Two Amazing Processes for Open Gap Edge TIG Welding
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
Вставка
- Опубліковано 16 гру 2023
- For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
Sometimes, edge welding also requires welding open roots.
When a gap is widened or complete penetration welding is required...
Today, we will introduce two methods for open gap edge welding.
In the future, we will introduce other information about edge welding.
Thank you for watching and have a great week.
#open
#edge
#root
#TIG
#welding
#test
#factory
#machine
#steel
#crafts
#Tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#pipe
#HAGOJIBI
#video
#weldingmachine
여러분 안녕하세요.
때로는 엣지 용접에서도 열린 뿌리를 용접해야 되는 경우가 있습니다.
갭이 벌어졌거나 또는 완벽한 침투용접이 필요할때...
오늘은 열린갭 엣지 용접을 위한 두가지 방법을 소개시켜 드립니다.
차후에는 엣지 용접에 대한 또다른 내용들도 소개시켜드리도록 하겠습니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.
사용된 알곤용접기
내쇼날시스템 300암페어 AC DC 알곤 용접기 AC DC NST 300FD
↓↓↓↓↓↓
네이버 쇼핑 bit.ly/39OiCRL
smartstore.naver.com/tigwelding/products/6842018935
용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓
korea@nswel.com
내쇼날시스템 대표전화
051-941-9701~2
Saludos de un Venezolano 🇻🇪 más en Perú 🇵🇪 😎
Hacen envíos de sus máquinas al extranjero? Gracias 👍🏻 😎💪🏻 🔥 🔥 🔥 🔥 🔥 🔥 🔥
키홀있게끔가는게 좋다는영상인가요?
키홀용접으 브롤, 백비드 융착이 고르지 못한것 같은 부분은 패스 한번이면 어느정도 잡히게 될까요?
Lay wire 방법이 와이어를 더욱 많이 넣는다는점, 키홀보다 용입이 조금 적을수 있다는점 말고 단점이 있을까요?
The difference in the two techniques is so small and that's why welding is such an art.
Thanks master!
Next time it would be great if place timer in the corner of screen for us to see speed difference between lay wire and key hole.
Everytime I watch these videos, I realize I suck at tig welding. You are a great welder.
Why
I,m from indonesia . I like yours video
Привет, очень круто!
Saludos desde Uruguay y gracias por la difusión
Ottimo lavoro tanti saluti dall'italia
Now do LAY WIRE
Merci pour la démo de soudage
Now wen i weld i have to jam this song or the bead dont come out right
Да практически ничем один от другого не отличается. На таком зазоре можно провести и без колебаний.
Usted es un maestro genial
EXCELENTE VIDEO¡¡... Y MUY FACIL DE ENTENDER¡¡...SALUDOS DESDE MEXICO¡¡
The laser is best for very thin sheet metal because you ad less heat that might cause the part to warp .outher type welds you get better results with the TIG
Merry Christmas mate to you and your family
Love your work, videos, and lessons. Thank you.
Question - do you listen to the bumper music in your videos while you work?
It seems to me to deliver a consistent weld, one needs to get into a rhythm or groove.
Good
สบายดี
Bardzo ładnie 😊👍 Sehr schön😊👍
This was interesting to watch. I always learn by seeing new techniques. (new to me, I meant to say). I am a new subscriber.
Is ti possible with a 0.6-0.8mm of thickness?
Bonjour M
Merci pour les vidéos fournies.j ai un question je cherche une réponse
Comment choisir l ampérage et les voltages suivants quoi ? Est ce qu il y a un règle a suivre et la question posé dans les autres procédés.merci
Top
T pee's are for practice welding not for a structural purpose. Yes for a square
fit up other arrangements need to be made along with proper sequence
What about finishing the job still some runs to do
what kind of handle is that?
Спасибо за исчерпывающий ответ
요즘 영상에 목소리가 안나오네요ㅠ
I have gas bottle which contains 5% CO2. Can I use this for tig welding?
Why would you?...... And yes it will weld but not as clean and nice as 100% argon. So if whatever your welding is not important than I guess you could , but again, why bother? Just go get a new bottle of Argon.
Чётко.
Что за присадку используете?
ER70S-6 (Weld T W4Si), смотрите видео на 4.10. Только диаметр не разглядеть, 2.4мм похоже.
@@Zavarshik Спасибо дружище
Excelente tutorial maestro, buenos trabajos como siempre, ese filtro de cámara es magnífico, se ve muy bien, gracias por compartir, FELICES FIESTAS yun merecido like desde Narón (Galicia)🔝👍🤓
You better have that clamped otherwise it will never be square
what makes you think it needs to be square in this video.
@@CorporationUM Because that's generally the case when things are welded at 90dgs to one another. lol You can't be serious.
@@77Avadon77
I’m sure he’s absolutely devastated and beside himself with despair that this rusted, throw-away scrap metal part for demonstration purpose only isn’t square, A$swipe.
@@77Avadon77. It’s just a demonstration of technique. It’s fine.
its already open after the root
Красиво. Но зачем ? Такие толстые железки в быту варить TIG не стал бы. Тут изогнутый толстый электрод пакистанского сварщика справился бы быстрее и дешевле.
Не расстраивайте меня
и мою больную душу!!..😂😂😂А вообще очень
красиво и залипательно.
He is gone sugar the hell out of the back of that root..
You have amazing hand control!
Немой?
😂😂😂😂😂 варить научился что ли
묵언수행중이신긴요?
👍👍👍👍👍👍👍👍👍👍👍👍👍👍🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥💓💓💓💓💓💓