Hey, I'm also currently putting on the kraftwerks too. I was wondering if you had a problem with the intake manifold touching the alternator positive cable that is covered over a rubber boot. Did u have to shave off a little bit of the intake manifold for clearance between the alternator positive cable
hey man love the video and loved the video i have a 2007 civic sedan ex and im going for pro audio just wondering did u install a new stereo if so what all parts did you use thanks again and loved the video
I'd say if ur going more into track, adding some aero parts like canards or a wing and idk but i think widening the wheel base or even taking off some more weight by getting cf door panels ( kinda expensive and may be unnecessary)
Dante Boyce I did it about 3 years ago and can’t remember the exact product but it’s carpet paint basically and you’ll have to remove the entire head liner and pillars to do it
You should do Racing Hart Wheels in 18"inch black or chrome, they're classic but great reliable wheels. Tribute to Type R Super Steet Honda Coupe and The Fast and Furious original film. Just sayin', do you G. 🚗
You need a tl type s brake master cylinder. Big difference in pedal feel and travel. Cusco bolt in cage. Water meth kit. Poly bushing everywhere. Oil cooler. Fd2 oil pump. Clockwise motion oil pan baffle. Trac tuff cam oil mod. This is next on my list.
How is the fitment with the carbon fiber fenders and 17X8 +35? I have the seibon USDM carbon fenders and they are wider then stock which I'm sure your's are too. I have 17X7 +35 wheels and the fitment is not so great so I added a 25mm spacer in the front to give it a better look. However I plan on getting a different spec wheels.
My Hybrid V2 Shifter completely came apart at the track. I am having the same issue. Had to re-tighten everything while I was there. I am gonna get some threadlocker to see if it helps.
I'm so late to this but how did you get rid of the 3rd gear issue? I tried Amsoil Synchromesh and I have a new CMC and slave. My gears feel so crunchy and clunky.
Matt Klinger never got notified for the message sorry for the late response but yes the clutch has been fine so far but eventually it will go and I’ll go to a more aggressive clutch!
why dump so much money into a Honda Civic ? , u could have probably bought a stock C6 Corvette with +400hp for that money , this is what i realized when i started modding my Honda Prelude back in day
Corvettes are nice but Im a Honda head at the end of the day. When your pulling on a higher end car with a Honda trust me when I say there is no better feeling!
![K-TUNED VENTED VALVE COVER AND HYBRID RACING FUEL RAIL | SUPERCHARGED HONDA [4K]](http://i.ytimg.com/vi/H_MXwbS92l0/mqdefault.jpg)
![K-TUNED VENTED VALVE COVER AND HYBRID RACING FUEL RAIL | SUPERCHARGED HONDA [4K]](/img/tr.png)
A simple mod to help your car would be suspension bushings.simple and will give it a better feel to car over all
Bro I miss this car.
Hey, I'm also currently putting on the kraftwerks too. I was wondering if you had a problem with the intake manifold touching the alternator positive cable that is covered over a rubber boot. Did u have to shave off a little bit of the intake manifold for clearance between the alternator positive cable
hey man love the video and loved the video i have a 2007 civic sedan ex and im going for pro audio just wondering did u install a new stereo if so what all parts did you use thanks again and loved the video
Blake Vance hey no this build is more of a track build so it’s all oem
You are SOOO underrated bro.
Marly Villilo really appreciate that bro! I’ll keep grinding till it’s my time!!
For more power get the new bigger blower, you'll have to cut a hole in your hood but the hp gain will be worth it
I'd say if ur going more into track, adding some aero parts like canards or a wing and idk but i think widening the wheel base or even taking off some more weight by getting cf door panels ( kinda expensive and may be unnecessary)
really interested in your interior roof lining. what products did you use and any pics of the final result?
Dante Boyce I did it about 3 years ago and can’t remember the exact product but it’s carpet paint basically and you’ll have to remove the entire head liner and pillars to do it
How did the SuperCharger hold up after all these years? Cheers!
Been waiting for thiss hahahah wish i could smash the like button
Harold Dwight Kwan I’m happy I could deliver!
You should do Racing Hart Wheels in 18"inch black or chrome, they're classic but great reliable wheels. Tribute to Type R Super Steet Honda Coupe and The Fast and Furious original film. Just sayin', do you G. 🚗
Sonico_ Talons that’s a great idea! When I look into new wheels I’ll consider these!
What would you guys like to see next for this build??
Chris Lowpes rear suspension( lca’s tie bar etc.) have you heard of the tanabe front strut sway bar. Looks really aggressive
You need a tl type s brake master cylinder. Big difference in pedal feel and travel.
Cusco bolt in cage.
Water meth kit.
Poly bushing everywhere.
Oil cooler.
Fd2 oil pump.
Clockwise motion oil pan baffle.
Trac tuff cam oil mod.
This is next on my list.
Smaller pulley
Fully gutted interior
A flocked dash would be cool doesn’t really add much but less reflection on track.
Flex fuel
More booooost
more weight reduction project 👍
How much horsepower?
whered you buy the boomba mounts looking to upgrade mine
How is the fitment with the carbon fiber fenders and 17X8 +35? I have the seibon USDM carbon fenders and they are wider then stock which I'm sure your's are too. I have 17X7 +35 wheels and the fitment is not so great so I added a 25mm spacer in the front to give it a better look. However I plan on getting a different spec wheels.
I have no issues at all with rubbing, The carbon fenders are wider then the OEM csx ones so I have more room.
I have the same problem with my shifter I got the hassport mounts and I think that’s it
Brian Camargo yea I’m going to use lock tight soon!
The power u made was that to the wheels? And was it on 93oct??
The power is to the wheels on 94oct
My Hybrid V2 Shifter completely came apart at the track. I am having the same issue. Had to re-tighten everything while I was there. I am gonna get some threadlocker to see if it helps.
At least I know I am not the only one experiencing the same issue. I am going to try the thread locker as well
@@ChrisLowpes blue threadlock takes care of the issue
I'm so late to this but how did you get rid of the 3rd gear issue? I tried Amsoil Synchromesh and I have a new CMC and slave. My gears feel so crunchy and clunky.
Unfortunately I didn’t, most of the time it’s the actual synchro
Bro where is the trunk from?!?!?
Hey Chris where did you buy the spoiler for your civic?
Carlos Sejas that’s a demon carbon fiber trunk it’s vis
You should do a dark grey
Hows the clutch hold up with the power of the car?
Matt Klinger never got notified for the message sorry for the late response but yes the clutch has been fine so far but eventually it will go and I’ll go to a more aggressive clutch!
Question did u upgraded gaz pump?
Luis Martinez yes I have a deatschwerks dw300 fuel pump
I'm so confused; so I just bought my first car--'09 CSX--and I found Lowpes. I just don't know if he has an Si or a CSX. Someone help?
Manoj Ramkissoon it’s an Acura Csx Type-S, I refer to it as a civic as it’s easier for people to understand
@@ChrisLowpes holy shit you replied!!! And that's understandable too 😂, but I love the build
Manoj Ramkissoon lmao! I try to respond to all my comments and thanks buddy! 😁
The potato salad will return
What you getting 1/4 mile times getting close to same setup
I haven't done the 1/4 mile yet, I just brought it to some open lap days.
what car?
Are u on coils or springs
I have HSD monopros
@@ChrisLowpes is it coils? I got a fa5. I like this setup.
Why does no one put links in the descriptions ts so dumb like why make a vid if u not ganna put the parts in the bio
R18?
K20z3
What front brake calipers?
B16A5 EK4 they are TL type S brembos
@@ChrisLowpes TL Type S Centric rotors?
B16A5 EK4 Honda S2000 brakes and rotors
@@ChrisLowpes Ok. Thanks for the info.
B16A5 EK4 no problem, I have a video on the install if you need more info
head package supertech
Is that a 2007 Honda gx?
Mr. Friday it’s a Acura CSX Type S
custom mix championship white
gear x gear set
why dump so much money into a Honda Civic ? , u could have probably bought a stock C6 Corvette with +400hp for that money , this is what i realized when i started modding my Honda Prelude back in day
Corvettes are nice but Im a Honda head at the end of the day. When your pulling on a higher end car with a Honda trust me when I say there is no better feeling!
Where the hell do you get the cash to do all this??! Lol
Tai Ezenwa I was working 2 jobs 16 hour days and UA-cam for 3 years
Built bottom end more boooost
Meth injection