GAME BOY Color Capacitor Replacement and Speaker R&R!!
Вставка
- Опубліковано 22 лип 2023
- Watch as Wolfman struggles to replace capacitors and speaker on this Game Boy Color!
Capacitors:
console5.com/store/game-boy-c...
Low Melt Solder:
amzn.to/3Ubv94g
Amazon Affiliate Links
Follow Wolfman On Facebook:
/ wolfmanrepairs
Follow Wolfman On Instagram:
/ wolfmanrepairs
Thanks For Watching!! Please like and subscribe!
Tools and Supplies I use:
Amazon Affiliate Links
Tools:
Blue Matt: amzn.to/3Gj3dWz
Solder Iron: amzn.to/3nDZhcg
Ifixit bit set: amzn.to/3ZKRiro
Microscope: amzn.to/40InzRb
Hot Air Station: amzn.to/3nPX913
Capacitor Discharge Tool: amzn.to/3Gfyv0k
Wire Stripper: amzn.to/3zBlnPi
Solder Sucker: amzn.to/3ZLS9YN
UV Light: amzn.to/3nPcBe3
Philips Head Set: amzn.to/41lejCz
Fiberglass Pens: amzn.to/3zwhQSq
Micro Cutters: amzn.to/3MjrGyB
Supplies:
Solder: amzn.to/3UdWra0
Fulx: amzn.to/3MfCI7Z
IPA: amzn.to/3GeT5xJ
Solder Wick: amzn.to/3MjlV3T
Low Melt Solder: amzn.to/3Ubv94g
Solder Mask: amzn.to/3Kg2arD
Wire: amzn.to/43bcolJ
Contact Cleaner: amzn.to/3UjcVOj
Amazon Affiliate Links
Music
Epic Trailer by LesFM | lesfm.net/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...
Cinematic Epic Emotional | EGLAIR by Alex-Productions | onsound.eu/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...
Perfection by MaxKoMusic | maxkomusic.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...
Inspiration by MaxKoMusic | maxkomusic.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...
Beauty by MaxKoMusic | maxkomusic.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...
Video is for entertainment purposes only. Not responsible if you break stuff or have Wolves in your living room... - Ігри
Thanks for the tutorial, I tried to replace new C32 on my GBC and it improves the static speaker noise issue.
Glad you found my video helpful!! 🐺😁
Wow ! Another great video.
Thank you glad you enjoyed the video!! 🐺😁
Nice job !
Thank you!! Glad you enjoyed the video!! 🐺😁
Keeo the good work :)
Thank you!! 🐺😁
Great video, but always use flux even for desoldering. The reason why, towards the end, you had spatter, and you didn't use any flux plus the low melt. If you had touched the spatter with flux, all of it would have gone straight to the iron. Sometimes, Wick alone isn't enough, so flux it up! Also when soldering surface mount caps only tin one side like that it doesn't give you much trouble to flatten it out. More flux is better than no flux!
Thank you!! Yes I agree I need to use more flux!! The one I’m currently using has been giving me issues the flux is getting past the plunger in the dispenser and it’s making a mess. Do you have a flux you recommend?
Recently I’ve been dipping my solder wick into flux before use and it’s just amazing how well it wicks solder now!!
I need a bit of practice on the surface mounted capacitors. I think this was my first time soldering them. 🐺🐺😁😁
@wolfmanrepairs I definitely do, buddy! Stirri fluxes, I've got a code for you for a 10% off! (PARADOXHD) The ASM seems to be a common favorite, but the V3 is a new formula that's very good, performs awesome, and also smells nice. I've actually recently purchased that same one you did, and other various from that brand did not like it one bit. After using stirri, I never looked back. Give it a try and tell me how you like it. Pro tip for cleaning: Use cleanroom wipes if you can. They are lint free and swabs. Get as much off as you can before using the IPA, and it should eliminate sticky mess.
@@wolfmanrepairs @wolfmanrepairs I definitely do, buddy! Stirri fluxes, I've got a discount code for you for a 10% off! PARADOXHD
The ASM seems to be a common favorite, but the V3 is a new formula that's very good, performs awesome, and also smells nice. I've actually recently purchased that same one you did and did not like it one bit. After using stirri, I never looked back.
@wolfmanrepairs yes check out the V3 from Stirri it's my current favorite. If you got a form of contact, I can message you for a discount.
@wolfmanrepairs pro tip for cleaning use clean room wipes and swabs they are lint free and really great to clean up flux. I use that first to get as much as I can off then I use IPA the highest percentage you can get I usually stick to 99% but 90 or higher is the best. This gets rid of any sticky residues especially if you clean it right away while the flux is hot
Interesting. Most NA presenters, as yourself, call soLder, "sodder".... however that doesn't detract from a good demonstration...
I agree!! It’s kinda nice to be able to see videos from all over the world from people who speak English but have different pronunciation for things or have quirky sayings for things!! 🐺🐺😁😁
Great video. What temperature are you using on your soldering iron?
Thank you!! My soldering iron is set to 290c or 554f 🐺😁
@@wolfmanrepairs i think its supposed to be 400-450 for unleaded solder iirc
Ah ok!! Thank you!! I will have to look into it!! 🐺😁
Great work!, i would check continuity on the Sound scroller thingy and the headphone jack because those have messed up sound for me on some repairs on these.
Thank you!! Yeah I’m not sure if the sound volume is normal or not. I will have to give that a try, the sound scroller wheel thingy could be dirty.
Thank you for the suggestion and comment!! I really appreciate it!! 🐺😁
Yes try cleaning the volume potentiometer with contact cleaner. Get to the contacts under the plastic wheel. Speakers can be checked for ohm measurement between the terminals with a multimeter.
Thank you both!! I went ahead and sprayed some contact cleaner into the sound wheel contacts and the volume seems to be much better!! 🐺😁
@@wolfmanrepairs glad to be of assistance! Keep the great videos coming!
I traded in my GBC because the buttons wore out like an idiot and then bought a used GBC figuring I could mod it. I tried it out and it kept resetting and ruining save files. Turns out it was a bad capacitor. The volume is a bit low, but i can replace it with a better speaker down the road. I still need to give it a rechargable battery and a backlit screen.
That’s an interesting issue!! I had no idea a bad capacitor could do that!! I will have to keep that in mind. For this GBC I did modify it a bit. If you would like you could check it out here:
Funny Playing GAMEBOY Color IPS Screen Install!!
ua-cam.com/video/c-s_h-LC68E/v-deo.html
🐺😁
Use a bigger tip to get more heat on the pad. No need for low melt!!
Thanks for the advice!! I will have to try that next time!! 🐺😁
thumb up👍
Thank you!! 🐺😁
Uhhhh, you really shouldn’t be soldering anything while the pcb is still inside the shell.
Yeah,I totally learnt my lesson on this one!! Thankfully you can’t see it when the shell is closed.
Thanks for commenting🐺😁