Right now, I can install the accent lighting on the bumper by any chance did you see if there was plug-ins for the accent lighting that goes in the front bumper a.k.a. fog lights
Installing some bumper plugs because the dealerahip drilled holes in the bumper. You have to drill a 3/4" deep hole for the length of the plug, will the bit hit anything at that length on the backside behind the bumber? Please help it's greatly appreciated!
Off the the far sides the reinforcement is closer to the bumper more towards the center you will hit the absorber foam. No wiring to worry about where your drilling
Yes I’ve done it before just hard to get to the screws. If your doing that to not recalibrate most of the time just unhook the battery while your working on it and it’s unplugged.
I own a 2025 camry SE. bumper got scratched underneath. Replacing the bumper. Is recalibaration necessary when the bumper is replaced and will the body shop know to do that? Not sure the cons of replacing the bumper.
If you’re going to a Toyota body shop they’ll know what to do. If the battery is disconnected while it’s unplugged you’re usually fine. Sometimes you’re fine with it being done even if it’s not unplugged but that’s rolling the dice. There’s ways to remove the bumper without unplugging it to. Most shops that work on newer cars know all that needs to be done. All these cars now need so much extra care because of the electrical components
i really wish you would have shown the process of taking this screw out 1:03 it is missing on my 2025 and i need to find replacement not sure if it has a u clip in there or not finding the right screw and clip has been a nightmare
The black accent on the left side of the bumper on my Camry got chipped and I found a replacement for it but not entirely sure how to remove it. Haven’t been able to find a video on it. Anyway you could release a short video showing that?
Question: Is the bumper on the Camry one single piece (the bottom portion and the upper portion where the emblem sits), or is the bumper 2 individual pieces (the lower and upper) that are joined together?
I have about 700 miles on my 2025 Camry se AWD. Deer ran out this morning and now I need a new bumper, left accent light, and driver headlight assembly… Already found a headlight for $635. Can’t find a painted Underground bumper and the dealer can’t even find the accent light assembly.
Way easier than I thought, THANKS, Going to add running lights
That should look good
You have a video on that?... Hahaha Front accents, right? Did you get the 2024s or AM via Amazon?
What accent lights did you buy? A deer broke my oem ones this morning…..
Right now, I can install the accent lighting on the bumper by any chance did you see if there was plug-ins for the accent lighting that goes in the front bumper a.k.a. fog lights
Installing some bumper plugs because the dealerahip drilled holes in the bumper.
You have to drill a 3/4" deep hole for the length of the plug, will the bit hit anything at that length on the backside behind the bumber?
Please help it's greatly appreciated!
Off the the far sides the reinforcement is closer to the bumper more towards the center you will hit the absorber foam.
No wiring to worry about where your drilling
@mcars461 thank you so much!
Is it possible to remove the grille between the headlights WITHOUT unplugging any wires?
Yes I’ve done it before just hard to get to the screws. If your doing that to not recalibrate most of the time just unhook the battery while your working on it and it’s unplugged.
@@mmotorcycles9497 just to clarify, you’re saying to unhook the battery FIRST then unplug the radar/sensors to avoid recalibrating?
Can you show hoe to remove it from a Crown xle 2024?
When one comes in I definitely will.
I own a 2025 camry SE. bumper got scratched underneath. Replacing the bumper. Is recalibaration necessary when the bumper is replaced and will the body shop know to do that? Not sure the cons of replacing the bumper.
If you’re going to a Toyota body shop they’ll know what to do. If the battery is disconnected while it’s unplugged you’re usually fine. Sometimes you’re fine with it being done even if it’s not unplugged but that’s rolling the dice. There’s ways to remove the bumper without unplugging it to. Most shops that work on newer cars know all that needs to be done. All these cars now need so much extra care because of the electrical components
Does the new gen bumper fit on the last generation? Or are there new mounting points? Looks similar besides headlights…
Fenders are different it doesn’t line up perfectly
Hey, should i disconnect my battery if im disconnecting the plugs to remove the bumper and adding DRL lights on my SE?
Yes disconnect the battery. It will keep you from having to recalibrate.
@@mcars461thank you so much for the reply 🙏🙏
i really wish you would have shown the process of taking this screw out 1:03 it is missing on my 2025 and i need to find replacement not sure if it has a u clip in there or not finding the right screw and clip has been a nightmare
There’s a plastic clip that goes in the bumper. Square holes along the bottom. All clips on bottom are the same then a self sinking 10mm head bolt
How easy is it to remove the front grill out from the bunper?
It’s real easy but the bumper is really flimsy with it out
@mcars461 can you without removig the bumper?
Front accent light kit plug and play?
I believe it is
The black accent on the left side of the bumper on my Camry got chipped and I found a replacement for it but not entirely sure how to remove it. Haven’t been able to find a video on it. Anyway you could release a short video showing that?
With the bumper off there’s clips on the backside holding it on
Question: Is the bumper on the Camry one single piece (the bottom portion and the upper portion where the emblem sits), or is the bumper 2 individual pieces (the lower and upper) that are joined together?
If I remember right it’s one piece unlike the previous year
I have about 700 miles on my 2025 Camry se AWD.
Deer ran out this morning and now I need a new bumper, left accent light, and driver headlight assembly…
Already found a headlight for $635.
Can’t find a painted Underground bumper and the dealer can’t even find the accent light assembly.
This one didn’t have any lights it was just a cover where they would go. Sorry about the accident that’s a real bummer
@ thanks. Looks like I have to order a new bumper from Toyota and get it painted locally.
Thanks so much, I hate how plastic like the grill looks so I am going to "metal it up."
Nice.
Why did you have to take the bumper off? Did something fail?
It was damaged I had to replace it
Can you do another for the spoiler removal
The rear trunk spoiler?
My bad, wrong text. Can you find any cold air intake part for this car or tutorial for it
would you be willing to sell that front bumper/grill?
Sorry it’s long gone.
Is that an SE or XSE? If it's an SE are the plugs there for bumper trim lights that the XSE have?
I’m not sure Toyota usually has the same harness. I think I’ll be taking one off next week
@@mcars461 What version is the camry video SE or XSE?
Thank you Sir
hey, can you make video how to remove the dash please? thank you!!
Only doing bodywork not planning a dash out anytime soon. Thank you for the comment
@@mcars461subscribed! In case doing it in the future. Thank you again! 🙏
Your the best thank you
Thank you!
You're welcome!
Thanks !
No problem hope it helped
Are you going to replace that ugly front with some other bumper? I love the car but wish the front looked different
lol unfortunately no replace with same one.
front looks amazing the old camrys look like shit
Thanks!
You are welcome