Here’s a New Way to Enjoy Smoked Food
Вставка
- Опубліковано 21 вер 2021
- Clean, sleek and convenient! I found out about a whole new way to enjoy smoked food. It’s Bradley’s new smoker the P-10, built for one thing: smoking in a unique way. I’m talking about a real SET AND FORGET SMOKER with 4+ Racks and it smokes food up to 10 hours with no refill. And definitely it’s the coolest looking smoker that I’ve seen with professional grade stainless steel body.
I’ve been talking with the folks at Bradley. Seems that they have come up with a bold, pioneering, new way to smoke, with cleaner and great taste! I wanna believe it. But is it a good idea? Let's prove it. They wanna convince me. But I'm not going to roll-over.
#recipes #Smoker #BradleySmoker #SmokedFood #OutdoorCooking #Grill
➡ About M.O.T.G
One of the most recognizable Grilling and Kitchen TV Pitchmen in the World, Marc Gill is going unplugged and at home, doing what he loves most Barbecuing, Smoking, Grilling, Braising, Su Vide, I mean cooking and feeding family and friends.
His hectic schedule has him reviewing, testing and scripting presentations for products which are sent to him from all over the Globe. These products are intended to be used in an Infomercial, a Commercial or featured on Live Shopping TV.
➡ Follow Marc
Facebook: / marcsonthegrill
➡ Contact Marc
Interested in having your product reviewed? Reach out and let is know what you got!
marcsonthegrill@gmail.com
What about cold smoking? Bradley use to have a smoker with a separate attachment for cold smoking that I used quite often. Don't see a way to do that on this one. My Bradley actually broke (something with the electronics), so I currently don't have a smoker....but have been looking forward to getting a new one in the near future. Getting another Bradley worries me after the electronics fail of my last one. Looks good though. Intrested in seeing how it performs!
Hi nice commercial about that Razer sharp knife
Hello from Canada, did you have any issues with the wheel moving the pucks like only burning 2 instead of all 6 let's say. Just wondering
Hi Marc,
Troy from Hiram, Ohio. I have been smoking meats since the age of 12. Such a passion for me...brisket, shoulders, pork bellies, pizzas, cheeses, nuts, domino's, cheese balls, yep cheese balls. I just bought a Pitt Boss Pro pellet smoker a few months ago.
I still use my Barell smoker (chunk wood) as well. I have created 50 flavors of jerky and sausage over the years. Let's exchange ideas sometime.
Be blessed
Troy Wallick
Oldè World Foods
From Natural Bridge VA. I have a Master Built smoker, a Blackstone and a Charbroil
She's a beauty. Great video Marc
I have a master built but I am super jealous 😢😢😢
The final in an email chain of disappointment with Bradley
After applying a lubricant/rust dissolver to the screw I was unable to remove it. The screw slots gave out. Now the screw head must be ground off. At this point I do not have enough screws to fully reassemble the bisquette heater.
When I spoke to Olev and asked him what the dimensions were for those screws his answer was that he would have to research that for me, and he would let me know. I have not heard from him. The local big box and hardware stores carry nothing identical. The choices there are either slightly too large or too small, and in that small size only Imperial is available here. I think the dimensions must be Metric and I need those dimensions in order to purchase replacements online.
I am going to order stainless steel screws and replace all the rusted screws in the P10, which is almost all of them. Please, at least give me the correct screw dimensions.
In the picture below you can see that the bracket holding the heating wires is badly corroded. I understand you will not replace the entire heater assembly, but would you at least replace that part?
I am going to fully disassemble the bisquette heater, grind off all the rust, and repaint it with a heat tolerant rust resistant coating. I’m also going to examine the drip pan to try and understand how drippings got inside that heater in the first place since it is unreasonable to have to disassemble that part of the P10 to clean up what should not be there.
That concludes my request for help, and my information for you regarding repair of this unit.
MESSAGE FROM A VERY DISSAPOINTED CUSTOMER
I have used Bradley smokers for over 40 years. My first was an aluminum model that eventually had to be replaced. I’ve purchased several to give as gifts to others. I am as loyal and long term a customer as Bradley could hope to have.
The treatment I have received from support has been unpleasant. I’ve been accused of mistreating my P10 by support, then later had Olev confirm the screws were a bad choice that will be replaced. Now I’ve been accused of not properly caring for my P10 because I did not disassemble the heater to clean it. That procedure is not called for in your manual and should not be needed.
I will never again purchase a product from Bradley. Not because my P10 has problems, but because Bradley support tries to blame the product problems on me, and refuses to acknowledge and replace that which is faulty.
My entire interaction with Bradley has been fully documented in pictures and email. Take a moment to examine my UA-cam page and the videos I have there. They are detailed and have good reviews. I will be adding a detailed review of my experience with the P10, showing the rust throughout, the magnets sticking to what is claimed to be stainless steel, and the emails from support trying to blame me for those defects. Although my videos only get a up to 40,000 views, there is not much on UA-cam discussing the P10, so I expect my video will be easy to find if people research the P10 prior to purchase.
Because you are not going to correct the deficiencies in your product I am going to alert prospective customers to them. Most disturbing to me is that Bradley intends to keep shipping P10s with steel screws until November when the first run of P10s with stainless screws is expected. Are you planning to send everyone a set of new screws and tell them to replace them. Such would be a good policy for those of us who already have our P10s, but shipping out units with steel screws when you could easily procure and replace the screws in your inventory units is just unethical.
Like rust, the rot in a company comes from the top and works its way in. It saddens me that Wade Bradley has so little interest in his customers that he has chosen not to engage with me when I asked courteously that he do so. Leaders who shield themselves from disappointed customers, hide behind low tier technical support and refuse to acknowledge product deficiencies eventually pay the price. Word gets out, sales drop off and they no long have a company to lead. Good luck Wade, that is where you are taking Bradley.
Bendrix Bailey
Bendrix Bailey - UA-cam
My guiding service - lots of client contact
Northeast Woodlands Guiding
Recteq Bull & Bullseye 🎯 & Blackstone
haha, this looks like it will do as good as the other ones...........pass........1000 dollars - for this small thing and you can clearly see its not solid - look at the unit moving when you open and close the doors - why put a 1000 dollars on something so flimsy and small............you can definitely get a larger sturdier upright smoker unit for 1000.00 dollars
I'm sorry Mark, This is a lazy man's smoker. No fun. No sense of accomplishment. Sorry😎✌️