2007 F150 Brake Light Switch Replacement, Stop Light Fuses, Circuit Explained

Поділитися
Вставка
  • Опубліковано 14 січ 2020

КОМЕНТАРІ • 59

  • @mikenaples4046
    @mikenaples4046 3 роки тому +9

    Excellent, EXCELLENT video! Straight to the point. I had my brake lights troubleshot in about 10 minutes. Super helpful. Thanks!

  • @gonesmithin

    I never comment on videos but I have to say thank you! This helped me quickly fix the problem that had sidelined my truck for several days.

  • @gorillahumpr
    @gorillahumpr 3 роки тому +6

    Man. You are my hero. I can rebuild anything and understand it well. Electrical has always been my downfall. The connector clip was broken on the plug to the hazard switch and the plug slide out. The tutorial was perfect. Thanks a shit ton!

  • @mattr5706
    @mattr5706 Рік тому +3

    You’re my hero for the day. Bad switch replaced. Top light was coming on but not rears. Hazard switch lit them up. Did the jumper on the brake switch plug and they worked. Replace the switch ($55) and on my way. THANKS!

  • @colinrobinson
    @colinrobinson 2 роки тому +1

    Thank you!!! So many other videos explaining similar issues (signals, especially) always go straight for the relay under the steering wheel. I went to Ford, replaced that, and still had issues. After watching your video, I was able to check EVERY possible fuse, and found one blown, fixed my entire issue.

  • @asmaton64

    Thank you! Very helpful video with just the right enough information. Thanks for making so helpful and concise a video. Job is complete and the lights work now

  • @lovinglife3134
    @lovinglife3134 3 роки тому +9

    First video I checked on how to fix the light on my truck and right on the money... Tnk u bro🙏🙏

  • @HairyLoveHandles
    @HairyLoveHandles 4 роки тому +3

    You have helped me so much dude, I hope you get some more recognition off of this video and thankyou so much

  • @pandamx8959
    @pandamx8959 3 роки тому +1

    Helped me a ton and got my lights working again thanks bro

  • @gteeter2
    @gteeter2 2 роки тому

    thx best detailed video ive seen yet

  • @bobbyfranklin1124
    @bobbyfranklin1124 3 роки тому +1

    Thanks very much, you saved me a lot of money

  • @scottkillingsworth8566
    @scottkillingsworth8566 2 роки тому +1

    Fixed my problem, thanks for the information

  • @petefromhouston
    @petefromhouston 2 роки тому

    Great tutorial! Thanks for posting it

  • @robertpruett7570
    @robertpruett7570 3 роки тому +1

    My reverse lights work but I get nothing from my lights as far as brake or blinkers. Everything checks out good any ideas? Also what would be a reason my windshield wipers aren’t working

  • @VaultBoy1776
    @VaultBoy1776 2 роки тому

    Thanks man, this helped.

  • @glock316
    @glock316 28 днів тому

    Any idea for the reverse lights not working ? 2004 f150. I checked fuse 14 10 amp and it’s good. Looked into range Sensor but still unsure about replacing that part

  • @A.C.71

    On my 2005 f150, my 20 amp fuse you show keeps blowing, then I have no brake lights, turn signals, or hazard lights. My Bluetooth obd & forescan lite shows a possible short in the breaklight switch. If I pull the connector to it and jump those two wires and I get brake lights, does that mean for sure my switch had a short that was blowing my 20amp fuse?

  • @ooj686
    @ooj686 2 роки тому

    Could this fix the brake lights coming on by themselves? My battery died 2x in the past month and I'm pretty sure this is why. I just don't know what needs to be repaired to fix it.

  • @Dognme
    @Dognme Рік тому

    I have a 07 Lincoln mark lt - break lights work also my turn signals and my 4 ways, but my tail lights are not working - couldn’t find a fuse for them but I did look at a bunch and checked the relays all are good

  • @justtruth8310
    @justtruth8310 Рік тому

    Nice video Im having a STOP/brake light issue with only the left rear light. the right is fine. I replaced the left light itself and still have the problem. There is no power at the middle prong on the harness into the left new lamp/light when the brake is depressed but there is power across the 2 other leads. Strange. Any thoughts?