ENGWE EP-2 e-bike. Follow Up Review And Upgrades.
Вставка
- Опубліковано 5 сер 2024
- The Engwe EP-2 500w comes out of the box at great value. Very usable as is, and will give plenty of pleasure to the new owner. I decided to upgrade a few components for personal preference, which cost very little to do, and made a great bike even better. This review, after several months ownership, only strengthens my decision on buying this model. The price is difficult to beat for what you get. A 500w motor with a 48v 12.5ah battery, for less than something of lower spec. Engwe appear to have done a good job with this, there's even a 750w version available now too. Ok, you can't compare it to top of the range e-bikes. but for a cheap way to get into e-bikes, you can't go wrong.
Tyre liners now fitted for that extra protection.
Check out my channel to see more info on the EP-2.
Links below to buy the bike and other upgrades,
Bicycle accessories
s.click.aliexpress.com/e/_9JBqCY
Link to purchase Engwe EP-2.
s.click.aliexpress.com/e/_AdKiF5
Engwe Official Store.
s.click.aliexpress.com/e/_dTS...
Freewheel and tool
s.click.aliexpress.com/e/_d7A...
Zoom Xtech HB100 calipers.
s.click.aliexpress.com/e/_dVg...
Zoom suspension seat post
s.click.aliexpress.com/e/_A746K7
360° Bar end mirrors
s.click.aliexpress.com/e/_ACZskE
Rear Rack bag.
s.click.aliexpress.com/e/_Dls...
20x4.0 Tyres
s.click.aliexpress.com/e/_dSi...
GoPro equipment
s.click.aliexpress.com/e/_d9F...
Rechargeable air pump
s.click.aliexpress.com/e/_9RhXCp
DISCLAIMER: This video and/or description contains affiliate links, which means that if you purchase one of the product links, I’ll receive a small commission which goes towards helping me with producing better content. - Авто та транспорт
I've had a Engwe for a couple of months, it's brilliant. 🙂 🚲
Good choice, certainly value for money.
I've had this since 21 September and still going strong. New cables and breaks have been fitted and it's so easy to do , I've done 4 rear punctures none in the front tire so far . . I've been on the road alot so I avoid prickles or thorns as much as possible now. Gunu get gluep when I get new tires for more off roading as well,. Overall this bike rocks. Needs that lube for the chain every so often job done. I'm one happy rider 😄👍👍👍👍👍👍👍
Punctures can be a real pain. Not had one since I Gooped, but I might just be lucky.
hello and thank you for all your videos on this wonderful ebike. I just ordered a 750w and would be sure to post videos as well. The improvements you have made seem very interesting to me and I think I will be inspired by them. cordially.
Glad to be of help.
Hi, I have just put a bike on order after watching your channel, it,s gona be fun to ride.
You wont be disappointed. Great value.
I love mine. These videos are a good representation of what you get.
I payed 1100 and I think its still worth it even at that price. This thing still has its original seat and pedals the only thing new is flued brakes and 2 puncture fixes. So far so good all I need is chain and gear lube and my bike has been faultless since September. Amazing ebike. 👍
They really are good value for money.
@@MidlandBulletRiders definitely 👍
A little tip you might need one day, If your headstock develops a slight looseness, fold away the bars, undo the allen bolt to remove the stem, under is a black collar with slots, unscrew this and under there is the large nut you need to tighten up. Reverse to reassemble. Five minute job.
Good tip. I'll bare it in mind.
I had a rear puncture on mine a few months back, but I managed to get some of the Kenda 20 x 4.125 Heavy Duty inner tubes and they are a hell of a lot thicker and haven't had a puncture since.
Regarding the brakes, the stock calipers are complete garbage. I was almost killed a few days ago because the brakes failed to work and I overshot a junction. Luckily it was late at night and there were no cars around, but it could have been deadly. The stock calipers are a cheap chinese brand that I'd never heard of, but I replaced them with some Tektro Novelas from my other bike and even that's a huge improvement. I was going to get the Zoom Xtech HB100 calipers, but I'd read that they too don't last very long. Whilst the Novelas don't have a great reputation either I'd already had them for 7 years and had no issues with them.
Thanks for the videos.
I have heard of brake fail before. Upgrading is probably a good idea.
Here's a picture of my bike with orange panniers. i.imgur.com/sBlceDG.jpg
@@TeamCGS2005 Looks nice in orange, and the panniers really finish it off.
@@MidlandBulletRiders Got to say a big thank you to you because it was because of you that I took the plunge and bought the bike in the first place. Had no regrets whatsoever :)
@@TeamCGS2005 Glad my videos helped.
Just bougth 1 week ago and im desappoint with the range,am i the only 1 who only can do between 30-35km range on 5th gear
Can anyone type your exact settingS for p1 to p26 here for ep2 pro, 750w PLEASE and how to save them permanently. Thanks
i tried to turn the key several times but i dont find the right movement to pull out the battery so i thought theres something else that hold the battery and i was in the wrong hole -.-
Don't put anything in there other than the charging cable. Turning the key will retract the locking pin, seen behind the folding latch.
I just bought mine!! Which diameter for the Zoom suspension? 27 or 31mm? Thanks
31.6 and a 33.9 adaptor. ua-cam.com/video/0G8qMN57A7s/v-deo.html
I have the same bike, I notice it needs a higher gear as when in speed 5 on the flats, I can't get any resistance peddling. Does your sprocket upgrade improve the pedal resistance in speed 5? Thanks. 😀
Yes, makes a big difference.
@@MidlandBulletRiders Oh then please do a little tutorial on this, I've been peddling like a loon over 9 months, you saying there's a cure? I've no idea what to buy/install.. 😩
Hi, please what is the measurement of the FreeWheel of Engew ep 2 upgrades you bought on aliexpress?
11/28
Wow, that looks so similar to the Lectric XP I just bought.
Yes they probably do share some components.
@@MidlandBulletRidersA lot of them are the same. I do like the mag wheels on yours! Those look great! 👍🏻
They appear pretty robust too, plus no having to check for loose spokes.
@@MidlandBulletRiders This is true.
You should throw some reflective stickers on there. It would look pretty cool during those night rides. In the states, we have these hexagon shaped stickers that look pretty cool at night. Not sure how much night riding you do. I plan to do a lot here in the Summer, next year.
where did you purchase the Lectric xp?
Do you think an upgrade with a bafang 750w rear wheel assembled will be good on this engwe ep2?
Possible. But you would need to change the controller and display too.
I'm corious . how many kilometers have you done on this bike? Is that version with 500w or 750w? I probably buy engwe with 750w motor, but i'm not sure on 100%
I did reset the mileage by accident so not totally sure, but must be close to 1000 now. This is the 500.
hey mr.midland ....i think i got a short circuit on my new engwe ep2 pro ....im a beginner in ebikes ....and i was searching a way to unlock the battery out of the case and was with my key in a lil whole who was the dc for the ac dc .....and there was a lil boom then after some minutes i plugged it back on and triied the lcd nothing happened .....i hope the controller is not damaged now beside the battery
:( or something else
Try to recharge the battery again. Sounds like the BMS in the battery has shut down to protect it. Recharging can reset it.
@@MidlandBulletRiders i tried but the led of the ac/dc shoes green and the battery was not full at arriving...so i think i damaged the battery 😪
Never mind the upgrades, mines is so dirty, how do you clean it. Any tips to avoid getting the electric parts wet.
I just use a bucket and sponge, and take care around where it folds, that's the main electrical area. I wouldn't recommend using a hose.
Take a damp cloth and wipe it down
Great after sales tips! What is the size of the seat post, 27 or 31?
The seat post that comes with the bike is 34mm. the frame tube is 36mm, so adaptors are needed. ua-cam.com/video/0G8qMN57A7s/v-deo.html
@@MidlandBulletRiders Excellent! I have taken your advice, and ordered flywheel, brakes and a new seatpost.
Do you think it will be possible to upgrade the brushles motor to 1000W later?
@@christerjohanzzon
Check out a channel by a guy called ANDY KIRBY. He has done some very cool mods on an Engwe EP2 pro 750. Grey color. He put BMX handlebars on it. A brown leather selle royal saddle with super suspension. And was talking about upgrading the motor and controller battery to handle 1500w. To give the bike almost motorbike power.
He is the MAN to contact and talk to if you want to upgrade the motor on your EP2.
do you have a link for the bag on the rear thanks
Try that one. Old link seems broken now. s.click.aliexpress.com/e/_DlsFT4j
Any advise where to find some new wheel reflectors ?
I took out the stock reflectors and stuck on reflective blue rim tape. Looks quite sharp
Hey.. whats the diameter of the seat post ??.. great video !!
The frame is 36. The original seat post is 34. Zoom is 31.6.
hello I'm about to buy this bike, could you tell me its strengths and weaknesses? Did you have any problems? Sorry but I don't speak English and I can't understand your videos well. Thanks
Have you tried turning the video subtitles on in your language? No problems so far. Great value, strong motor. You will enjoy riding it I am sure.
@@MidlandBulletRiders i will try and hope i can understand you. To unlock the maximum speed which parameter should I change? Thanks a lot for your answers.
Just wondering if you had to pay extra because of customs ?
No, nothing more to pay. Seller pays all duties and tax.
@@MidlandBulletRiders awsome to know thank you ^^ just one question i'm 1m85 in height would this be a problem with the bike ?
Are the tires tubeless? I am debating buying tire liners for mine.
No they are not tubeless. Still thinking of tire liners, although not had a puncture since using Goop.
@@MidlandBulletRiders I went ahead and ordered the liners. You’re channel is great by the way.
Hi, what freewheel removal tool did you use?
Just a standard removal tool, available at many places.
@@MidlandBulletRiders From an AP50 to a few 175's to wishing for an RD400 but to a cx500 for courier work to a vmax onto a Hayabusa then an R1 to a Tuono, 2 Triumphs a 954 that i rebuilt from the ground up, onto a vfr (2019) to looking for a zzr to looking for a standard removal tool for an ebike freewheel tool that actually fits. Never mind I'll just grind the latest edition down till it does. BTW, just starting to look at your vids away from the ep2 Pro. At first I thought you have to have been a biker to enjoy the ebike thing (no lid). Now I know you are, of sorts... Aren't we all, as generations go by... Keep it up. 👍
I didn't know the difference between a cassette and a freewheel and cassettes can have numerous spline patterns whereas the latter has but one. On changing the freewheel however I still find the pedals cycle too slowly for the wheel cycle or maybe I'm simply doing 24mph everywhere 🚀. Looking to reduce the cog further. I do though use it to get to work and it's a strong capable ride. Not a motorbike.
How high does the saddle rise?
It has a long seat post, up to around 127cm
Cable/ mechanical disc brakes not hydrolic..
Thanks for the info. Good to know the tires suck getting a bike that is similar and there Facebook page was formally engwe so I'd assume it's the same company who use to make engwe rebranded to GESHENG. Quality most likely will be the same
Max speed only elettrica please
Depends on your weight and conditions, but around 37kmh
i dont trust those hand tight seatpost clamps, kids can easily steel your suspention post and i for one replace it with a bolt tightened clamp so it cant get stolen.
I agree, but never leave mine unattended.
cant understand why youve had punchers on this bike.ive had one for over a year and never had a puncher even riding on rough glassy footpaths.
Not to be a know it all but those are actually cable operated mechanical disc brakes. If they were hydraulic there would be hoses going to them instead of cables
PLEASE , PLEASE STOP UPLOAD YOUR VIDEO , IT COST ME ALOT MONEY HAHAHAHA :)
Money well spent though.