I don't always buy balisongs. But when I do, I prefer very expensive ones that I make snobby videos about. Stay salty my friends. (Thanks, glad you enjoyed the video)
Unbelievable collection, Ive never seen anything like this. Thank you for sharing. I wish Benchmade would just bring back the 4x series, even if it were only for limited drops.
Your collection is VERY impressive! It's a shame you don't flip but I am glad that someone is keeping track of all of them and collecting pieces of history.
Genuinely fantastic collection. I couldn't bring myself to flip them but just admiring a collection like this should be enough for anyone with two brain cells. GREAT vid.
I love balisongs i only knew a few Benchmade models. This is very interesting seeing how they changed when time passes. I like to learn about new stuff when i get the chance! Great video!!
When i see Balisong knifes and lots and lots and another,lots of types on today's market,hi tech materials and then only think,what we have before 10+ years when i start with flipping and learning some hard combos with many Chinese and other bad,crappy,falling a part knifes and get lucky if we find only one so so "good" Bali and we are so happy..You guys don't have a clue how lucky you R
The majority of these were widely available on eBay back in the early 2000s i remember collecting the low end balisongs like jaguars and bear and co for under $30. Benchmades were sold for about 150-200 new and used ones would go from $75-$200. I was just outta high school a kid working a part time job so I never wanted to spend more then $50 on a balisong. Most of my small paycheck went to the movies on the weekend and dining the high school sweetheart. Wish I picked up a few of these. Always wanted the 49 after seeing the movie face off. Also fact fact u could buy almost any model back in 2000-2003 on Asian knives.com and knifezilla I remember seeing them very cheap not even sure if those knife sites still exist
I was finally able to pick myself up a Benchmade balisong and honestly everything about it is so cool to me I'm glad I did. Not only use it made back in 1985 which means it's pre a Benchmade, Benchmade balisong, not only is it one of Benchmade very few Japanese made balisong, and not only did it Inspire the name butterfly knife, but the blade was hand-ground by the same man who made the swords for the Conan movies
Great collection! Appreciate you sharing I'm and betting your collection has grown since the making of this video . It would be nice to see any new blades you aquire .
This is what butterfly knives are supposed to look like in my book. That classic silver skeletonized handle look is so menacing. Half of these boutique knives now days look like a fucking 20 dollar multi-tool. I'd be happy to get one of these one day to stand above my cheap ones
Very impressive collection and i personally,never so collection like this one...beautiful...you are a lucky guy for sure!!You need a money and a time and a lots of luck to find and collect so many nice knifes and i envy you,specially cos i love very much Balis but have only some Chinese s#@t in my country...but what to do!!Love your collection and good luck for trucking more nice Balis and everything best ! ! !
Thanks. It does take a certain amount of luck, especially in the beginning. You need to have funds ready for knife drops, and those are hard to anticipate coming from private sellers. In the later stages you get to know people and finding rare pieces gets easier, though no less expensive.
Surprised I did not see a anodized 42A T latch in your collection I think they were a limited of 500 I had one stolen many years ago wish I still had it only recently did I get a great 42 I live close to th BM factory and have wandered in many times over the years seeing a few of these peices great collection by the way Amazing
Very impressive collection, thanks for sharing it. Minor correction: the 41 (and other 4x series) handles were both cast AND machined. You have to machine it after casting to get the flat smooth faces and accurate holes. If you didn't, the handle would have the rough texture that you see on the inside of the tang pin cups (not to mention that the tolerances would be abysmal). Also that bit about the mother of pearl cracking because of expansion isn't true. Mother of pearl is very commonly used as an inlay in wood (like in guitar fret boards) and wood expands and contracts far more than any metal due to absorbing and releasing humidity
Insane video great collection, your Bali’s are very nice and it would be great to see some individual videos going a bit more into depth about the anatomy an history of each blade, maybe start of with the three DM Bali’s.
Nothing like showing a collection on youtube then sitting back and waiting for.....BOOOOOOM!!!!! Great collection and I hate balisongs. (shhh....dont tell anybody!).
I subscribed at 01:05 bro. You are a repository of Benchmade balisong data and do due diligence in preparation. How this video isn't at 50,000 views is a mystery. I'm going to benge watch your channel 😁!
hey bro ...i have a pacific cuttlery ...which was benchmades first name ...first run pat num4,364,174 balisong has the butterfly on blade ...stainless steel milled handles. beautiful except for the very tip on knife is broke...factory can put new tip on on it will just be shorter but still retain blade stampings...u need this for your collection...let me know if interested ....very rare
I dug outa my toolbox an older bali song butterfly knife no numbers on it, black handle w/stainless holes in black get smaller towards blade, I cleaned it up and its incredible looking-I'm guessing 0ver 25 yrs old- trying to ID
Im gonna rob this guy's personal favorite balisong, go out the house, flip it while recording and put it back into the collection with a note saying "thanks dood"
Awesome collection man ! I have a benchmade balisong,I fucking love it,the design,sharpness and weight all are lit !! Just started a day ago,had to cover the blade with tape 😂😂 !!
Is there such thing as holy trinity of knives in Balisongs? For example Chris Reeves, strider, hinderer. Looking for few balisongs to buy to keep for my collection
Unlike some of the people in the comment section, I envy your collection of balisongs. I'm not going to complain or say that you sound like a snob and are showing off these knives to brag. I imagine you have a job which is how you are able to buy all these knives and that it took a while to get all of them. By the way great collection.
HDGameplayer14 I think he's a grave robber mostly from newspaper clippings & toenail clippings. Also, he's possibly a Dole trust fund holder with a lucky knack for winning scratch tickets. I dunno. Perhaps he lives across the street from the factory ? Gets friendly at coffee breaks and burritos. Or he's a robot absolutely for sure so help me God!!!!!! Woo!
i must have watched this 10 times, im new to the bali world and of course i would love a 42 may i ask could you guide me on where i might be able to locate one sir.....BTW, awesome collection!!
I'm sitting here, with my most expensive knife being my Bradley Kimura 7, I'm just like "He's touching those knives with his fingers????????? Fuck i'd be wearing 9 pairs of gloves so I get NO finger oil or anything on em..." #paranoid.. #knifescrub
Reality Reptiles what's the point of having something you're worried about touching. People wear out $200 knives and buy new ones all of the time. I guess collecting is different though.
as a Benchmade collector all I can say is HOLY CRAP
YOUR SO RIGHT
he has real 42s i was like holy shit
Ike I NEVER WVEN KNEW THISNMANY EXISTED WHAT THW CRIXK HOWWW
also I like your videos
@Professional Influencer your right im not a really much a fan of knives anymore im paintball guy and 2 i dont really have most of my knives anymore
You haven’t posted for a year, where are you man??
Please do an update or just more of this PLEASE!
Ikr
Loolll
@@unhandyflyer447 yes
hi
Where are you dude?
Lots of salt in these comments.
Very informative video, and great job with this collection.
I don't always buy balisongs. But when I do, I prefer very expensive ones that I make snobby videos about.
Stay salty my friends.
(Thanks, glad you enjoyed the video)
Lol fuck the salty kids keep doing what your doing man
1986mpv can I borrow the salt I need some
@@1986mpv ur at 69 likes
Finally, somebody who knows what they are talking about, you really know your stuff dude, nice!
That moment when you realize he has about $62,000 in balisongs and you can't even afford one. I'm jealous.
One day i hope to make enough money to have the spending cash to afford even one of these lmao
The moment you realized your only a worker bee
jon lipton why hope? Get of your ass and work for it
I buy mine from wish for like 20 dollars xD
Same
Unbelievable collection, Ive never seen anything like this. Thank you for sharing. I wish Benchmade would just bring back the 4x series, even if it were only for limited drops.
this remains one of my all time favorite go to videos. seriously i watch this like once a month lol
When you’re trying to go to sleep?
@@chilldudeace that's what I use it for. His voice is calming
no balisongs were flipped in the making of this video
Fr I was wondering this, if you have that many you have to be able to flip it a little bit
@Zak wouldn't doubt he has one for flipping at least
Your collection is VERY impressive! It's a shame you don't flip but I am glad that someone is keeping track of all of them and collecting pieces of history.
Genuinely fantastic collection. I couldn't bring myself to flip them but just admiring a collection like this should be enough for anyone with two brain cells. GREAT vid.
Great video, not only a chance to see some beautiful knives but also very informative. Thank you!
I love balisongs i only knew a few Benchmade models. This is very interesting seeing how they changed when time passes. I like to learn about new stuff when i get the chance! Great video!!
Holy crap man, thats a great collection! Do you have other Balisongs as well besides BM's? Would love to see them. You got my sub
+FlipZone Nope, nothing but BMs now. I might get back a Tach 3, as I was impressed with it. Or branch into customs
+Christopher Dugas Not really. I can do a few basic moves. Nothing fancy.
+1986mpv Whats the point of paying so much for them and not even learning to flip them?
They're pieces of Benchmade history, which is why I don't flip them. I have a CCC I practice my limited moveset with.
Damn! That's a very impressive Collection!
Sir you have the best collection of balisongs I have ever seen and you should consider starting to flip them
What a fantastic collection! You have museum pieces. Those gold class blades are something else.
Stunning Collection and Knowledge! Loved the Video
Amazing collection, and great source of information!
I would love a 4x with zen pins.
Every time you slid your finger across the blade I cringed a little.
wow. i usually have ccc's but im getting my first 51 morpho soon. wonderful collection.
When i see Balisong knifes and lots and lots and another,lots of types on today's market,hi tech materials and then only think,what we have before 10+ years when i start with flipping and learning some hard combos with many Chinese and other bad,crappy,falling a part knifes and get lucky if we find only one so so "good" Bali and we are so happy..You guys don't have a clue how lucky you R
Amazing collection. Would love to see it now
Would love to see an updated collection. Yours is the best I've seen bar none
Thanks for sharing! Very impressive collection. Some really beautiful knives. Thumbs up!
It takes a lot of dedication to get to this point, respect.
Very impressive collection, and your BM knowledge is equally impressive. I must say the matched set of DM09s is something I have never seen before.
Thank you for sharing! You have an amazing collection!
Great video and collection. I sold most of my Benchmades, but I do have a 42 military finish. Don't see too many of those.
you have so much knowledge on benchmade...great video
The majority of these were widely available on eBay back in the early 2000s i remember collecting the low end balisongs like jaguars and bear and co for under $30. Benchmades were sold for about 150-200 new and used ones would go from $75-$200. I was just outta high school a kid working a part time job so I never wanted to spend more then $50 on a balisong. Most of my small paycheck went to the movies on the weekend and dining the high school sweetheart. Wish I picked up a few of these. Always wanted the 49 after seeing the movie face off. Also fact fact u could buy almost any model back in 2000-2003 on Asian knives.com and knifezilla I remember seeing them very cheap not even sure if those knife sites still exist
Outstanding collection!!!! Thanks for sharing
Wow a true collection. Outstanding!
I don’t care you don’t flip, you have a very cool collection and you have gave me a lot of information about pretty much every 4x knife.
awesome collection. my fav's are the 47's and that rare 48.
absolutely amazing collection
I love the fact that at the end he says "And that's it." Like it's a minuscule collection of common Balisongs.
I was finally able to pick myself up a Benchmade balisong and honestly everything about it is so cool to me I'm glad I did. Not only use it made back in 1985 which means it's pre a Benchmade, Benchmade balisong, not only is it one of Benchmade very few Japanese made balisong, and not only did it Inspire the name butterfly knife, but the blade was hand-ground by the same man who made the swords for the Conan movies
Very nice collection you have there.
Great collection! Appreciate you sharing I'm and betting your collection has grown since the making of this video . It would be nice to see any new blades you aquire .
This is what butterfly knives are supposed to look like in my book. That classic silver skeletonized handle look is so menacing. Half of these boutique knives now days look like a fucking 20 dollar multi-tool. I'd be happy to get one of these one day to stand above my cheap ones
Really nice collection, man.
best balison video on UA-cam. i enjoy watching vids like these while i flip my brs barebones
Beautiful collection buddy.
That 43-401 is awesome
Very impressive collection and i personally,never so collection like this one...beautiful...you are a lucky guy for sure!!You need a money and a time and a lots of luck to find and collect so many nice knifes and i envy you,specially cos i love very much Balis but have only some Chinese s#@t in my country...but what to do!!Love your collection and good luck for trucking more nice Balis and everything best ! ! !
Amazing collection your so lucky.
Your collection is amazing! You a really lucky to have been able to aquire all of these. Also sucks that so many people hate your accent.
Thanks. It does take a certain amount of luck, especially in the beginning. You need to have funds ready for knife drops, and those are hard to anticipate coming from private sellers. In the later stages you get to know people and finding rare pieces gets easier, though no less expensive.
Amazing collection, great video!
I love your collection
Surprised I did not see a anodized 42A T latch in your collection I think they were a limited of 500 I had one stolen many years ago wish I still had it only recently did I get a great 42 I live close to th BM factory and have wandered in many times over the years seeing a few of these peices great collection by the way Amazing
Very impressive collection, thanks for sharing it. Minor correction: the 41 (and other 4x series) handles were both cast AND machined. You have to machine it after casting to get the flat smooth faces and accurate holes. If you didn't, the handle would have the rough texture that you see on the inside of the tang pin cups (not to mention that the tolerances would be abysmal). Also that bit about the mother of pearl cracking because of expansion isn't true. Mother of pearl is very commonly used as an inlay in wood (like in guitar fret boards) and wood expands and contracts far more than any metal due to absorbing and releasing humidity
I just got my first 42 ^_^ after years of looking!!
Amazing collection bro!!!
Insane video great collection, your Bali’s are very nice and it would be great to see some individual videos going a bit more into depth about the anatomy an history of each blade, maybe start of with the three DM Bali’s.
Just got my 63. Going to get all these someday.
Holy shit you have an amazing collection.
Nice collection!
Nothing like showing a collection on youtube then sitting back and waiting for.....BOOOOOOM!!!!! Great collection and I hate balisongs. (shhh....dont tell anybody!).
i like the black tanto one
This was 8 years ago…..Bro could probably trade the collection in for a Lambo by now
Can we please get an updated video all thos + the newer ones u hav added to ur collection
Nicest collection on youtube! Thanks for sharing!
Damn man beautiful balisongs!
Excellent collection 👍I do see some missing specimens though...
I subscribed at 01:05 bro. You are a repository of Benchmade balisong data and do due diligence in preparation. How this video isn't at 50,000 views is a mystery. I'm going to benge watch your channel 😁!
Oh my Gosh u don't flip ur balisongs?????!!?!?!!!!!??? I mean with a collection like that
+Erin The Pira ^
He probably just flips the new non collectible benchmades or other balisongs
Jake Richards I know, its a figurative expression
Andrew Lee it's a good investment. These knives go up in value I think. He is smart.
Andrew Lee I probably would not flip them either I would get a production model and flip that and use it while looking at these beauties
Greatest Bali video ever...even if there aren’t any Tachyons in it....
u are so talented
I feel like there's going to be a test :/
Lmao
hey bro ...i have a pacific cuttlery ...which was benchmades first name ...first run pat num4,364,174 balisong has the butterfly on blade ...stainless steel milled handles. beautiful except for the very tip on knife is broke...factory can put new tip on on it will just be shorter but still retain blade stampings...u need this for your collection...let me know if interested ....very rare
wobbiwobhunt
First off, you're full of shit. And fuck off with all of the "..." bullshit.
Flying Sky ...your mama didnt think so ....get a life ....
wobbiwobhunt
Forgot capitalization, as well of a lack of punctuation. Also, mom jokes? Come on.
wobbiwobhunt he’s right bro that was pretty cheap
Incredible collection. I thought I was hot stuff with a standard 42 new in the box😂
How the hell can you afford these?
It's called jobs.
I sell cocaine and cocaine accessories.
Nah, just prioritize. You don't have to be rich to have nice things.
Batangas Bitehandle don't be a smart ass I have a decent job and can't afford a single benchmade.
Chris Pressey you don't have $200 even after saving, I don't think you have a real job
1986mpv ( VERY late reply )
Dude you have that god tier collection of benchmade balis, I envy you greatly!
I've been watching this video for years and years...and I just now realized....I have 42-400 #83/125...!
I dug outa my toolbox an older bali song butterfly knife no numbers on it, black handle w/stainless holes in black get smaller towards blade, I cleaned it up and its incredible looking-I'm guessing 0ver 25 yrs old- trying to ID
awesome video
Im gonna rob this guy's personal favorite balisong, go out the house, flip it while recording and put it back into the collection with a note saying "thanks dood"
Thank you so much for sharing! Apparently there's a lot I don't know about Benchmade knives XD
Awesome collection man ! I have a benchmade balisong,I fucking love it,the design,sharpness and weight all are lit !!
Just started a day ago,had to cover the blade with tape 😂😂 !!
Nice dude! I have to admit, I am jealous :) ! Any new ones since this video?
Great video!
bruh i cant even afford one benchmade balisong wtf
Aidan Basquez haha
Nau34 that's what I'm saying wtf... here I am flipping a 10 dollar flea market knife.. like share the benchmade love ffs
Nau34 I can't even afford a freakin neck knife :/
pretty much of all of these are insane limited edition going around 2000+ dollars. I think it's great he has all of these. I'd be proud.
Yeah im abit sceptical....
Great knifes keep it up
Dang man, all these people are so jellous... nice collection btw :)
Jellous..................
Benchmade might contact u one day to do a historical video on their balisong history……wow
Damn this is such a dream collection😍😍😍
Is there such thing as holy trinity of knives in Balisongs? For example Chris Reeves, strider, hinderer. Looking for few balisongs to buy to keep for my collection
Those knives got more care than my childhood
Where is the collection? I only see a shop...
Hitgirl liked this video.
I’m wondering how you store all these
Do you just collect Benchmades? If not, you should make a video of your full collection.
Amazing 😍😍
Super cool!
Yep, I'm up to one. Almost up to par with you :). I'm surprised that you don't just have a 51 morpho.
Unlike some of the people in the comment section, I envy your collection of balisongs. I'm not going to complain or say that you sound like a snob and are showing off these knives to brag. I imagine you have a job which is how you are able to buy all these knives and that it took a while to get all of them. By the way great collection.
Where do you find the limited-edition-knifes when they come out?
HDGameplayer14 I think he's a grave robber mostly from newspaper clippings & toenail clippings. Also, he's possibly a Dole trust fund holder with a lucky knack for winning scratch tickets. I dunno. Perhaps he lives across the street from the factory ? Gets friendly at coffee breaks and burritos. Or he's a robot absolutely for sure so help me God!!!!!! Woo!
When did u buy the 1st one ?? Awesome collection
i must have watched this 10 times, im new to the bali world and of course i would love a 42 may i ask could you guide me on where i might be able to locate one sir.....BTW, awesome collection!!
Go look on JerzeeDevil forums they sell used balisongs there, its known for that :) sadly the 4x series is not being produced by benchmade anymore :(.
I’m selling one right now
I'm sitting here, with my most expensive knife being my Bradley Kimura 7, I'm just like "He's touching those knives with his fingers????????? Fuck i'd be wearing 9 pairs of gloves so I get NO finger oil or anything on em..." #paranoid.. #knifescrub
Don't worry. They get plenty of TLC.
i mean kimuras usually get discontinued so you actually have a special knife too :)
1986mpv can you swap theblades
Reality Reptiles what's the point of having something you're worried about touching. People wear out $200 knives and buy new ones all of the time. I guess collecting is different though.
Reality Reptiles I'm sitting here with a brs barebones :)