Opel Astra J - 1.7CDTi - SCV Cleaning - Suction Control Valve - Fuel Pump Regulator

Поділитися
Вставка
  • Опубліковано 8 лют 2025
  • Salutare prieteni. Daca aveti fluctuatii la relantiul Astrelor voaste, puteti incerca curatarea acestei valve SCV. In functie de uzura ei, operatia va fi un succes sau nu. Daca pistonasul valvei este prea uzat, atunci rezultatul nu va fi satisfacator.
    Atentie ! -
    1. Nu umblati la arculetul pistonasului, in sensul sa-l mai intindeti.
    2. Dupa curatare, regulatorul trebuie readaptat!
    Curatare regulator presiune (SCV) - Opel Astra J - 1.7 CDTi
    Opel (Vauxhall) Astra J 1.7CDTi SCV Cleaning.
    #SuctionControlValve #FuelPumpRegulator
    #OpelSCV #VauxhallSCV
    #ClaudeTube #31Claudiu
    Support the channel making a donation at www.paypal.me/...
    / claudetube
    Please also watch my playlists:
    My panel beater work: bit.ly/2xqE8VC
    Just mechanical: bit.ly/2XikZEO
    My Electrical - Electronics - PC & Car Diagnosis work: bit.ly/2RLwoa8
    PDR - Tools & Jobs: bit.ly/2KRjmaD
    DIY: bit.ly/326Ye5y
    Dash Cam & Traveling: bit.ly/2XGFudI

КОМЕНТАРІ • 246

  • @bricel.3162
    @bricel.3162 Рік тому +2

    Juste un message pour te remercier de ta video: grâce à toi j'ai pu changer moi même ce régulateur de pression!

  • @denisteleuta7937
    @denisteleuta7937 3 роки тому +3

    Multumeac am schimbat presa ieri tot ok. Merge totil bine. Bravo mersy pentru video..

  • @twtysvn
    @twtysvn 4 роки тому +3

    Multumesc mult! A rezolvat problema la Corsa D. Nu a fost nevoie de reinvatare, probabil datorita faptului ca n-am depus atat de mult efort la curatarea cilindrului. Mai multa munca am depus sa ajung la valva. La Corsa e inghesuit rau motorul.

    • @ClaudeTube
      @ClaudeTube  4 роки тому +1

      Cu placere. Ma bucur ca ai reusit. Este totusi o solutie temporara. Daca acel cilindru are uzura mare, vechile simptome vor aparea destul de repede.

  • @savic2412
    @savic2412 3 роки тому +3

    Multumesc! After following your procedure, issue with unsteady idle was solved! More important, fuel consumption went down from 7,2 liter per 100 KM to 6,4 liter per 100 KM in the same conditions. Opel Astra 2011 1,7 CDTI 125hp

    • @denisbogdan7533
      @denisbogdan7533 2 роки тому

      How do you get 6.4 l per 100km with 1.7 cdti 125hp? Cuz mine only gets like 8.2 on the lowest and I try to get it lower

    • @mihaillupu4967
      @mihaillupu4967 2 роки тому

      @@denisbogdan7533 depinde unde conduci, in oraș și eu am 8, pe autostrada 5-5.5

    • @romanviktor1090
      @romanviktor1090 10 місяців тому

      Salut.
      Incerc si eu aceeasi procedură insa după desfacerea suruburilor si demufare nu reușesc sa il misc din loc. Parcă e blocat. Vreo idee de cum ași putea proceda. Mulțumesc!

    • @Emeric62
      @Emeric62 5 місяців тому

      ​@@denisbogdan7533I have 6.2 and my car is 17yo. If i drive 150kph, instant is 7 liters. There's something wrong with your car, likely something in the exhaust or EGR that triggers regeneration too often

  • @almirkundo1430
    @almirkundo1430 4 роки тому

    Super je to sto se kod vas moze rastaviti taj regulator ,kod mog Opel Merive je fabricki zatvoren.Ja sam morao kupiti nov.

  • @leonardomelendez6972
    @leonardomelendez6972 11 місяців тому +1

    !BINGOOO! Compre un opel astra 2010 y venia con los mismos síntomas o incluso peor y gracias ati pude solucionarlo ojo que no soy mecánico ni nada solo seguía tus pasos pero no exactamente igual use una lija 2000 y papel de cocina e gastado como 5 euros y a quedado de maravilla se siente y corre mucho mejor y el motor se escucha mucho más tranquilo no ise la regeneración ni nada pero me da el mismo consumo que ati una ves que lo e echo espero dure mil grasias desde zaragoza España.

  • @acmthere3674
    @acmthere3674 2 роки тому +1

    Many thanks for your time and kindness, you are a master!

    • @ClaudeTube
      @ClaudeTube  2 роки тому

      You are very welcome

    • @mrpoochie01
      @mrpoochie01 Рік тому

      Do u have to reprogram them or can u just put it back in once cleaned

    • @acmthere3674
      @acmthere3674 Рік тому

      @@mrpoochie01 in my case I just put it back once cleaned

  • @atelier74
    @atelier74 4 роки тому +1

    Salut. Am aceeasi problema la Opel Astra H 1.7 cdti 125cp. In zilele acestea o sa rezolv problema. Multumim pentru clip!

    • @ClaudeTube
      @ClaudeTube  4 роки тому

      Salut. Ai rezolvat? Posibil sa-ti necesite adaptarea valvei dupa ce a fost curatata. Este bine sa ai un scanner Delphi la indemana.

  • @bosshugo5080
    @bosshugo5080 4 роки тому +3

    Big thumbs up.
    Am urmat pașii pe care i-ati facut iar acum nu mai are relantiul instabil.👍

    • @ClaudeTube
      @ClaudeTube  4 роки тому

      Ma bucur ca ai reusit. Totusi pentru a rezolva permanent problema, aceea valva trebuie schimbata.

    • @TheGiussi
      @TheGiussi 3 роки тому

      @@ClaudeTube salut,deci este mai bine sa schimbi regulatorul cu totul,asa.i? Mulțumesc anticipat

  • @mxxxsxxx648
    @mxxxsxxx648 4 роки тому +2

    Svaka čast na videu, hvala puno

  • @bocaviorel4798
    @bocaviorel4798 2 роки тому

    Multumim pentru video!

  • @Romanu.13
    @Romanu.13 Рік тому +1

    multumim

    • @ClaudeTube
      @ClaudeTube  Рік тому

      Sper sa fie de ajutor. Si eu multumesc pentru vizionare.

  • @tazmeno9878
    @tazmeno9878 Місяць тому +1

    Excellent ❤

  • @hajaadryan1699
    @hajaadryan1699 4 години тому

    Hi I have a zafira 1.7 cdti 2013 model I have same problem I have change the part whit a new one and it’s working very bad than before ..and I had to put the old one in again What is the problem thank you

  • @sergiomd9144
    @sergiomd9144 9 місяців тому

    Very good video, the powder you use is powder polish, what type is it?

  • @robertomanca3440
    @robertomanca3440 Рік тому

    Ottimo video, anche la mia ha questo problema, avrei 2 domande, la prima : bisogna configurare il sensore con diagnosi ? Io ho una normale obd ll non credo si possa fare.
    La seconda: una volta smontato il sensore, fuoriesce molto gasolio dalla pompa?

  • @federicolopez4905
    @federicolopez4905 Рік тому

    Thank you

  • @ssss-df5qz
    @ssss-df5qz 2 роки тому

    Watch out for the black hole for the bolts. Great fun trying to find them. It's like plinko if you drop one.

  • @daviddediego1
    @daviddediego1 4 роки тому

    mil gracias desde españa (sevilla ), de momento se le quito

  • @DonMikson
    @DonMikson 4 роки тому +2

    Hi. Did you use the same orings or the new ones ? It still working or it was only temporary solution and you change for new part?

  • @gabrielblasko5193
    @gabrielblasko5193 4 роки тому +1

    Hola es necesario reprogramar después de la limpieza o sólo puede limpiarse gracias

  •  5 років тому +1

    super awesome video my friend👍

  • @kristi7626
    @kristi7626 4 роки тому +1

    Thanks man . You helped me a lot 🙏

  • @gholamsakhi3780
    @gholamsakhi3780 3 роки тому

    Thank you i will try

  • @dzanadzana100
    @dzanadzana100 4 роки тому +1

    Does it still working fine, from the day you did the cleaning?

  • @waynejones8496
    @waynejones8496 3 місяці тому

    I’ve got a Vauxhall Astra van and mine is sounding the same where is the suction control valve on it

  • @Emeric62
    @Emeric62 5 місяців тому

    My normal idle is 0.9l/h. After i drive on the motorway and the engine is hot it falls to 0.4l/h with bad idle. Is it because of this valve?

  • @faridamiri4035
    @faridamiri4035 10 місяців тому

    Hallo, Dieses Video war sehr informativ, vielen Dank.
    Ich habe ein Opel astra h Benzin und habe ich das gleiche Problem, bei Benzin Auto gibt's auch die gleich teile kaputt oder gibt's anders.
    Ich freue mich auf Ihre Antwort.😊

  • @akvaverzum
    @akvaverzum 2 місяці тому

    Am cumpărat nou după o lună de zile a făcut la fel.
    Am cumpărat al doilea și se pare că va face la fel.
    Nu exista vreo soluție pentru a rezolva definitiv?

  • @alexgnom1875
    @alexgnom1875 Рік тому

    Merci für Video

  • @technocris1
    @technocris1 3 роки тому

    Multumesc pt video , am o problema asemanatoare , relantiul este ok , am fost la diagnoza si imi da overpressure , dupa ce schimb uleiul , nivel corect dupa 1000km nivelul creste , ceea ce imi spune ca o parte din motorina postinjectie pt curatarea DPF ajunge in baia de ulei , uneori imi apare DPF infundat in bord , dar la fiecare diagnoza dupa ce isi face regenerare pare ok ca si nivel de flow !? e adevarat masina face drumuri scurte !

  • @luigisarracino6932
    @luigisarracino6932 2 роки тому

    Ciao volevo un'informazione ti è mai capitato che la macchina si spegne subito dopo l'accensione? Potresti aiutarmi

  • @neagcosmin612
    @neagcosmin612 Рік тому +1

    Salut! Ce soluții ai folosit pentru curățare? Mulțumesc anticipat!

    • @ClaudeTube
      @ClaudeTube  Рік тому

      Salut. Cel mai simplu este sa cureti cu spray de frane. Eu am folosit ce aveam atunci prin curte....

  • @dota2forvillains185
    @dota2forvillains185 5 днів тому

    Hello from Bulgaria I have this problem but I have a question . I drive the 2010 Opel astra j . I changed the oil 2 times in the last 4 000 kilometers and my " remaining oil life " drops dramatically fast . Can some one tell me if this is related to the Fuel pump regulator from this video or something else . If it's bad just tell me to sell the car . Thank you so much .

  • @benedettolicchi
    @benedettolicchi 10 місяців тому

    good morning, I have a 2023 Opel Astra diesel. It gives me the same problem. They changed the common rail sensor but I've done a few km and it gives me the same problem and it tells me that there is little voltage. What could it be? Thank you

  • @daniellawrenson4437
    @daniellawrenson4437 4 місяці тому

    Where is ig located the valve im trying to fit a new one thanks

  • @houcinestrappe2342
    @houcinestrappe2342 3 роки тому

    Good job! How i can lear fuel pressure regulator with opcom please

  • @ALEXD0909
    @ALEXD0909 3 роки тому +2

    trebuie sa learm fuel pressure regulator sau nu trebuie numa curatat?

    • @ClaudeTube
      @ClaudeTube  3 роки тому

      La mine a trebuit reinvatat.

  • @ivanuremovic1199
    @ivanuremovic1199 Рік тому +1

    I have the same issue, but all of a sudden my car went into limp mode and it did not want to exit it. I took my car to the mechanic, he connected it on diagnostics and fuel pressure valve popped up. He programmed it again, but my car randomly enters limp mode while driving, so I just turn engine off and on and it works again. He ordered new valve and he will change it in a few days. A bit of a problem is that my Astra J GTC has two of them, so he needs to check first which one is faulty.

    • @MrFrankGallagher
      @MrFrankGallagher 3 місяці тому +1

      I just new halfway through your post it was leading to a vauxhall . Yep I have the dreaded astra this issue . Wait until until abs module goes its hundreds pounds . This diesel Astra Estate with 72k is going to auction as soon as that darn suction control valve is fitted . Astra j is a suction control valve on your bank account . I'm going back to Volvo

  • @ivicagrdur4898
    @ivicagrdur4898 4 роки тому +1

    great video, you're great, can you tell me what diagnostics tool you use, I want to buy something so I need advice and recommendation

    • @ClaudeTube
      @ClaudeTube  4 роки тому

      Hi. Thank you for apreciation. For this car you can use Delphi DS150 or OpCom.

    • @marianivascu8148
      @marianivascu8148 4 роки тому

      @@ClaudeTube va salut.
      Ce solutie/solutii a-ti folosit la curatare? Multumesc.

    • @vladrtm
      @vladrtm 3 роки тому

      @@ClaudeTube salut. Ma apuc si eu de asta in weekend la zafira mea B 1.9 8v z19dt. Si la mine a inceput sa fluctueze ralantiul ca la tine. O intrebare, cu OP-Com ai cumva idee cum se recalibreaza supapa SCV dupa? ms

  • @robertking9582
    @robertking9582 4 роки тому

    well done, thanks mate

  • @orgesallmeta3090
    @orgesallmeta3090 3 роки тому +1

    I changed the scv but the problem is still there, just a little bit more quiet, do you have any idea what should i do?

    • @ClaudeTube
      @ClaudeTube  3 роки тому

      Hello. I think you need to change that SCV valve and check the condition of the injectors.

  • @hitmen2025
    @hitmen2025 2 роки тому

    Could you pls let me
    Know where this is located on opel corsa c 1.7 dti 2001

  • @krtolebiohazardcs1.681
    @krtolebiohazardcs1.681 Рік тому

    Where is that pressure located on meriva b 1.7 cdti?

  • @tortillero7892
    @tortillero7892 4 роки тому +3

    cuidado con apoyarse en la tuberia de retorno del gasoil.con el tiempo se endurece y pueden partirse los conectores de las vàlvulas

    • @jjjjmh
      @jjjjmh 4 місяці тому

      Tengo el mismo fallo en mi coche. Es imprescindible ponerle el ordenador después de la limpieza?

    • @tortillero7892
      @tortillero7892 4 місяці тому +1

      @@jjjjmh para la scv no hace falta. Filtros Mahle cuando toquen,limpiar la egr y la scv,es lo que hacia yo.

    • @jjjjmh
      @jjjjmh 4 місяці тому

      @@tortillero7892 gracias por responder. Un saludo

  • @Michael-dp4fo
    @Michael-dp4fo 3 роки тому +1

    Good video what happens if I change the valve and have no computer to change fuel setting?

    • @ClaudeTube
      @ClaudeTube  3 роки тому

      After you start the engine, it will stop and so on ...

  • @krsovideo
    @krsovideo Рік тому

    It is astra j 81kw?

  • @al3xoradea
    @al3xoradea 3 роки тому +1

    Buna
    Ai putea sa imi zici ce model de tester folosesti
    Multumesc anticipat

    • @ClaudeTube
      @ClaudeTube  3 роки тому

      Salut Alex. Folosesc Delphi DS150.

    • @al3xoradea
      @al3xoradea 3 роки тому

      @@ClaudeTube Buna
      Mersi de raspuns daca se poate un link de unde lai cumparat
      Multumesc anticipat

  • @sautucok483
    @sautucok483 4 роки тому

    Thanks a lot sir

  • @fernandostanic2035
    @fernandostanic2035 2 роки тому

    Mine car jerks first few hunderd meters, mostly downhil. Revs are almost allways stable, but it jerks a bit for first two minutes

  • @Megalocade
    @Megalocade 4 роки тому +4

    I got to do this job on my 1 7cdti, I've had this idling issue since my van hit 100k mines I can see the fuel pressure dropping on tech 2 no doubt about it the scv is worn, mines denso and a none serviceable item unlike the Bosch ones are, so new scv for me, I've seen people sand and polish these it works for while but the bore is where the wear is sadly, you can turn them 180 which also works for a bit.

    • @sa.t.2507
      @sa.t.2507 3 роки тому

      Do I need to do the calibration on the computer after changing the pump or is it enough to just change out the part and drive?
      I can change the part but don't have a computer to hook it up.
      Greatful if you reply!

    • @Megalocade
      @Megalocade 3 роки тому

      @@sa.t.2507 depends how well the engine is running after you replace it usually ot will run fine afterwards, if its smooth and goes alright then it will relearn over time, if its lumpy then a fuel pump relearn will need to be done, mine ran fine afterwards but still went ahead and did a relearn, only difference i noticed was the engine was smoother.

    • @sa.t.2507
      @sa.t.2507 3 роки тому +2

      @@Megalocade ok thanks man! I will try and clean it out as some suggest. If i need to calibrate it I will rent a computer for like 15 euros and give it a try I guess. Thanks for your response!

    • @arrowblue3909
      @arrowblue3909 3 роки тому

      @@sa.t.2507 I didnt knew you could rent these computer or tabs? Where did you rent it from if i may ask?

  • @sr.x3928
    @sr.x3928 6 місяців тому

    I would like to take it apart but in the video you can't clearly see where it is located...

  • @fastenboalbus4997
    @fastenboalbus4997 4 роки тому

    merci

  • @dragosvintilescu217
    @dragosvintilescu217 Рік тому

    Tot se aude o oscilatie a motorului… foaaarte fina, dar cand esti in interior!

  • @TollyTolly
    @TollyTolly 4 роки тому +1

    What the problem about this valve i changed my 5 months ago, using just shell v power, and have same problem again

  • @alexandrugeorgescu4691
    @alexandrugeorgescu4691 5 років тому +1

    Super tare clipurile! Poate poti face unul si cu distribuția:D

    • @ClaudeTube
      @ClaudeTube  5 років тому +1

      Multumesc pentru aprecieri. La Astra pe care o detin distributia este deja schimbata, dar voi posta si alte clipuri cu Opel Astra J.

    • @emilion1093
      @emilion1093 3 роки тому +1

      Salut , spune-mi si mie cum a facut regulatorul de presiune ! Am vazut imaginile dar nu prea am inteles mare lucru ! Cu respect Emil !

  • @havardbjornestad
    @havardbjornestad Рік тому +1

    Do I have to learn the regulator if I clean it?

  • @bensalisaimuddin9480
    @bensalisaimuddin9480 4 роки тому

    my mitsubishi 4M50 engine The problem is hard starting, how to fix hardstarting? thank you

  • @vasilist7236
    @vasilist7236 3 роки тому

    After replacing my SCV on my astra J 1.7 (i used Denso the original part) i turned the key to ignition and the "dpf is full please continue driving" icon poped up...any ideas why that happened?

  • @bosnjak-bp-007
    @bosnjak-bp-007 3 роки тому

    What kind od software/Hardware do you have?And can you read the injector?

  • @TK42138
    @TK42138 5 років тому

    Useful video.
    SCV issues are common on Nissan Xtrail.

    • @djuiced5
      @djuiced5 4 роки тому

      Yeahh... me to..

  • @Obsessyon1
    @Obsessyon1 Рік тому +1

    am aceasi problema la un astra h 1.7 cdti 2011. am schimbat debitmetru de aer dar tot la fel. pentru curatare regulator de presiune as putea venii la dvs? unde aveti service? multumesc

    • @ClaudeTube
      @ClaudeTube  Рік тому

      Pentru lucrari si programari, te rog cauta KLU Garage. Multumesc.

  • @valychirila9830
    @valychirila9830 2 роки тому +1

    Salut am aceeasi problema...fara programul asta nu fac nimic?

    • @ClaudeTube
      @ClaudeTube  2 роки тому

      Salut. Daca nu o reprogramezi, risti sa nu mai porneasca motorul.

  • @mrnobody1608
    @mrnobody1608 4 роки тому

    Did your car vibrate/shake before you did this?

  • @vladstefarca4299
    @vladstefarca4299 Рік тому

    Sunteți din Brașov?

  • @trevhib
    @trevhib 5 років тому +3

    Hi again Claude. Another top video. I think they would be complete if you listed in the description the one or two products that you use. In this case the spray, abrasive and polish? Many thanks again and wow, what an amazing difference in fuel consumption at idle. I'd like to do this with my Astra but obtaining the Dephi software would be an issue.

    • @ClaudeTube
      @ClaudeTube  5 років тому +2

      Hi there. Thanks. In this case i used abrasive discs (2000 - 3000 -6000) and 3M polish (3 stage)

    • @trevhib
      @trevhib 5 років тому

      @@ClaudeTube Fab, thank you. Subbed :)

  • @sorinpascan
    @sorinpascan 3 роки тому

    Salut. Sti cumva ce numar are partul respectiv? Adica valva?

  • @carharttblade
    @carharttblade 4 роки тому

    Ive got Astra G 1.7 DTI (not cdti) that idles on some 1100-1200 rpm and rpms are jumping up and down, is that the same problem as here? Its not the same engine thought, your engine is newer, block probably the same but not sure about the rest

  • @3103dario
    @3103dario 3 роки тому

    W 2.0 cdti jest tak samo?

  • @razvancostan1013
    @razvancostan1013 4 роки тому +1

    Reinvatarea regulatorului se poate face si cu opcom ?

    • @ClaudeTube
      @ClaudeTube  4 роки тому

      Nu am incercat dar ar trebui sa mearga si cu OpCom.

    • @razvancostan1013
      @razvancostan1013 4 роки тому

      @@ClaudeTube Multumesc ;)

  • @pietrobenatti329
    @pietrobenatti329 2 роки тому

    buna ziua va rog, imi puteti spune ce material ati folosit pentru curatarea supapei? pana la urma trebuie sa refac datele supapei? multumesc un salut

    • @ClaudeTube
      @ClaudeTube  2 роки тому

      Salut. Eu am folosit pasta abraziva de lustruit caroseria. Daca nu umbli la arculet nu cred ca trebuie sa inveti supapa din nou. La mine a trebuit invatata.

  • @denisredzepagic5570
    @denisredzepagic5570 2 роки тому

    do you need diagnostics-calibration after replacing-cleaning this valve, sensor ??

    • @ClaudeTube
      @ClaudeTube  2 роки тому

      Yes, it's need.

    • @denisredzepagic5570
      @denisredzepagic5570 2 роки тому

      Is something wrong, If I don't do the calibration.
      Can i drive after cleaning sensor.
      Thanks

  • @riccardorodari7460
    @riccardorodari7460 4 роки тому

    Hi, thanks for video...can I change o-ring also and can I clean it with stell brush?

    • @ClaudeTube
      @ClaudeTube  4 роки тому

      Hi. There is a very sensitive area. You can't use the steel brush.

    • @riccardorodari7460
      @riccardorodari7460 4 роки тому

      @@ClaudeTube is it not less aggressive than a sand paper?

  • @DannyKey16
    @DannyKey16 5 років тому

    Great video 👍

  • @piotrptak9347
    @piotrptak9347 Рік тому

    👍

  • @Numeprenume10
    @Numeprenume10 3 роки тому

    Salut.. Eu am o Astra H 1.9 150cp.. Pun contactul, nu se accelerează deloc, dacă o las vreo 2 zile nepornita își revine, mai merg 2 ani relaxat apoi iar face la fel :).. Pe distante mici merg și fără accelerație în treapta mai mare de viteza.. Menționez ca de obicei apare problema dacă sta în soare.. Unii spun ca e de la pedala de accelerație, alții de la admisie, alții de la Ecu. Important e ca își revine singura.. Am pus și benzina în loc de motorina scotea fum mult și sunete ciudate și tot merge :)) e nemuritoare :))

    • @Emeric62
      @Emeric62 5 місяців тому

      Did you find a solution. I had several times the same problem with the 1.7cdti, the solution being to turn off the car and wait a few seconds

  • @013Djuka
    @013Djuka 3 роки тому +2

    Is this process with diagnostics at the end of the video important? What would happen if we just started the engine? Tnx

    • @ClaudeTube
      @ClaudeTube  3 роки тому +1

      Yes, it is very important. The engine will start and then stop on its own.

    • @013Djuka
      @013Djuka 3 роки тому

      @@ClaudeTube Can I execute the command via Opcom? Do not have Delphi.

    • @houcinestrappe2342
      @houcinestrappe2342 3 роки тому

      @@013Djuka the seam question

    • @013Djuka
      @013Djuka 3 роки тому

      @@ClaudeTube Just to let you know, I've fixed the part. I started the car without any problems, although I did not connect it to the diagnostics.

    • @goldenbridge-jb8cd
      @goldenbridge-jb8cd Рік тому

      @@ClaudeTube omg so how can i do ,if i clean it without learning,can you find solution,cuz here electricity enginner come one time ,we spend 300€。。。i.m in serbia

  • @iuliantibulca1174
    @iuliantibulca1174 4 роки тому

    Salut eu am un Opel Meriva 2011 1.7 disel și face la fel tot aceiași problema o fi?? Multumesc Mi-ar fi de ajutor dacă mi-ați Răspunde

  • @adyanaadyana8027
    @adyanaadyana8027 4 роки тому

    Salut, se poate curata și valvula de presiune de la turbo? Nu întra turbo în funcțiune... Mulțumesc

  • @jinga512
    @jinga512 5 років тому +1

    Salutare! Mai tii mite ce simptome avea masina cand fluctua acul? Sau ai pus testerul si ti-a aparut o eroare care incrimina valva SCV?

    • @ClaudeTube
      @ClaudeTube  5 років тому +3

      Pe tester nu aveam nici o eroare. Doar cand o apuca, incepea sa galopeze motorul si pe bord vedeam fluctuatiile turometrului. PArca, cu cat o alergam mai tare, cu atat mai rau galopa motorul. Dupa lustruirea cilindrului de la SCV, toate acestea au disparut. Insa, daca acel cilindru este foarte uzat, se rezolva doar prin schimbarea SCV-ului.

    • @jinga512
      @jinga512 5 років тому

      Claude Tube Multumesc de raspuns! Seara buna!

    • @szighetiszilard2686
      @szighetiszilard2686 4 роки тому

      Cum se face lustruirea cilindrului ? Eu am desfacut al meu si a iesit cilindrul dar acuma cand il bag inapoi nu se mai adapteaza prea bine si ramane cilindrul inauntru.... Sper sa primesc un raspuns...

    • @Cristi_Manea
      @Cristi_Manea 4 роки тому

      Salut! Am aceeasi problema la opel astra h 1.7 z17dtr. La mine pe langa aceste oscilatii , imi țăcane motorul. Am verificat injectoarele,masina nu scoate fum,nu consuma mult,nu are probleme cu pornirea...ce mai poate fi? Imi vine sa ii dau foc cu mine inauntru....

    • @danielanghele6578
      @danielanghele6578 4 роки тому

      relanti neregulat

  • @Upc88
    @Upc88 2 роки тому

    Salut, imi poti spune ce soft ai folosit ca sa invete valva scv?...eu am cumparat o valva scv noua pentru Meriva Z17DTH si as dori dupa ce o montez sa o adaptez cu ajutorul unui program...multumesc!

  • @bmarian9357
    @bmarian9357 4 роки тому

    Testerul delphi e original?

  • @lucianvlad9231
    @lucianvlad9231 4 роки тому

    Salut felicitări pentru filmuleț .am același model și aceeași problema îmi spui și mie te rog de cât sunt cheile cu care ai desfăcut valvola. Ms mult . apropo și eu sunt brasovean

    • @ClaudeTube
      @ClaudeTube  4 роки тому +1

      Salut. Din pacate acest filmulet l-am facut cu ceva timp in urma. Imi pare rau ca nu am prezentat si sculele necesare. Din pacate nu mai tin minte. Daca vrei sa faci aceasta lucrare sa tii cont ca-ti trebuie o diagnoza pentru reinvatarea acelei valve. Fara reinvatare la mine pornea, mergea putin si se oprea.

    • @lucianvlad9231
      @lucianvlad9231 4 роки тому

      @@ClaudeTube ms mult

  • @javieralvarez9146
    @javieralvarez9146 3 роки тому

    👏👏👏👏👏👏👏

  • @nicusorproca
    @nicusorproca 2 роки тому

    Buna ziua! Tocmai am schimbat și eu regulatorul la Zafira B și văd că am consum la relanti cam 0.7 L/h, uneori se face 0.8 și mai rar 0.9 sau 0.6 ( cu motor cald). Puteți va rog să îmi spuneți dacă ar trebui sa fac setarea din interfața sau daca este un consum ok?

  • @cristij8436
    @cristij8436 3 роки тому

    Ai idee culoarea aia albastra este de când e produsul nou pare sau s a făcut de la motorină?

    • @ClaudeTube
      @ClaudeTube  3 роки тому

      Eu cred ca este asa de cand este nou.

  • @mbz4652
    @mbz4652 2 роки тому +1

    What's the fault code for a faulty SCV? I'm getting P1259-11 high pressure fuel pump performance - high input as a fault code. Is this related to the SCV?

  • @red1lert
    @red1lert 4 роки тому

    Once that happens you get a lot of smoke?

  • @jamielee5199
    @jamielee5199 4 роки тому

    Hi I have a bit of a issue I tried taking it off and got one of the bolts suck or rounded and it won’t come off at all anyone got any suggestions

  • @marianivascu8148
    @marianivascu8148 4 роки тому +1

    Va salut.
    Ce solutie/solutii a-ti folosit la curatat. Multumesc.

    • @ClaudeTube
      @ClaudeTube  4 роки тому

      Salut. Eu am folosit benzina dar cel mai bun este spray de curatat frane. Succes.

  • @mohamedgul6444
    @mohamedgul6444 4 роки тому +1

    Bonjour M. tout d’abord je vous remercie pour la vidéo.
    Je voulais savoir, lorsque vous avez eu cette régulation instable, avez vous eu une perte de puissance ?
    J’ai le même problème sur ma Astra j, la régulation est instable et je trouve que pour une 110cv c’est assez mou.
    Merci d’avance

    • @yassb355
      @yassb355 Рік тому

      Bonjour, j’ai une Opel astra j 1.7 cdti 125 chevaux et j’ai la même déduction que vous, la voiture elle même se bride en puissance desfois

  • @coimanvasile6309
    @coimanvasile6309 3 роки тому

    Salut,ce fel de cablu ai folosit cind ai facut relearn la aceasta valva prin programul delphi?OP-COM sau altceva ?Multumesc

  • @miropretic9883
    @miropretic9883 3 роки тому

    Zasto se mora spajati na dijagnostiku nakon čišćenja,ja sam na svojoj očistio i radi mi mirno u leru,nisam dijagnostiku spajao,mozete li mi pojasniti da li moram to i zbog čega.Hvala pozz

    • @adams7362
      @adams7362 7 місяців тому

      Druze, kako se ovaj deo na autu zove na srpskom?

  • @AlexVladAtvVlog
    @AlexVladAtvVlog 3 роки тому

    Salutare,
    Dar daca iei borna la masina inainte...cred ca nu mai este nevoie se tester pentru readaptare sau gresesc ?
    As dori sa fac si eu operatia asta problema este ca imi lipseste testerul...
    Multumesc Frumos!

    • @ClaudeTube
      @ClaudeTube  3 роки тому +1

      Salut. Mai bine cauta pe cineva cu un Delphi DS 150 care te poate ajuta, inainte sa desfaci.....

    • @AlexVladAtvVlog
      @AlexVladAtvVlog 3 роки тому

      Salut,
      Am schimbat regulatorul pus unul nou, a pornit masina...am mers cu ea de marti pana azi...cand s a oprit ca si cum nu ar avea motorina...si pe tester din nou regulatorul...

  • @dragosturcu9959
    @dragosturcu9959 3 роки тому

    Am aceeasi problema la un astra h si nu am nicio eroare la bord. Este posibil sa fie tot senzoru asta?

  • @DonDux-nk1ht
    @DonDux-nk1ht 4 роки тому +1

    Salut, e valabil si pentru astra j cu valva scv versiunea mai lunga? Sau se poate pune scurta in locul celei lungi, ca am vazut ca e mai ieftina

    • @ClaudeTube
      @ClaudeTube  4 роки тому +1

      Salut. Daca iti oscileaza relantiul, banuiesc ca este tot de la SCV, Poti incerca sa-l cureti, in principiu face acelasi lucru. Nu stiu daca se poate monta cel scurt in loc.

  • @TheLightMyFire
    @TheLightMyFire 2 роки тому

    Are ceva daca nu fac re learn si doar schimb valva ?

    • @ClaudeTube
      @ClaudeTube  2 роки тому

      Posibil sa nu porneasca masina.

    • @TheLightMyFire
      @TheLightMyFire 2 роки тому

      @@ClaudeTube Am cumparat valva a pornit fara probleme (denso,si pompa e denso si injectoarele) si am descoperit ca e altfel umpic nu se poate desface curata am vrut sa o curat aia veche. Am mers la service sa faca relearn si e diferenta cer si pamant dar tot nu e stabil tot mai oscileaza umpic. Pe de alta parte de unde ati luat testerul delphi ca pe toate site-urile dau numa de clone si am deja dar nu merge pe masina mea da ceva eroare de comunicare si doar ca imi citeste codurile de pe motor altceva nu poate face.

  • @andreiminciuna7117
    @andreiminciuna7117 5 років тому +2

    Salut !daca il cureti si nu ii pui testerul după tot oscilează relantiul?

    • @ClaudeTube
      @ClaudeTube  5 років тому

      Fara sa adaptez valva SCV mi se oprea la relanti dupa ce am curat-o. Cunosc persoane care nu au facut adaptarea si nu au avut probleme.

    • @andreiminciuna7117
      @andreiminciuna7117 5 років тому

      @@ClaudeTube am curatat.o si merge perfect. mersi mult .

    • @dandavid3335
      @dandavid3335 4 роки тому

      @@ClaudeTube unde se afla aceasta valvola la opel antara 2013 2.2 disel si la mine la relanti oscileaza multumesc.

    • @mihaiemanoil4897
      @mihaiemanoil4897 4 роки тому

      @@ClaudeTube salut cum iti dai seama ca este infundata sau murdara ce simntome dă Multumesc

    • @eugencatalin2930
      @eugencatalin2930 3 роки тому

      Am și eu o întrebare și curățat doar cilindru sau și lăcașul din senzor că aia nu apare pe filmare?

  • @bellecars
    @bellecars 2 роки тому

    Salutare. Intampin o problema cu masina, sunt in concediu, din pacate nu o mai pot misca de pe loc. Imi poti lasa nr tau de telefon sa discutam putin despre acest regulator de presiune? Multumesc anticipat!

  • @KingOfTheRoad84
    @KingOfTheRoad84 3 роки тому

    Czy po takiej operacji konieczne jest podpięcie pod kompa i zrobienie kalibracji ? Czy będzie działać bez tego ?

    • @Wienio54
      @Wienio54 Рік тому

      bedzie cos nie tak ze spalaniem na postoju bo bedzie pamietal z czasow jak nie działało poprawine. Trzeba zrobic te uczenie niestety.