How to Replace Front Wheel Hub and Bearing Assembly 2007-2013 Acura MDX

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ic/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2007-2013 Acura MDX. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaYR/1A...
• Phillips Head Screwdriver 1aau.to/oaYR/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/oHu/1AX...
• 17mm Wrench 1aau.to/oKe/1AX...
• 17mm Socket 1aau.to/oaZj/1A...
• 19mm Socket 1aau.to/oZe/1AX...
• 22mm Socket 1aau.to/okk/1AX...
• 36mm Socket 1aau.to/obm/1AA...
• Air Blow Gun
• Air Compressor
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/o3/1AXA...
• Brake Caliper Hanger 1aau.to/ogb/1AX...
• Locking Pliers 1aau.to/oig/1AX...
• Pliers
• Air Chisel 1aau.to/oaQ/1AX...
• 1/2 Inch Breaker Bar 1aau.to/opo/1AX...
• Ratchet 1aau.to/obdk/1A...
• Socket Driver
• Socket Extensions 1aau.to/oaZj/1A...
• Swivel
• Torque Wrench 1aau.to/oajk/1A...
• Brake Grease
• Brake Parts Cleaner
• Gloves 1aau.to/owv/1AX...
• Rust Penetrant
• Surface Prep Discs 1aau.to/oh/1AXS...
• Hammer 1aau.to/oKq/1AX...
• Sledge Hammer 1aau.to/oKq/1AX...
• Wire Brush 1aau.to/opv/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jimmcconville624]

good video but noticed a few things:
- i wouldnt spray brake cleaner in the ribber boots on the bracket. brake clean will dry out that rubber
- didnt use the springs for the pads
- didnt grease the back of the pads
- didnt open the brake fluid cap when compressing the caliper pistons
rest of it looked pretty good.

[@OGMass]

Thanx... I'm about to replace one. Keep y'all posted

[@danishh3819]

Great job Sir ❤

[@JR-ze5ss]

The best tutorial

[@harris977]

Thanks!

[@NavySWO]

How do you know when these are shot? My ‘09 MDX is making a humming/droning sound, especially during turns.

[@michaellopez4018]

2013 Acura ilx does not have any bolts holding the hub assembly in.
Is the hub just pressed into the bearing?

[@trentmorrison6074]

What about a 02? That what I have.

[@jimmcconville624]

any reason you didnt apply never seize to the bolts on the caliper, bracket, and back of the hub?

[@armondhammer9]

why not anti seize the pins while you're at it