have a x max 4l80e rebuild i dont have 3rd and 4th computer want shift it terminator x max is the weapon of choice
Nice Fairmont..
I’m rebuilding a 6.0 right now. About to put the pistons back in but wonder if I need to gape the rings for this setup?
Powerfisting AND The Crying Game reference.. what have you been watching?
Seriously though, how bloody simple and awesome in that install? What else do you need to do (apart from charge piping) is it injectors and an tune?
*Silence of the Lambs. You're thinking of a different '80s song. 😂
@@TheBrokenLife Ohhh right you are... Buffalo Bill "would you *** me?"
@@DaveHiggoHiggins _It puts the Joe Dirt in the hole._ 😆
This “G8” kit……. How much boost is that head good for?
Affordable easy mode boost. Shoulda just got the small pulley, I guess your going to show the step up change in power 🙏🥺😁. Rofl at the loctite seg. A partition between that inlet opening and the long tubes or 90 into the fender well (foxbody vortech elbo) would help a lot on charge temps.
I have all the pulleys I explain that
@@SloppyMechanics I missed it, I heard about the void the warranty thing. I wasn’t saying like ya did something wrong 😜 I’m just thinking ya know your gonna end up with the smallest.
hahaa the lock tite sequence!
was that a silence of the lambs reference???
Yessir
That fucking music shot was great.
Hey Matt i am curious what you do, i have a lq9 and was wondering if you use a oil cooler or do you just block it off on the oil pan?
That feeling when you spy Driven Racing oil in a legends garage!
what is driven racing oil?
@@SloppyMechanics ua-cam.com/video/MbEYgnzpdAk/v-deo.html the LS30 box on your floor
Matt- what alternator mount/bracket/idler setup is that?
Doing a CAI for it?
Footage looks great on this one Matt! Did you make any camera gear changes recently besides the extra lights in the shop?
Jaimie bought me a Sony camera to shoot nicer video I use it when I can it’s very sharp
@@SloppyMechanicswhat sony model camera is it. Video quality and sound are both great.
Nothing like having good work lights… save the safety squints for the grinder
Matt, when you finish with this, would you consider passing it along to me and ill swap it onto my 81 crewcab Fairmont with a HCI 6.0/t56/4.30 gears/minitubbed with 315's...Im also using Corvette spacing and electric power steering... there is plenty of room over there. Im using Holley Terminator X and mine is a daily driver street car.
Any info on how you did your electric power steeering?
If he's going to give it away he said he'd give it to me first, sorry 😆
@@mikefew4232 I had a well written reply, but it seems UA-cam decided that it didn't want to let you see it. Do you have an email? I'll shoot a video for ya and explain everything I did.
i have a silverado it will most likely fall into
Instant boost boiii
lmfao @ the loc-tite clip
What cam & exhaust you running?
Can we expect to see some non intercooled e85 dyno results?
Yes. He talked about it in last video.
I would like too but I don’t wanna do intercooler piping too many times in a row I’ll see what I can do
@@SloppyMechanics do the pipes for an intercooler and just replace the intercooler with a straight pipe to start with? Would be really nice to compare
Could you turn the supercharger outlet to be above the bracket or would it hit the hood?
yep we will work something out, believe youuuu meeee
What intake manifold is that? I have an lm7 and cant find anything for under $500 bucks!
stock NNBS intake
Why dont you turn the housing faceing up?
The outlet?
They “GAVE” you the SC kit?
Yessir
Was waiting for some lipstick on the mouth of the blower 😄
Fk. Missed opportunity
...and tucking the belt behind the pulley. 😆
Nice!!!
Torknado
Is this an LS3? What cam?
Sloppy Tax on Torque Storm now…lol
when are you going to put the dual blower setup on it hahaha
Probably not this guy as I’m adding turbo to it
@@SloppyMechanics fireeeee..twin charging has always intrigued me.
Matt- did you sell this kit?
If it were only a grand cheaper it would truly be sloppy. About 3500, correct?
Rotate the outlet to the top ! One u bent and your money
Do a burnout matt whats the dealio
fuck, Now I want to see a rwd k series powered fairmont
Is that bad bearing sound from the blower? Made me cringe. Hopefully it will tone down some after break-in.
straight cut gear box whine 100% normal and if it doesnt sound like that is broken lol
What year Corvette balancer is that??
Hmmm, ls1 iirc I have two used ones,
Thank you. Not to that point yet, still working on naturally aspirated but I'm paying attention to this. Thank you for the response
😊
Twerk Storm? Oops sorry wrong site
Can’t wait to see
Put one on my 06 silverdo easy install it been very reliable
How many cups of coffee did you have during the install? You are talking and moving at like 145 bpm.
None actually I didn’t eat or drink water for hours prior to installing lol
It puts the loctite on its threads.
Buffalo Bill reference haha
Lock tight that lens cap. (:
Goodbye horses.
I take it you know who Jay and Silent Bob are 😂
put twin storms on it
We talked about it, it’s a possibility
👍🏼💪🏼
You think these would fit on a c6? lol
Give them a call
I'm 50 now,. No such thing as too much light...
Hope u don't route it through the belt, just to make changing it easier
The only thing that would make it better is if it had a twin on the other side of the engine 👍 That would be awesome
We talked about it
@@SloppyMechanics that would be awesome I’d love to see that
No, but a K series in a fairmont does sound like a good idea :-)
Matt, you could just run methanol and forget needing an intercooler and dual fuel it like everything else.
I could also do nitro and just rip motor once a day lol
Put a manual transmission in it so you can call it stormy manuels.
But you're saying hello horses, not goodbye horses
8 ribbed for her pleasure...