Just flash latest version of BF, make sure fc board direction is correct in the gyro calibration, then look up how to tune a micro drone. Mine flies great after scaling the throttle down to 55 - 65% in the PIDs for indoor. Then find your rates. Plenty of videos out there to do this. Fun little ripper!
Hey Caleb (BobbyFPV) I first seen you're build on a R/R Video and I knew I needed to build one. I just love flying micros and I have to have it in my collection. I'm very impressed with its size and weight. Congrats on the Bubito.
Cute little bugger! My last "small" quad turned out to be a 3" racer, way to powefull for indoor flying. 😑 Pro tip as an electrician... Stick the battery cables all the way through the holes and then tin them in place! This way you get a much more solid connection mechanicaly speaking, for those vigorous battery ejects, and you don't risk riping of the pcb pads. 😅
Love the drone curious if if can design a clip on mod or come out with a v2 that has some horns or guard or something as the camera sticks out and can easily be damaged with the wrong crash thx
This is so a cool drone. I also want to start fpv with so a littel drone, but a so good one is to expensiv for me. I‘m only 14 and go to school so i dont have a lot of money.
Love this drone! only thing I sincerely hate is the placement of the USB port... unscrew and move everything on top just to get to it. Other than that, I am super impressed and happy with it. I am terrible indoors but time will help.
Hey, love the Bubito build, bought one from you guys and just started messing around with it. When I arm the drone, the props spin up and then down rapidly, causing the drone to hop around on the ground even at the lowest throttle, then when I throttle up to start flying, it literally takes off and seems to have no control whatsoever - darts left and right at the very slightest touch of the pitch/yaw. I try just hovering in place but that's like trying to wrangle a wet pissed off cat into a bag...just not happening. I've built and flown a few drones of various sizes, never have I had such a hard time controlling a drone before, even in acro mode. Is there something off maybe in the config - do I need to tune it or something with Betaflight? Please help!
Sick dude I gotta get Me one of these things. Does it have the specialized bubby trick pack preset on it. If I push aux4 it Matty flips over myself. And brings me Uncrustables Sammiches
I had the Iflight one, I loved it. Yes this drone is inspired by the baby nazgul. This is a high quality micro drone. The baby nazgul had weak arms, slow motors, and low output vtx. If you want a slow underpowered micro drone get the baby nazgul
I want to ask, I have an axisflying cineon c20 frame and I am still confused about determining the brushless dynamo that I will use because I will bring a gopro hero 8 camera, what brushless dynamo should I use with a 2 inch frame?
remember, when you charge the drone in the air with the airplane maybe you should modify the drone to where there's a wire is dangling and it hooks up to the back of the plane like a real airplane in air fueling.😅
I can't wait until they make whoop frames this small. It might might less maneuverability, but more comfortable to rip indoors without having to worry about breaking it as much.
@bubby I am at the motor mounting step, and I bought a 1.27 driver. However, it's still too big to fit the tmotor screw head hex. Can you share where to get the driver you used? It looks to fit very well. Thank you
Yes batteries and components will be cheap and it will be harder to break it because it is so small and light. Also it allows you to fly in way more places than a normal quad where you have to worry about causing damage and people freaking out when there is a noisy 5in violently tearing through the air.
Hmm. Mine goes about 75 feet before the signal just completely going out. Versus this little crappy, Cedus pro has a 50mw VTX as well and goes 3x further. Anyone know why??
followed the instructions exactly and it wont fly. Boots up and spins propellers but wont fly. Propellers are in the exact positions he has em in, tried both the reverse spin motor and normal spin motor options in beta flight.
Protip: If your tiny wires are silicone sheathed like they should be you can just use your thumbnail to strip the ends. This avoids accidentally cutting all or part of the wire strands.
Just seen this, I have the ELRS version. No, I flashed the newest version of betaflight and slightly tuned it. Dailed FF back to .8, and I had a wobble during throttle punches so I raised PI I believe to 1.1 which took it away. I am pretty happy with how it flew with just that. A dump is a command line dump of everything programed onto the FC. The PID tune, rates, and other information would be contained in a CLI dump of a FC.
I have a tmotor f411 FC that came with mine, the dump in the description is for a flywoof411. If you need a cli dump for your bubito give me your email and what you would like your binding phrase to be. I'll email you mine with your binding phrase so you can get in the air.
Someone should start a trend of using a rectifier diode or other simple device to add reverse polarity protection to drones. Shouldn't need to worry about blowing up the drone because +/- wires are backwards in 2022
If one is smart enough to solder a rectifier then they can probably check the polarity anyways. Also smoke stopper helps when there is a short circuit maybe due to soldering error, so better to use smoke stopper for the first time.
@@BubbyFPV thanks for taking the time to reply. Sadly that’s not an option because we get hit with a hefty import tax + customs tax on top of the retail price. That’s for any purchase that is done outside the EU. 😔
I like it. I saw you flying it in the repair room, and I was impressed, I thought it was a normal tiny whoop at first...also nice print for the mounting.
I love how the school doesn't bother you when you wanna fly around the cafeteria tables
That was at a Rampage in the build and repair room 😁
Just flash latest version of BF, make sure fc board direction is correct in the gyro calibration, then look up how to tune a micro drone. Mine flies great after scaling the throttle down to 55 - 65% in the PIDs for indoor. Then find your rates. Plenty of videos out there to do this. Fun little ripper!
I like the new intro better than the old
Unbelievable little build Bubby! I love it! Sick ripp too!
This is what all build videos should be like. Awesome product too Bubby, this little thing is real tempting!
I told you years ago that micros were awesome !
What an amazing little quad. I'm definitely picking one up once they get back in stock
They are in stock now :)
@@FPVMama Sweet. Thank you much 😊
This is just what I've been looking for. Been wanting a small freestyle drone to fly
Hey Caleb (BobbyFPV) I first seen you're build on a R/R Video and I knew I needed to build one. I just love flying micros and I have to have it in my collection. I'm very impressed with its size and weight. Congrats on the Bubito.
love the Bubito Bubby! Nice little shredder.
that is the most legit quad i have seen in that size category.
What’s the weight?
I plan on grabbing one of these soon, but I’m also already past 4.3 with my other drones. Any chance the 4.2 dump will be updated?
I heard the GNB27 was actually a better option for 1s as its lighter and performs practically the same as the BT2.0. Plus its a lot cheaper
Great video young man
Cute little bugger!
My last "small" quad turned out to be a 3" racer, way to powefull for indoor flying. 😑
Pro tip as an electrician... Stick the battery cables all the way through the holes and then tin them in place! This way you get a much more solid connection mechanicaly speaking, for those vigorous battery ejects, and you don't risk riping of the pcb pads. 😅
Hey, I just purchased the diy kit are you going to publish the 3D printing files?
Message me on Instagram I’ll send em to ya
Nice build, Bubby 👍
Oh hell yes this has built in frsky! Gonna have to get me one now hehe
Makes the tiny hawk look huge
Awesome build, looks super cool!
watch-out : skills not included in the kit.
Cute lill powerful drone, I may buy one soon !
Thanks for video bro. You are best!
be sure that you have an x9m or similar radio add on or else it's gonna be a pain to bind to your radios, for this Frsky SPI option
Any chance you’re gonna update the dump for Betaflight 4.3?
I’m crossing my fingers before I pick one up that it’ll work with 4.3.
Love the drone curious if if can design a clip on mod or come out with a v2 that has some horns or guard or something as the camera sticks out and can easily be damaged with the wrong crash thx
Do you have international shipping?
This is so a cool drone. I also want to start fpv with so a littel drone, but a so good one is to expensiv for me. I‘m only 14 and go to school so i dont have a lot of money.
I wants one sooo bad hopefully my wife gets for my bday lol only quad i really really been wanting
Love this drone! only thing I sincerely hate is the placement of the USB port... unscrew and move everything on top just to get to it. Other than that, I am super impressed and happy with it. I am terrible indoors but time will help.
Your soldering scard me
Same
Hey, love the Bubito build, bought one from you guys and just started messing around with it. When I arm the drone, the props spin up and then down rapidly, causing the drone to hop around on the ground even at the lowest throttle, then when I throttle up to start flying, it literally takes off and seems to have no control whatsoever - darts left and right at the very slightest touch of the pitch/yaw. I try just hovering in place but that's like trying to wrangle a wet pissed off cat into a bag...just not happening. I've built and flown a few drones of various sizes, never have I had such a hard time controlling a drone before, even in acro mode. Is there something off maybe in the config - do I need to tune it or something with Betaflight? Please help!
Sick dude I gotta get Me one of these things. Does it have the specialized bubby trick pack preset on it. If I push aux4 it Matty flips over myself. And brings me Uncrustables Sammiches
Iv been thinking about that for a long time. Eventually in years to come, they will probably get to that point. Where you put a trick on an aux.
😂😂😂
You can get this drone RTF from Iflight and no iflight dont copy it from Bobby. Bobby copy iflight
What's the model called? And how much
I had the Iflight one, I loved it. Yes this drone is inspired by the baby nazgul. This is a high quality micro drone. The baby nazgul had weak arms, slow motors, and low output vtx. If you want a slow underpowered micro drone get the baby nazgul
@@BubbyFPV imagine copying iflight bobby
how could you lmao
Damn, when did Bubby start looking like a grown ass man? I swear he was still a kid a few videos ago.
😂🤣😂🤣. Everyone gets older. You didn't know that?
I want to ask, I have an axisflying cineon c20 frame and I am still confused about determining the brushless dynamo that I will use because I will bring a gopro hero 8 camera, what brushless dynamo should I use with a 2 inch frame?
How large can the battery be? The 2.5 minute flight time listed online seems so little that you wouldn't be able to do much
Nice drone
Well done!
remember, when you charge the drone in the air with the airplane maybe you should modify the drone to where there's a wire is dangling and it hooks up to the back of the plane like a real airplane in air fueling.😅
I wounded if you can put the insta360 go on this quad
lo que no entiendo es para que romper las bolsas plásticas, acaso no sabe que tienen cierre y que son reutilizables?
Pretty cool Bub's!
i cant wait till youre able to get a vista on one of these mannnnnn sadge i dont have analog gogs
Good tutorial video.
Bringing analog back?
Yeahhhh Bubby. I wanna build an Avatar version of this, because I have no desire to fly analog any more. :) looks like the Avatar should fit. 🤔
Avatar will fit nicely! Definitely gonna make a version with avatar :)
Quad looks well good.
Drinking game that will get you hammered after watching any fpv tutorial. Take a shot every time someone says "go ahead."
Bahahahaa ya I say “go ahead” a lot 😂
What fpv headset and controller can be used with this?
I can't wait until they make whoop frames this small. It might might less maneuverability, but more comfortable to rip indoors without having to worry about breaking it as much.
I could have swore whoop frames ARE that small and even smaller. 🤔
New to the sport. Haven't used Windows in over 2 decades. Any resources for open architecture FPV? Like "the Linux Gamer"
I need one of these but im going to need to put an elrs receiver
We sell it with elrs now 😁
@bubby I am at the motor mounting step, and I bought a 1.27 driver. However, it's still too big to fit the tmotor screw head hex. Can you share where to get the driver you used? It looks to fit very well. Thank you
Does it really make much of a difference if I use the other power cable??? All my 1s batteries have the other connection
Would it be a good idea to start with this from as a started drone?
Depends what you want
Such as size power style of flying
Yes batteries and components will be cheap and it will be harder to break it because it is so small and light. Also it allows you to fly in way more places than a normal quad where you have to worry about causing damage and people freaking out when there is a noisy 5in violently tearing through the air.
I don’t have much space to fly. So I was looking for a small starter drone and I happen to come across this video.
@@CharlieNDaTree for inside I would recommend a tiny whoop as a beginner, this will be really really hard to control inside. For outside it's great
Hmm. Mine goes about 75 feet before the signal just completely going out. Versus this little crappy, Cedus pro has a 50mw VTX as well and goes 3x further. Anyone know why??
when bubito with hd camera and 2s?
followed the instructions exactly and it wont fly. Boots up and spins propellers but wont fly. Propellers are in the exact positions he has em in, tried both the reverse spin motor and normal spin motor options in beta flight.
Your back motors are rotating in the wrong direction, you have to change the motor direction of both back motors from blheli software
@@davidcaballero2871 I ended up swapping and resoldering red and the yellow wire; apparently swapping any 2 wires will achieve a different rotation
Practice your soldering skills RC fans. Also adding flux when soldering will yield better results. Flux core solder is a compromise, add flux!
I was not expecting that breakcore at the end lol
Protip: If your tiny wires are silicone sheathed like they should be you can just use your thumbnail to strip the ends. This avoids accidentally cutting all or part of the wire strands.
I would love to see a HD version in the future. Great video!!! Keep it up Bubby!!
Can an o3 air unit fit to this frame?
Fun little drone! Is it possible to enable a turtle mode?
Can you do an hd version?
Would my baby nazgaul frame fit this Iao? Mine shited on me I’ve been tryna find a replacement iao
cant bind it i tryd the cli dump but shows errors
Can i get this with an elrs receiver
more micro fpv dvr
Some day digital will get this small.
Workin on it ;)
@@BubbyFPV With a pink spoiler please!
Bubby does not like that jst ph2.0 plug.
Lol.
Should of made the top plate wider with a hole for micro USB plug thru it
I wish I watched this before I built mine upside down lollll.
hey did you use ELRS? Did you use the dump on this video? Is a dump a tune? Or did you have to tune it yourself? Thanks!
Just seen this, I have the ELRS version.
No, I flashed the newest version of betaflight and slightly tuned it. Dailed FF back to .8, and I had a wobble during throttle punches so I raised PI I believe to 1.1 which took it away. I am pretty happy with how it flew with just that.
A dump is a command line dump of everything programed onto the FC. The PID tune, rates, and other information would be contained in a CLI dump of a FC.
I have a tmotor f411 FC that came with mine, the dump in the description is for a flywoof411. If you need a cli dump for your bubito give me your email and what you would like your binding phrase to be. I'll email you mine with your binding phrase so you can get in the air.
Pretty sweet I want one.
Is it 1s
*я собираюсь пойти дальше и написать комментарий* Прикольный квад, хочу что-то подобное собрать.
I realize most of you guys are pros.
Make sure you keep the long antenna out of the props.
Like a zip tie and some heat shrink.
Just sayin.
Bubby!
Yo!
This is gonna sell out fast 🤩
they've been out for over a month
There in stock right now :)
If the remote ID thing screws us, I'm just gonna grab this type of drone and build a course for it. Screw it!
If you want to use a smoke stopper, you will probably have to temporarily solder an xt30, or use a bt30 to xt30 adapter.
Someone should start a trend of using a rectifier diode or other simple device to add reverse polarity protection to drones. Shouldn't need to worry about blowing up the drone because +/- wires are backwards in 2022
If one is smart enough to solder a rectifier then they can probably check the polarity anyways. Also smoke stopper helps when there is a short circuit maybe due to soldering error, so better to use smoke stopper for the first time.
@@prafulgupta7004 it's more of a recommendation for the OEMs to include a smd diode on boards
The coolest build I've ever seen👍👍👍🔥🔥🔥
How to get this in Europe? Any reseller in EU??
Rotor riot ships to Europe iirc
@@BubbyFPV thanks for taking the time to reply. Sadly that’s not an option because we get hit with a hefty import tax + customs tax on top of the retail price. That’s for any purchase that is done outside the EU. 😔
Super happy!
Has he made a 2s??? 😂
indoor without prop guards lmao
dude must have a plaster+painter side job
If you suck so bad you’re able to take a sub 50g quad and do plaster damage? Dude…
This kwad auw literally is 32 grams… won’t do any damage to your walls lol
CLI dump has errors
land now! hehe
its also really good at collecting dog hair out of every corner of you house :P
also to everyone won a "2 DJI MINI 3 PRO" dont get scammed pls
ANALOG AHHHHA HAHAHAHAHAHAHAA
Would be cool if you could order this with a HD option.
Imma work on that :)
@@BubbyFPV O3 unit bubito?
Please please please PLEASE get some stock in europe!!!
I like it. I saw you flying it in the repair room, and I was impressed, I thought it was a normal tiny whoop at first...also nice print for the mounting.
Thanks Bubby - just ordered a kit!!
This flight controller is completely different from the one with elrs used now, make a updated video man.
thuper thweet.
🤘🤠
Did anyone else notice that we all "won" a DJI Mini 3 Pro? I do believe that youtube is hacked.
That's awesome!
I could fit an air unit in it. no problem