Cheaper and Better? - Monsgeek M1W V3 Review, Teardown & Sound Test ASMR
Вставка
- Опубліковано 15 лип 2024
- Monsgeek has just released an update for their most popular keyboard, the M1W! Surprisingly, it's $25 cheaper than the previous model, with some added features. Check out our video to see the new features of the V3 and the differences between previous keyboards.
00:00 - Unboxing
00:24 - What's New?
00:58 - Package Contents
01:41 - Sound Test (Stock)
02:10 - Keycaps, Switches, Stabilizers
02:56 - Teardown
05:12 - Typing Test
05:41 - RGB Lighting
Featured Products:
Monsgeek M1W V3: www.monsgeek.com/product/m1w-...
Akko V3 Piano Pro Switch: en.akkogear.com/product/akko-...
Affiliate Links to help support the channel:
Amazon (US): amzn.to/4bPgVy5
AliExpress: s.click.aliexpress.com/e/_DFp...
Akko Gear: en.akkogear.com/?ref=64356
Monsgeek: www.monsgeek.com/?ref=LNUnboxing - Навчання та стиль
Thank you for going through the effort to make this video as beautifully as you have.
Thank you! I'm glad you enjoyed it!
Curious to know what you think about the removal of the accent piece? Which is probably the most significant difference between the M1W and the new M1 V3. Do you prefer the accent piece or the minimalist look?
Looks really plain and boring without the accent.
i actually prefer the no accent design. i ordered one today!
well I got this for like 2 weeks ago and I wet the whole board yesterday (hangover) and after a day I just assembled my whole m1wv3 and works still fine, do be careful tho there are excess lube on the pcb which can be taken off easily with alcohol. I love my board already since it sounds pretty clacky with the Gateron Milky Red Pros I got.
Glad it turned out fine! There was a bit of excess lube on mine as well which was probably from the stabs.
@@Late_Night_Unboxing oh yea I'd like to tell you the difference of mine vs yours, mine came with the purple stabs and did not include a coiled cable and a screw in stabs set which was a bummer coz I wanna try using it
I for one am sorry to see that Monsgeek did away with the side accents, that was one feature that made the past boards stand out a bit. I´m glad to see that the PCB doesn´t have flex cuts. I like to go foam-less in my alu boards for a more clacky sound profile.
Curious to see if they will be making the "v3 change" to other boards as well in the future.
@@Late_Night_Unboxing Do you mean the removal of the side accents? I would hate to see that happen, but they probably will to keep things consistent. Monsgeek had said that they were going to make the side accents available in other colors. Too bad they went back on their word and decided just to remove them. I think that now, it looks kinda boring to be honest.
@@The_Big_Giant_Space_Chiken I agree that they probably will remove the side accents for other keyboards. Side accents with other colors would be really cool though. Too bad it never happened.
What do you use the knob on the keyboard for? I've seen it on other keyboard but don't know what it's used for
By default, it toggles between RGB brightness and volume control.
why do i watch these videos? why is it so satisfying? I have my own for crying out loud and mine is creamier than half the ones on here lol.
At least it’s satisfying to watch. You can also appreciate what you like about your current boards. Until the next video… 😂
Lol when I look at the shop they still have the purple stabilizers. The only one I found with black stabs was the one on the Monsgeek US store. Everything in either Akko DE, EU or Monsgeek EU still has the purple ones despite it being literally the same model. Monsgeek M1 V3 QMK, VIA or M1W V3. Despite that making pretty much zero sense in the first place what would even be the differences? Also the spec sheet where you can look up the differences between the newer and older models obv only talks about the international version.
They have a comparison of all the M1 variants on their FAQ page.
Would you say the switch to spray coating is a dealbreaker? Considering getting an M1
For me, I’m fine with the spray coating. But in theory, anodizing should be a more durable finish if the keyboard gets banged around a lot.
Personally I much prefer the minimalistic look on the v3 compared to the m1 with side accents.
well the aluminum is die casted compared to the older versions which are cnc
@@thetrashman5258 their own website says it's still CNC so
@@thetrashman5258 According to Monsgeek, the V3s are CNC'd not cast. Just spray coated instead of andodized.
@@Late_Night_UnboxingThe chinese model is die cast btw and also lacks qmk via support unlike the international model.
Hey bro i just got this keeb, everything is good, but when i am on wire mode there is i believe a charging indicator with big red light at the spacebar is there like a way to disable that? Please
Hi. The charging indicator works independently to the RGBs and cannot be turned off. However, if you only plan to use it wired, you can unplug the battery and the charging light won't light up even when you're using it wired.
Or maybe you can cover the LED and put a piece of electrical tape on the PCB.
Was that a faulty green RGB?
The RGBs work alright. It might be the frame rate of the video, causing to look faulty.
oh mine came with the purple stabilizers?
Hmm, is yours the M1W with side accents?
you might have the chinese version. i have the cn version and it came with purple stabs
$80 ain't cheap
a few years ago for a thoccy keyboard like that the prices ranged from 150 to 300 bucks and most hot swappable keyboards for enthusiasts are above that price so it kinda is
It’s relatively budget friendly in the world of aluminum keyboards.