Diagnosing 7.3 No Start | No Crank No Start but Power to Dash

Checklist
1. Battery + Cables
2. Starter solenoid to battery
3. Starter solenoid to starter (With key cranking)
4. Starter
5. Neutral Safety Switch
Trucks, guns, fishing and hunting. Check out adventures, learn a thing or two about diesels and enjoy some laughs
Instagram:
@hayden_frey_fishing
@driven_diesel
Facebook:
Hayden Frey
Driven Diesel

[@mandavaler]

For anyone interested in a no electrical power issue, no cab light, no crank, nothing. I just fixed my 96 7.3 and the glow plug solenoid by the fuel bowl had a burnout internally breaking the electric circuit i replaced this $30 part and she fired right up

[@michaell4793]

I got a 97 7.3 auto I’ve checked everything that you showed and my truck still isn’t cranking. All lights on dash work. The ‘s’ line going into the fender solenoid isn’t getting power when key is cranking. When I jump the fender solenoid the starter is stuck turning and once truck fires up it still spins so I have to pull battery terminals. Only engine cuts off with the key. I have no blown fuses and the red/blue wire for the “s” line on solenoid looks good.

[@aiyannac5807]

Having the same issue

[@chrisguillen517]

@michaell4793 Have u found the problem

[@boomchaka7762]

I have an e350 7.3. I get power at the dash and the glow plug light comes on then turns off when ready. I then go to start and it won’t crank then I lose all power to dash. I have 2 batteries in good condition that I’ve tried and get the same symptoms. Also unable to jump start from a ford f250. Any thoughts? Thanks!

[@Realofficialdee]

Needs to know too

[@BootsSlootsNBoogie]

You figure it out

[@jdmrider]

I just shove my leatherman on the starter relay

[@tylerbellinger7526]

My truck is a 2000 7.3 all dash lights come on and I turn the key to start it and it clicks once. Can’t figure it out.

[@markosgarcia6998]

Did u end up figuring it out?

[@AffectiveEnergy]

@@markosgarcia6998 also interested

[@teaganhutchison1062]

@@AffectiveEnergy check the starter if the connections are loose on the starter itself

[@teaganhutchison1062]

Check for a loose starter connection, like on the starter itself just happened to my 96 7.3

[@maclainsudman876]

My 03 7.3L is having the same issue And im getting a p0603 code as well, if you have any suggestions or had any luck please let me know

[@janieherrera7991]

I got a 2001 7.3 no start no crank dash lights wait to start comes on and under the hood I hear the truck "take a breath" what could be my problem?

[@DrivenDiesel]

Wanna call me

[@DrivenDiesel]

480-280-0069