Amazing 380 amps! TIG welding for mass production manufacturing process
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
Вставка
- Опубліковано 27 січ 2024
- For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
Although not common, sometimes high currents are required in TIG welding.
When welding thick metal...
Or even when a lot of filling is required, high currents are used.
Today, I will introduce a simple example of how to melt a lot of filler wire with high current in order to fill it a lot.
Of course, there are advantages and disadvantages to it. There are also various situations where it applies.
In the future, we will introduce various situations where high currents are used.
Thank you for watching and have a great week.
#fast
#TIG
#welding
#test
#factory
#machine
#steel
#crafts
#Tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#pipe
#HAGOJIBI
#video
#weldingmachine
#TIGwelder
여러분 안녕하세요.
흔하지는 않지만, 가끔 TIG용접에서 높은 전류가 필요할때가 있습니다.
두꺼운 금속을 용접할때...
또는 많이 채워야 할때에도 높은 전류가 사용됩니다.
오늘은 많이 채우기위해서 높은 전류로 많은 필러와이어를 녹이는 방법을 간단한 예시로 소개시켜드립니다.
물론 그에 따른 장점과 단점도 있구요. 적용되는 다양한 상황들도 있습니다.
차후에는 높은 전류가 사용되는 다양한 상황들도 소개시켜드리도록 하겠습니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.
용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓
korea@nswel.com
내쇼날시스템 대표전화
051-941-9701~2
If you’re mass producing, and all you’re welding is steel, maybe mig might be the way to go.
That looks like 3/8" inch plate, would be better with mag instead of mig. Metal Active Gas aka spray arc transfer, needs different gas and more voltage and wire speed than MiG, but produces nice looking welds with no spatter and works great in flat position. The downsides is you can't spray out of position, (vertical up, or overhead etc), unless use an expensive pulse MiG machine.
@@brnmcc01 actually worked for a company doing this, with the pulse equipment. We were trying to perfect open root single bevels with an uphill progression. When everything comes together it works really well, but a lot of stars has to align.
That feeling when your tool costs more to run than hiring a worker.
Hiring a loser always cost you more.
I would love to see an etched cross section of that weld, may look nice on the outside but I doubt it is sound on the inside
It'll be fine, i've used 2 filler wires exactly like that for piping that passed xray. No worries, only some wps don't allow multiple filler wires at once.
My thoughts too. I know that if I had done something like that in my welding school, I would have been scolded. Big time. It´s not only about two filler wires, it is also about the temperature. But ok, it might work - I´d definitely choose MIG or MAG for doing this thick steel (but the TIG seams looks really nice, it is welding porn).
@@jokervienna6433 you obviously just need more amps for running multiple filler wires, just like when using a single thicker filler wire. The advantage of multiple wires, are that you can flow it better in a much wider puddle, where a single thick wire will tend to bulge in the middle.
@@z1teq of course, I totally agree. At the same time, we do have different welding methods for solving specific problems, right? TIG is not what I would use for this thickness, but ok - if it is the only method available, then this is really good to know.
@@jokervienna6433 True, but stainless steam piping gets this thick, and is often required to be welded with TIG.
For this specific joint, wire fed is obviously a better suited process.
잘보고갑니다 혹시 알미늄티그는 어떤건지 궁금합니다
Ok, fantástico maestro,buenas demostraciónes, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecido like desde Narón (Galicia)👍🤓😜
.EXCELENTE VIDEO¡¡... Y MUY FACIL DE ENTENDER¡¡...SALUDOS DESDE MEXICO¡¡
so satisfying to watch, it's beautiful.
Wow! Fantastic job.
Super
Merci
Are you getting penitration into the metals your welding ?
Thanks brhoter tutorial
vvery nice, and beautifully explained without a word.
Beautiful work, I aspire to be this good of a welder someday
All the pointing to the individual components and where they go made me start to think I clicked on a ad for a Chineese laser welder.
LOVE that welder…made in Korea too. NICE
power is nothing without control.
@@heyguys1685 in the land of the blind
the one eyed man is king.
@@tomthompson7400 in an ass kicking contest the one legged man is very busy.
Thought, thought he farted, but he shit himself.
I thought they were jost goung to lay all the rods in the joint and melt them all in one pass.
Exactly my expectation 😅
Awesomely bro 👍🖐
잘 된 용접보면
웰딩가즘을 느낌니다
Wow!!
DET GÅR GÖTT
Welding Spec Sheet callout?
I'd get sacked for taking that long to weld a mild steel open corner that probably could have been bent with a hammer
양 마무리는?
용접 초보입니다 이런 훌치기?용접시에 손이 많이 떨리는데 어떻게해야 보완할수있을까요
То что трясутся руки не особенно влияет на качество сварочных швов. Я смотрел одного сварного, у него тоже трясутся руки, но всё отлично получается и даже учит других. У меня тоже небольшой тремор есть периодически... Используйте что-то рядом, как подставку для рук. Мне помогает! Желаю удачи!
Être détendu lors du soudage . Il arrive parfois qu au début , on ait une mauvaise posture . Se caler aide aussi . Quand au bras qui s' occupe de la torche , regarde comment fonctionne un bras de robot pour les soudures automatisées , tout est dans le poignet , le reste étant stable ( épaule et coude ) . Faire le mouvement sans courant , pour s habituer au geste .
@@user-fn9xr9yo8g손이 공중에 떠서 지지할곳이 없는경우에는 어떻게 해야할지 궁금합니다😢
@@user-we9cn5ql4yищите опору заранее пройдитесь соплом по будущему шву и подумайте куда вам положить руку, чтобы было удобно!
Thank you. MASTER.
Weld looks great but sincerely doubt there is much penetration or strenth to this weld
no etched cross section ......... looks nice on the outside but thats not really the point
Look, I love having an excuse to TIG weld... but this just doesn't seem to be the solution to any problem. Perfect place for dual shield...
Good day Sir.i want to study and learn more about Tig welding i am here in south korea do you know where can i study?
buy a cheap 3 in 1 Mig, stick, Tig machine - (High frequency start) and start. most welding school is hands on- so get your hands on one and get to work. It dont have to be an expensive name brand. cheap chinese tig good enough- Aluminum / steel tig requires ac a machine that has both ac/dc around 500$usd. Dc only for steel $150usd. Lanthinated tungston $15-20$, Bottle and 100% Argon gas > $300 for tank and gas is around $30 depend on size of tank. GET A 3 IN ONE THOUGH- So you can experiment with all when the money comes around to buy electrodes and mig wire.
Очередная чепуха, всмысле чудо технология )
Он бы корень на 380 ампер варил я бы аплодировал
Почему до конца детали не проварено ?
На таком токе он не сможет сожгет
물은 위에서 아래로 흐른다.
단 용접물은 밑에서 위로 올릴수 있다
요즘 알림이 안떠서 업로드 안하시나 했는데 꾸준히 하셨네요?
유투브가 요즘 개판인가? 왜 업로드 알림이 안뜨지?
Wouldn't it be cheaper to flex seal it?
Stainless would bend 270°
Way too wide for code, cheers 🥂
Why would you ever tig a gap that large? Mig is the way to go with that.
A part la passe de fond, la pénétration, c'est complètement irrationnel de faire des remplissages comme cela au TIG, pertes de temps et donc d'argent mais aussi augmentation de la ZAT , c'est à faire au MIG ou en MMA
I was thinking there was little penetration as well.
Let's see you do it on a 6" Pipe.😅
What passes for content these days....
Аuthor is a great master
Schweissen kann er,mit dem Reden hat er es nicht so.😬
How about quality check? Any video of it?😂😂😂
A bit bodgy. Good enough for low grade steels and simple requirements. But the weld would be stronger if it was made with multiple stringer beads
Yeah, but that wouldn'd get even half of YT hits that this one does... ;-)
Just melting
Very poor , the migration at the HEZ would be huge
Looks lovely but strength not so great
이 정도면 그냥 co2 쓰는 게
+ сильнее прогревать металл.
Круто!!!
ChatGPT can do it better and faster.
무언극하심? ㅋㅋㅋㅋㅋ
It’s an add for the welder non of this demonstration would hold up in RL.
Lo bueno que tiene UA-cam es poder ver máquinas y herramientas que en tu put@ vida tendrás 😒
This makes no sense at all. Why are you using TIG when MIG would be 5 times quicker?
This is a tig channel.
너는 초보다
상황에 맞는 선택이 중요하지
좁은골목길에선 자동차보다 오토바이가 유리하기도하다
@@PeepPL it's not a job for tig welding
@CJB- Tig welding is the best to weld with. It makes the cleanest, strongest and highest quality weld why not use the best if your good at it
Notice How After The Weld The Paint Is Still There??? Doesn't Look Like Any HEAT Was Applied!!!
Still Looks Just Like It Did Before!!!
The music junked another video 👎👎👎👎👎💩💩💩💩😬
are you mexican? or will not pay you to speak?