you all probably dont care at all but does someone know a tool to get back into an Instagram account..? I stupidly forgot the login password. I would appreciate any tips you can offer me.
1:15 test light / probe testing fuses on both sides. Key on so all fuses hve power 3:38 test light testing bulb socket. Put on battery-positive to test the ground 4:20 Test light on 3rd brake light socket using the probe and a pick 4:52 if one side works and the other doesnt, then check wires to where they connect together before they get to brake pedal 5:20 IF ALL LIGHTS aren't working, most common cause is brake-light switch. Use Jumper harness...???? 5:30 If the lights work using jumper harness, the Switch is bad.
Start with the bulbs. Then go to the rear connector. Then go to the wiring harness that feeds the rear connector. If you have power at the end of the harness the problem has to be either in the taillight harness or the bulb. This assumes that you have power to the 3rd brake light and your cruise works.
My brake light on top works. The lights on brake lights also works. They just don’t work when I press the brakes and my blinkers also don’t blink. What could it be
Really appreciate the knowledge here, yet I'm still without working brake lights on a 2005 Camry after going thru these steps. Bulbs, fuses and grounding wires are good, replaced brake switch as well. Got a Haynes repair manual for a 2001 camry- If I'm interpreting the wiring data sheets correctly, it looks like a " light failure sensor " connects between the brake stop switch and the tail and stoplight bulbs- tail lights are working though . My question is where is this sensor located and could part of it be defective for the brake lights and yet still allow the tail lights to function?
All Pro, thanks for your help , mine was a second fuse box under the dash I didn't know I had. you saved the rest of my day and maybe another to the repair shop.
Yes, I have a 2003 Tahoe, 4.8 2wd. Brake light trouble began when aftermarket taillights (LEDs) that came with vehicle went out; no turn, brake, or running lights. Changed back to OEM brake light assembly, changed out bulbs and removed the adapter that enabled the LEDs to work with OE light socket. After that turn signals and reverse light (white light) began to work, and the running/marker lamps work; still no brake lights though. Changed all possible fuses in dash block as well as fuse box in under hood. Still no brake lights. Found your video about brake light pedal switch, just changed that out, was difficult because I had an extra bracket in the way. Plugged in switch, retaining clip reinstalled, checked brake lights, still not working.....🤔🤔🤔. I'm at my wits end... Any further advice you can offer. Btw: the pedal is now very firm, vehicle does stop, and also the shift lever is now difficult to shift fro and back into Park... Please advise.... Thanks for your time...
I backed into a post and busted my left rear taillight lens out. I thought I could replace just the bottom lens but that wasn't the case. The whole assembly comes in one piece and, thanks to this webpage, I found out how simple it would be to replace it. I ordered the new assembly and when it arrived, it took all of 20 minutes to change. The part that took the longest was getting the wiring harness plugged in to the new one. It just didn't want to co-operate, but I was finally able to get it done and I saved a bunch of money doing it myself. Thanks for your help. This is a very cool webpage.
+Marlena Linne Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY
Thanks for video. First time writing on here. I own an old Toyota Matrix 2004, basic model. There's an issue with the rear brake light on the right. Left side is fine. Tried to change the bulb. it's not that. Pushing break pedal only lights the left side. I also noticed that when the engine is off, and I turn the headlights to high beams, the lights in the back also light up - and both sides. - all the lamps! I know, this sounds like a mistery. Any advice would be aprreciated. Thx.
Ha! I am currently having an issue with all of my lights on the back of my truck being out after installing a set of aftermarket taillights. I messed up and got the polarity wrong at first, once I figured that out I had no brake lights on the back of my truck. But you have pointed out fuses I have not checked and here I thought I checked all of them, I even replaced the brake light switch 🤦🏾♂️ going to the truck in the morning to check all fuses you pointed out in this video....BTW my truck is an 04 Suburban. Perfect YT timing with the video recommendation!!!👍🏾
I have a 1961 Pontiac star chief. It has 6 tail lights.( 3 on each Side) only 1 works on the right hand side.it works on brake and turn Signal.any advice? Thanks
Good man you just saved me from going into hyper mode with anger. I just bought 2 led brake lights and neither of them worked initially. I was fixing to tear my backseat apart to check fuses, then it hit me, flip the lights around. And just like magic they both worked. Thank you, thank you and thank you for the tips!
I've tried 3 bulbs for my passenger side brake light. Neither bulb worked. I tested the bulb socket with a multimeter. Having someone pressing the brakes I got needle movement with the OHM setting. No needle movement with the other settings. So there seems to be a current reaching the bulb socket. Is there something else I can try? The bulbs I tried are the ones given to me at the auto parts store for my car (08 Sentra).
One running light and brake light 2001 Chevrolet silverado 2500HD right side only yes I definitely checked all the wires but on my tester not getting it to show voltage when its grounded and touching wires one at a time yes the bulb is good but that relay on the fame I may disconnect every one and inspect th4 harnesses and install them when finished
I have a 05 crown Victoria police interceptor when a brake switch goes on this car it doesn’t come out of park but for some reason my brake lights don’t work but it goes into drive could this still b brake light switch?
+tmas Campo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
4:48 I don't understand that moment.Could you please explain me why you put pick on ground wire.I'd thought that the test lamp is enough for that.Normally if you touch the power wire with control lamp and if the other end is connected with the ground the light shoul be on.Maybe i have mistaken
My guess is since nothing is connected the car knows better than to send current through just one side and needs contact on both sides before being usable. The chips were already connected so no pick was necessary. Just a guess, a very late guess lol
My Leer cap is causing a short. My left brake light is dim compared to the right. I thought it was the bulb and replaced the bulb but it is not the bulb. It might be the connection from the third brake light, which is dead, and the connection from the third brake light on the Leer Cap is connected to the left brake light. So it makes sense that something is wrong with this connection. I am trying to see if there is a way of correcting the problem. I have reached out to Leer two times to see if I can order a new third brake light for the Truck Cap and their assistance is non-existent. Any advice would be helpful, thanks.
Do I have to disconnect the battery if I need to “get in to the terminals” with a pair of pliers? My connection is bad but I think the prongs are just pushed in.
My roommate was driving last week while I was passenger. and we came upon a red light a lot closer than we anticipated. and ended up hitting the brakes pretty hard and slid for a couple feet. immediately following this incident the left rear turn blinker light stopped working. when you turn the turn signal on it makes like a double-time sound, but the right blinker works fine and I think both front blinkers work fine basically the rear left turn signal stopped working after a sliding break. could there be some sort of easy fix?
Hello Sir, thanks for this video it is really informative. BTW, I would like to ask what causes a brake light bulb to short when it gets in contact with the vehicle body(which is normally grounded) and the brake light switch is not active(pedal is not depressed) but the key is on.. I would greatly appreciate your feedback.
+Mc Pel We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
+tee b Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Im trying to fix an 04 grand Cherokee the 3rd break light works fine but the other 2 don't work. Ive checked the bulbs and the fuses, and im at a loss.
Please help! 2007 jeep liberty. Third light works (when I press on break pedal) Nighttime, running rear lights work (same bulb as break light) No break light when pressing on break pedal (rear running lights will turn off) Break fuse is OK (#12, 15a)
+Israel E. Hernandez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
i have a 06 honda cr-v ex sports 4wd my right side brake light want work when my lights are on but when they are off all 3 my brake lights work can you tell me what to do i done replaced them to see if that work still nothing why the lights are on can you please help
I have one brake light working, one not, one tail light working and one not. Both in the back, I’ve changed the light bulbs and it’s not that. What should I do next?
On the 96 Tahoe brake lights are on but when you apply the brakes you get no brake lights. Checked fuses and replaced brake light switch and lights are on but when you brake no brake lights
+Ricardo Contreras We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
+Trials and Tribulations We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have a 2002 mercury grand marquis. I took down my visor on driver side. Cut a wire that was connected to it and Now im not gettin any power to my ac/heat panel. Nor is my clock workin. Please help!!
I have tail lights turn single work emergency flashers work but my high mouth on trunk don't work or my break lights won't work had blown fuse replaced it still no brake lights checked the bulbs when I tried to get them out then brake lights came on but then went back out I left high mouth light unplugged so why won't brake lights stay working
2011 Jeep Grand Cherokee Laredo 5.7L. Rear passenger tail light out. Hazards work, brake lights work... Fuses good...bulbs good....socket bad? Just poured out a quart of water from the housing.
My brake lights came on with the headlights but did not light up when braking. my traction control light was also on. I had a blown fuse.. replaced it with the spare in the fuse box and no more traction light and my brake lights working again. I hope I haven't been driving with no brake lights all this time
I have a 2006 Silverado and all lights work but when head lights are one the break lights don’t engage, I replaced the switch and checked all fuses but the only way I can get them to engage is by shutting off my running lights, could it be the switch that controls the auto lights and on and off? Im so lost
+Adrian Negron We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Can u guys please do a tutorial on a 2011 camaro tail light dysfunction. If u need some info on my issue I can provide that as well I can’t find no videos on this issue
Hello I have a 2006 Dodge Ram 1500, I have no lights on the right rear side of my truck. the turn signal, brake light and reverse lights work when turned on, but just turning the switch on there is no lights on the right side
Well my problem is this = my tail light wiring was cut and I cleaned up the wires and the lights turn on but when I put my foot on the brakes only the passenger and the top light will light up but not the driver side , what should I do ??
Good video. My issue: 2004 Jeep GC : Left brake light only lights up when headlights on but stays on bright. I think have 2 related issues: The first one was the brake switch fuse. I replaced that and it helped(previously no brake lights were working) I got rid of the OEM taillights for aftermarket version which look cool but the issue still stays. I'm thinking it's a grounding issue. Gonna try to work on it today. This video got me inspired to check again.
I'm working with a 2002 suburban, no brake lights. I'm trying to find the brake light switch, this is my first time being under the dash, I've owned it for 10-11 years without any issues. I've checked the bulbs and the cyclops and none are working.
+Bobby Tucker We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I need help I have a 2001 Pontiac grand am when I press on brakes my left tail light uses the left signal like if it was a brake light and when I release it the idle lights glow so it’s not the bulb and also not the circuit board I just bought it
+Delfino Trujillo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
2007 Caddy Escalade . . . Installed LED Tailight / Brake Turn Signal fixture it was working for many years . . . TODAY . . . NO Brake Lights . . . T. S. work fine . . . EmerG Flashers work fine
+EJ McClary We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What do you do if only your brake lights stay on? even if the vehicle is parked and off? The light switch and the front lights are off but both brake lights in the back stay on?
I have this problem where my rear right bulb stays on but does not blink when I activate the turn signal. Front right does blink though, it’s just the rear one. Can somebody advise ???
I checked every single fuse and switched them around, checked every solenoid and moved them around checked all bulbs, replaced the brake light switch. Still no brake lights. No 3rd brake light either.
+Sergio Flores We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Well I have a brake light issue all my other lights work my brake lights and the circuit board are all brand new I replaced the switch every relay I can find I put the fuse in and my brake lights stay on and but they won't go off until I pull the fuse out I don't know if it's a connection issue because I Arc something underneath the dash and it blew out my feet my fuse and I replaced the fuse now my lights to stay on and it's driving me nuts I'm going bananas I have a power probe when I'm short and open draw 3,000 I think it's called and on the when I have it plugged in it's saying I have a short on the right side and on the left side of the fuse it says it's open
My break lights work but when I turn the car on they turn on with out me touching the break and when I push the break they won’t do anything sorry my English is bad but I hope someone understands me 🥴
Why is it you ask about a specific yr make and model you guys always show a different yr or something not even lose to what you need to know ok w anout
+@christopherpalmer3468 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Can I run wite from side that work to the
Side that dont work
you all probably dont care at all but does someone know a tool to get back into an Instagram account..?
I stupidly forgot the login password. I would appreciate any tips you can offer me.
What if your two lower brake lights are out but the third is working?
1:15 test light / probe testing fuses on both sides. Key on so all fuses hve power
3:38 test light testing bulb socket. Put on battery-positive to test the ground
4:20 Test light on 3rd brake light socket using the probe and a pick
4:52 if one side works and the other doesnt, then check wires to where they connect together before they get to brake pedal
5:20 IF ALL LIGHTS aren't working, most common cause is brake-light switch. Use Jumper harness...???? 5:30
If the lights work using jumper harness, the Switch is bad.
Start with the bulbs. Then go to the rear connector. Then go to the wiring harness that feeds the rear connector. If you have power at the end of the harness the problem has to be either in the taillight harness or the bulb. This assumes that you have power to the 3rd brake light and your cruise works.
My brake light on top works. The lights on brake lights also works. They just don’t work when I press the brakes and my blinkers also don’t blink. What could it be
@@raelynnr2524 fuses
3 break light out bulbs are good checked fuses..??
Really appreciate the knowledge here, yet I'm still without working brake lights on a 2005 Camry after going thru these steps. Bulbs, fuses and grounding wires are good, replaced brake switch as well. Got a Haynes repair manual for a 2001 camry- If I'm interpreting the wiring data sheets correctly, it looks like a " light failure sensor " connects between the brake stop switch and the tail and stoplight bulbs- tail lights are working though . My question is where is this sensor located and could part of it be defective for the brake lights and yet still allow the tail lights to function?
All Pro, thanks for your help , mine was a second fuse box under the dash I didn't know I had. you saved the rest of my day and maybe another to the repair shop.
My 99 ranger is giving trouble with the brake lights…. I’ll follow the vid and report back ! Great info !
Thanks for speaking English and explaining things simply
Yes, I have a 2003 Tahoe, 4.8 2wd. Brake light trouble began when aftermarket taillights (LEDs) that came with vehicle went out; no turn, brake, or running lights. Changed back to OEM brake light assembly, changed out bulbs and removed the adapter that enabled the LEDs to work with OE light socket. After that turn signals and reverse light (white light) began to work, and the running/marker lamps work; still no brake lights though. Changed all possible fuses in dash block as well as fuse box in under hood. Still no brake lights. Found your video about brake light pedal switch, just changed that out, was difficult because I had an extra bracket in the way. Plugged in switch, retaining clip reinstalled, checked brake lights, still not working.....🤔🤔🤔. I'm at my wits end... Any further advice you can offer. Btw: the pedal is now very firm, vehicle does stop, and also the shift lever is now difficult to shift fro and back into Park... Please advise.... Thanks for your time...
I backed into a post and busted my left rear taillight lens out. I thought I could replace just the bottom lens but that wasn't the case. The whole assembly comes in one piece and, thanks to this webpage, I found out how simple it would be to replace it. I ordered the new assembly and when it arrived, it took all of 20 minutes to change. The part that took the longest was getting the wiring harness plugged in to the new one. It just didn't want to co-operate, but I was finally able to get it done and I saved a bunch of money doing it myself. Thanks for your help. This is a very cool webpage.
+Marlena Linne Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY
Thanks for video. First time writing on here. I own an old Toyota Matrix 2004, basic model. There's an issue with the rear brake light on the right. Left side is fine. Tried to change the bulb. it's not that. Pushing break pedal only lights the left side. I also noticed that when the engine is off, and I turn the headlights to high beams, the lights in the back also light up - and both sides. - all the lamps! I know, this sounds like a mistery. Any advice would be aprreciated. Thx.
Thanks the yellow and orange wire was right on the money!!
Ha! I am currently having an issue with all of my lights on the back of my truck being out after installing a set of aftermarket taillights. I messed up and got the polarity wrong at first, once I figured that out I had no brake lights on the back of my truck. But you have pointed out fuses I have not checked and here I thought I checked all of them, I even replaced the brake light switch 🤦🏾♂️ going to the truck in the morning to check all fuses you pointed out in this video....BTW my truck is an 04 Suburban. Perfect YT timing with the video recommendation!!!👍🏾
+DMD LTZ Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
So to test a bad ground wire I have to have a positive somewhere hooked up and touch the ground wire? Love your vids
I have a 1961 Pontiac star chief. It has 6 tail lights.( 3 on each Side) only 1 works on the right hand side.it works on brake and turn Signal.any advice? Thanks
Good man you just saved me from going into hyper mode with anger. I just bought 2 led brake lights and neither of them worked initially.
I was fixing to tear my backseat apart to check fuses, then it hit me, flip the lights around. And just like magic they both worked. Thank you, thank you and thank you for the tips!
Good content. Always learning something new. Keep up the great content guys.
+Nonchalont Thanks for checking us out! 1AAuto.com
I've tried 3 bulbs for my passenger side brake light. Neither bulb worked. I tested the bulb socket with a multimeter. Having someone pressing the brakes I got needle movement with the OHM setting. No needle movement with the other settings. So there seems to be a current reaching the bulb socket.
Is there something else I can try? The bulbs I tried are the ones given to me at the auto parts store for my car (08 Sentra).
What scanner is that?, is that a pretty good one?
One running light and brake light 2001 Chevrolet silverado 2500HD right side only yes I definitely checked all the wires but on my tester not getting it to show voltage when its grounded and touching wires one at a time yes the bulb is good but that relay on the fame I may disconnect every one and inspect th4 harnesses and install them when finished
Should I turn on the lights before I check the tail light fuses?
Short and very informative, thanks
I have a 05 crown Victoria police interceptor when a brake switch goes on this car it doesn’t come out of park but for some reason my brake lights don’t work but it goes into drive could this still b brake light switch?
+tmas Campo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Would love to see this for a 2016 Accord
4:48 I don't understand that moment.Could you please explain me why you put pick on ground wire.I'd thought that the test lamp is enough for that.Normally if you touch the power wire with control lamp and if the other end is connected with the ground the light shoul be on.Maybe i have mistaken
Same i didnt know what was the pick for. I thought he probe that for to turn it on but it wasnt a switch so idk
My guess is since nothing is connected the car knows better than to send current through just one side and needs contact on both sides before being usable. The chips were already connected so no pick was necessary. Just a guess, a very late guess lol
My Leer cap is causing a short. My left brake light is dim compared to the right. I thought it was the bulb and replaced the bulb but it is not the bulb. It might be the connection from the third brake light, which is dead, and the connection from the third brake light on the Leer Cap is connected to the left brake light. So it makes sense that something is wrong with this connection. I am trying to see if there is a way of correcting the problem. I have reached out to Leer two times to see if I can order a new third brake light for the Truck Cap and their assistance is non-existent. Any advice would be helpful, thanks.
The stop light and tail light are different fuses right?
Do I have to disconnect the battery if I need to “get in to the terminals” with a pair of pliers? My connection is bad but I think the prongs are just pushed in.
+6atlantis Thanks for watching! Disconnecting the battery is not a bad idea if you have to do that.
My roommate was driving last week while I was passenger. and we came upon a red light a lot closer than we anticipated. and ended up hitting the brakes pretty hard and slid for a couple feet. immediately following this incident the left rear turn blinker light stopped working. when you turn the turn signal on it makes like a double-time sound, but the right blinker works fine and I think both front blinkers work fine
basically the rear left turn signal stopped working after a sliding break. could there be some sort of easy fix?
Hello Sir, thanks for this video it is really informative. BTW, I would like to ask what causes a brake light bulb to short when it gets in contact with the vehicle body(which is normally grounded) and the brake light switch is not active(pedal is not depressed) but the key is on.. I would greatly appreciate your feedback.
+Mc Pel We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Very complete and through. Problem solved. Thanks a lot
You guys are lifesavers. Thanks again.
+tee b Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Im trying to fix an 04 grand Cherokee the 3rd break light works fine but the other 2 don't work. Ive checked the bulbs and the fuses, and im at a loss.
Please help!
2007 jeep liberty.
Third light works (when I press on break pedal)
Nighttime, running rear lights work (same bulb as break light)
No break light when pressing on break pedal (rear running lights will turn off)
Break fuse is OK (#12, 15a)
+Israel E. Hernandez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What about tag light also
i have a 06 honda cr-v ex sports 4wd my right side brake light want work when my lights are on but when they are off all 3 my brake lights work can you tell me what to do i done replaced them to see if that work still nothing why the lights are on can you please help
Question: are the vehicles you guys work on are your own personal, customers,etc?
Like your in depth to the point considered explanations 👍.There of great help on keeping car in top shape 🇬🇧 Greatings from Northern England
+Flicki Flak Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have one brake light working, one not, one tail light working and one not.
Both in the back, I’ve changed the light bulbs and it’s not that. What should I do next?
My question is if you have two brake lights on one side but one of them is out should you change the other one that isn’t nothing wrong with it
My driver side stop lamp only works when I step on brake on Escalade 09. So at night when I’m driving, I only have my right light working
Always enjoy your stuff
+Winston Cresser Thanks for checking us out! 1AAuto.com
On the 96 Tahoe brake lights are on but when you apply the brakes you get no brake lights. Checked fuses and replaced brake light switch and lights are on but when you brake no brake lights
Thanks it was helpful 👍
I have a 08 buick lacrosse. The brake lights only come on when the car is on. Is that a sign that the switch is going bad?
+Ricardo Contreras We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Can I run a wire from right side that works to the leftsde
How would I check reverse lights that are dimly on even when the car is off?
I have an 01 Tahoe z71 and when I press the break pedal my lights don’t come on but the yellow marker/ turn signal light comes one tho
+TriggeredTyler You can start by checking the bulbs.
Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What if the dashlights parking lights an tailights aren't working.
Fuses keep blowing?
+Trials and Tribulations We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have a 2002 mercury grand marquis. I took down my visor on driver side. Cut a wire that was connected to it and Now im not gettin any power to my ac/heat panel. Nor is my clock workin. Please help!!
I have tail lights turn single work emergency flashers work but my high mouth on trunk don't work or my break lights won't work had blown fuse replaced it still no brake lights checked the bulbs when I tried to get them out then brake lights came on but then went back out I left high mouth light unplugged so why won't brake lights stay working
2011 Jeep Grand Cherokee Laredo 5.7L. Rear passenger tail light out. Hazards work, brake lights work... Fuses good...bulbs good....socket bad? Just poured out a quart of water from the housing.
My brake lights came on with the headlights but did not light up when braking. my traction control light was also on. I had a blown fuse.. replaced it with the spare in the fuse box and no more traction light and my brake lights working again. I hope I haven't been driving with no brake lights all this time
What could be the reason my reverse lights aren’t coming on? They both went out at the same time and I’m stumped
I have a 2006 Silverado and all lights work but when head lights are one the break lights don’t engage, I replaced the switch and checked all fuses but the only way I can get them to engage is by shutting off my running lights, could it be the switch that controls the auto lights and on and off? Im so lost
+Adrian Negron We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@@1AAuto asking the audience
I have the same problem on 04 f150, did you figure it out yet?
Same issue here. Driving me mad
Really appreciate your videos!
Can u guys please do a tutorial on a 2011 camaro tail light dysfunction. If u need some info on my issue I can provide that as well I can’t find no videos on this issue
+LeQuesha Jenkins We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Hello I have a 2006 Dodge Ram 1500, I have no lights on the right rear side of my truck. the turn signal, brake light and reverse lights work when turned on, but just turning the switch on there is no lights on the right side
Well my problem is this = my tail light wiring was cut and I cleaned up the wires and the lights turn on but when I put my foot on the brakes only the passenger and the top light will light up but not the driver side , what should I do ??
Thanks a milli
Good video. My issue: 2004 Jeep GC : Left brake light only lights up when headlights on but stays on bright. I think have 2 related issues: The first one was the brake switch fuse. I replaced that and it helped(previously no brake lights were working) I got rid of the OEM taillights for aftermarket version which look cool but the issue still stays. I'm thinking it's a grounding issue. Gonna try to work on it today. This video got me inspired to check again.
I'm working with a 2002 suburban, no brake lights. I'm trying to find the brake light switch, this is my first time being under the dash, I've owned it for 10-11 years without any issues. I've checked the bulbs and the cyclops and none are working.
+Bobby Tucker We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Only one brake light is 3:55 working but botth taillights work???
I need help I have a 2001 Pontiac grand am when I press on brakes my left tail light uses the left signal like if it was a brake light and when I release it the idle lights glow so it’s not the bulb and also not the circuit board I just bought it
+Delfino Trujillo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have brake light signal works and when im braking it works, but no brake lights when i turn on the lights left side, what's the problem?
2007 Caddy Escalade . . . Installed LED Tailight / Brake Turn Signal fixture it was working for many years . . . TODAY . . . NO Brake Lights . . . T. S. work fine . . . EmerG Flashers work fine
My spoiler brake lights on but the car brake isn’t. Also my car no longer need to press brake to start engine anymore. Help pls
I keep replacing my brake switch and my brakes only come on sometimes, do you know what could cause that?
+EJ McClary We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
How much are mechanics charging for this kind of work ?
I wiggle my left side brake bulb then it works fine . I think the socket needs to be tightened up
What do you do if only your brake lights stay on? even if the vehicle is parked and off? The light switch and the front lights are off but both brake lights in the back stay on?
brake pedal stop pad
Thanks for the info...
I disconnected the tow harness, to drop hitch when installing 2" shackles. Both bottom lights are now out.
I currently have the same issue. Let me know how you fixed yours. Thanks
sip your beer EVERY time he says "ACKshull or ACKshully" .. you'll NEVER finish the video Hiccup!
My bulbs actually workc when on the 'on' setting, they just won't work when I press on the pedal.
Yes
what if my right brake light doesn’t work only when my night headlights are not on? it works when i turn on my headlights
I have this problem where my rear right bulb stays on but does not blink when I activate the turn signal. Front right does blink though, it’s just the rear one. Can somebody advise ???
Break Light only turns on when stopped completely! Help!
I checked every single fuse and switched them around, checked every solenoid and moved them around checked all bulbs, replaced the brake light switch. Still no brake lights. No 3rd brake light either.
Same. Did you find out the problem?
Omg me tooo!!!Did you ever figure it out?😊🙏please share
👍👍👍👍Awesome
+George True Thanks for checking us out! 1AAuto.com
What if the tail light bulbs are working, but aren’t getting brighter when you press the brake pedal?
Same problem. Did you find out what it was?
Very helpful!!!
What if my break lights work but won’t stay in when my lights are on?
It means it’s a fuse
Fantastic
+Mazhar Ali Thanks for checking us out! 1AAuto.com
what about grounds ???
In my car when the brake or signal light doesn't work the interior indicator light blinks fast on the side which doesn't work
What if break light turns on but not the regular light ?
+Sergio Flores We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Well I have a brake light issue all my other lights work my brake lights and the circuit board are all brand new I replaced the switch every relay I can find I put the fuse in and my brake lights stay on and but they won't go off until I pull the fuse out I don't know if it's a connection issue because I Arc something underneath the dash and it blew out my feet my fuse and I replaced the fuse now my lights to stay on and it's driving me nuts I'm going bananas I have a power probe when I'm short and open draw 3,000 I think it's called and on the when I have it plugged in it's saying I have a short on the right side and on the left side of the fuse it says it's open
What if my brake lights dont turn on when my headlights are on they work if my headlights are off
Could they have used a more rusted vehicle 🤔
🤣🤣🤣
My 2 sides aren't working when I brake
My break lights work but when I turn the car on they turn on with out me touching the break and when I push the break they won’t do anything sorry my English is bad but I hope someone understands me 🥴
Test light, I want those gadgets.
Now what if all of this doesnt work
Helpfulness.
My brake light only work when the lights are off
Why is it you ask about a specific yr make and model you guys always show a different yr or something not even lose to what you need to know ok w anout
My tail light is not working at all
+@christopherpalmer3468 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Brake Light Assembly For A 2002 Saturn LW200 Wagon