@@cocohmarco578 doing my car for the first time ever actually painting any car I've already prepped it sanded it and primed it all I have to do now is wrapped align the whole car thank you for the video from East New York Brooklyn God bless my brother
One small extra tip, if you have to paint perpendicular on the roof for example, make sure you doing it when the bottle is full, cause otherwise you may miss paint while the bottle is inclined as the inner pistol won’t be able to aspire the paint.
Congratulations, sir. Your tutorial on the specific spray painting techniques required to achieve an even, professional finish when applying Raptor paint is invaluable. Most of the videos I have watched fail to address the vital painting issues which you discuss in detail. I now understand why so many video presenters say that, while they are satisfied with the overall end result, there is one area which did not come out exactly right. Obviously, you can not expect uniformly satisfactory results without employing consistent (and correct) application techniques. Thanks again, Marco, I would quite likely have botched my Raptor paint job for8 without your video advice. Now I feel like I have a better chance of doing it right. . . .
I must say that I’ve watched multiple videos on this topic where they show the actual application of it while explaining some things, but although you did not show the application, what you explained was very informative! I learned tips that I had not heard on the other videos. Thank you for posting this!
I must have watched this video dozens of times in preparation to raptor line my 01 Yukon. Out of the many videos out there on raptor which I probably watched them all, this is by far the absolute best informative video on raptor liner. I did exactly what you said especially on ters on distance and keeping the gun perpendicular to the panels. My truck came out damn good. You brother, have the best video on this topic and I will definitely recommend it to everyone I run into interested in raptor lining their vehicle. Cheers!
How long did it take you to do the car, and how many coats did you do? He says take the masking tape off after 30 minutes, but I've seen people do 3 coats with an hour to dry in between sprays
@@Johnny-mo9df @Johnny Prep took like a week maybe week and a half. Paint day - I did this in Arizona, it's a tad warm here lol, a sunny day in the dead of the morning with minimal wind. Took me about 2.5 hrs to paint and I waited like 15 min between coats bc of how warm it is here. I saw another vid about spraying raptor in hot climates and they said at 30 min that bitch is dry in 90°+ weather. 1st coat light, 2nd coat heavy, 3rd coat heavish and last coat was light and mostly for texture. I would recommend 3 kits for a big SUV, I used 2 and will need to touch up the passenger side rear door a bit. Even with like 2 more bottles would do. It's been 3 mo and it still looks fucking pristine! Did mine in white and I fucking love it. I wanted something that would be easy to do, raptor is so flexible I was able to spray outside, with heat, and wind picked up towards the end. 100% recommend and follow this dudes instructions in the vid.
@@promptengineered I’m in florida, been prepping for the past few days and realized after taping off my garage that i might not have the space i need to spray. so i’ll probably pull the car outside and spray in the morning. when you say “1st coat light” did you still cover the entire vehicle? or was there some areas that got filled in more the 2nd and 3rd coats. also did you start on the roof and work your way down?
@@Johnny-mo9df light in the sense that you can clearly see primer still, lots of "holes" but I used it as more of a "test run" to see the texture coming out, how far back to stand, my fan speed etc. By the time you are done with that coat you will have a pretty good idea of how to spray and that's where you go heavy on the second coat.
Definitely the best video I have seen on applying the Raptor product. I will be spraying my brother in law's Nissan Navara ute.I will view several more times before I attempt this job. You are a great teacher.
Amazing video.. I am new to Raptor and this answered so many questions... thank you so very much for this video... I cannot stress how good this video is... I want to spray raptor with very little texture because I want a smoother finish without it being so aggressive in texture but still give me the tough durable finish.. You answered this perfectly... Thank you my friend....
Best tutorial on Raptor . I've been shooting Raptor since the 90's. Today 2023 April I'm using the turntable kit that comes with pre measured Hardner,and pre measured Tint. Extremely Smart move on Raptors part to do pre measured kits. This is why I liked them in the 90's . They had the measurements built into the Spray bottle, simple intelligent, product!
Fantastic! That was really a lot of useful information, I'll start again from the beginning and then run to my car and spray my cans :) Thank you so much!
Excellent information. Thank you. My biggest take away - be sure I can sweep consistently for hours at a time. Will get out my hand weights in preparation for a summer application to the big van!
Wow. This video is just what I needed to see. Thank you for posting. I am going to save this video so that I can watch it again before I respray my truck bed. I previously used another brand bed liner kit that I brushed on. I don't like how it turned out so I am going to redo it with the Raptor liner kit.
Very, very good video! This is absolutely the best video I have seen as far as application. The final top coat will make or break the final appearance! Keep a distance.
You should make a video of the end result man, I’m also going to spray my 2000 Toyota Tundra in thinking about a toned down Olive green and bumpers black as well as the fender Flares.
I watched every video on youtube you are the best i seen ..i know the others didnt show it but waiting to take tape off the next day i know they not get perfect paint lines i know this now i hope to see more video you may have more tips i just getting started with Raptor an i feel like a pro first time cause i watched this video
This is so incredibly helpful! I've watched many videos of Raptor application searching for a lot of the details that you provided in this video. Thank you so much for making this video! So many of my questions have been answered.
Might as well I postpone spraying raptor on my rig, i don't think anyone in my area has the product's know-how like this guy in this video.. I think i better wait until there's someone capable of doing it properly, not gonna waste my time.. kudos to the brief explanation Marco!
Awesome thanks! I made notes of all the main points should anyone else find useful: 180 grit to abrade whole vehicle Don't texture door jams because seal can fail 3:1 paint to hardener in measuring cup For the hlvp base coat add 10-15% thinner hlvp base coat 1.5, 1.8 or 2.0 tip texture coat. standard schutz gun, 3 to 3.5 bars, distance about 45cm practice first varying distance and air pressure to get desired texture do full horizontal strips around whole vehicle spray direct onto edges always keep perpendicular keep distance always the same, even on the windscreen pillars keep consistent hand speed keep stripes close together to avoid tiger striping every 2 bottles (litre) switch to thinner only bottle to clean gun. put into thinner and put on full air pressure to clean. mix each bottle just before you use it. Do not mix all bottles at the same time. This is because the viscosity changes as the paint ages. coarse: lower pressure to 3 bars and spray at 40cm fine: pressure to 4.5-5 bars and spray at 60cm also may add 5% thinner to give finer texture while spraying keep trigger pressed continuously if get some small inconsistencies in texture, use some twisted and folded over masking tape to dab and fix the inconsistencies keep finished vehicle away from water for one week
Thank you for this video my golf cart came out perfect using this tech THANKS for this awesome video i took the tape off the first 30 mins also like you said its perfect again THANKS
Great video, you explained everything very well.very easy to understand. You gave excellent tips. Very important tips that I appreciate very much. Thank you sir. Please,have a good day.
Thank you very much for the useful tips! This is the best explanation I've seen. Can I ask you two simple questions? 1. If there are spots where I sanded down the original paint to the bare steel, do I have to paint it with some primer, or can I spray the Raptor over the bare metal too? 2. Is it bad if I wait few hours, maybe a day between the Raptor coats? I'm thinking of spraying my totally disassembled body parts one by one, then wait till I can touch them, assemble the car, and do the texturing spraying. Greetings from Hungary!
21 days huh? . Funny story. I sprayed mine 7 yrs ago. It baked in the hot sun for the whole day. That evening we had a pea size hail storm come in. Didn't do anything to the truck. Lol. Painting my truck tomorrow needed a fresh review. Thanks island man.
Great guide, thank you for taking the time to do it in English, apart from the 180 grit preparation reference, do you have a video? Also is there any additional advice regarding coating plastic bumpers or body panels, lastly what are your thoughts on roller or roller and brush application?
Hey buddy thanks for the excellent tips! Extremely informative video. And when I raptor my box truck I will definitely follow your very wise well thought out tips!
Thanks for such an awesome resource! I've been considering trying this on my 2002 RAM 1500, with the factory paint having looked like trash ever since I got it 3 years ago. Seems like something I should be able to do at home, which sounds awesome! After the 21-day cure time, is it safe to take a raptor-lined vehicle through a car wash? Mine tends to get pretty dirty after I get home from the trails, haha. Also, what's the best way to color match Raptor to a similar gray? I think I recall seeing something about buying tint on their website? And last question, is there a specific type of primer I should be looking for, or is it better to apply the Raptor directly to the body after surface prep is complete? Thanks again!
Great video,thank you… I’ve started painting my Hj47 troopy with this but thinned out 25% to get it flatter and 3-4 coats… I’ve being toying shooting kbs clear over. It..what would be the best prep now my panels have been sitting for months with raptor fully cured????? Cheers From Dictator dans Australia
@@Tom-wp3ev yes just on some small things and I rushed it..pretty much the gloss just highlights the roughness…🤣…so I won’t be shooting that on exterior body work…but that kbs clear is hard as F@rk!!🤙🤙
Great! Many of my questions were answered by watching this! One question, can this be used inside the vehicle or will off gas be a problem later for people using the vehicle?
Thank you Marco, I really value your video, instructions, and advice. Good job my Brother! I’m preparing to Raptor a Grand Cherokee. I’m thinking orange with black. Is it possible to get a nice line where both colors meet?
Great tutorial but one art is confusing. The rubber door “gasket” seals easily against the smooth factory paint. It seems spraying Bedliner introduces a rough textured finish which the “gasket” does seal as easily…
It's hard to get all the stripes out with dust coats. So why can't a person just spray it all heavy? Seems to be alot smoother and I like the way it looks?
I am impressed with your informative video, EXCELLENT job, no doubt. My suggestion, if you could show the painting technic in live video, it'll be much better for us to know and see the result, Again greatly appreciated your tutorial video. Keep up the good job. Cheers.
This is a really good video, excellent advice, very clear, and your English is great - well done! Best guide to using Raptor paint that I’ve seen 👍
Thanks man
@@cocohmarco578 doing my car for the first time ever actually painting any car I've already prepped it sanded it and primed it all I have to do now is wrapped align the whole car thank you for the video from East New York Brooklyn God bless my brother
I agree with Mr_Beagle! Everything I needed answered in one video!
@@Wankelrtry522 hope it helps brother...
@@gilcruz7869 God bless
One small extra tip, if you have to paint perpendicular on the roof for example, make sure you doing it when the bottle is full, cause otherwise you may miss paint while the bottle is inclined as the inner pistol won’t be able to aspire the paint.
Always do it first. It's raptor. What could go wrong. 3 gallons do you think that's enough?
Congratulations, sir. Your tutorial on the specific spray painting techniques required to achieve an even, professional finish when applying Raptor paint is invaluable. Most of the videos I have watched fail to address the vital painting issues which you discuss in detail. I now understand why so many video presenters say that, while they are satisfied with the overall end result, there is one area which did not come out exactly right. Obviously, you can not expect uniformly satisfactory results without employing consistent (and correct) application techniques.
Thanks again, Marco, I would quite likely have botched my Raptor paint job for8 without your video advice. Now I feel like I have a better chance of doing it right. . . .
Bullshit.
It's raptor. What could go wrong?. Lol
It's the best tutorial I have ever seen! Concise, insightful, and well structured. no BS...Congrats!
I must say that I’ve watched multiple videos on this topic where they show the actual application of it while explaining some things, but although you did not show the application, what you explained was very informative! I learned tips that I had not heard on the other videos. Thank you for posting this!
I must have watched this video dozens of times in preparation to raptor line my 01 Yukon. Out of the many videos out there on raptor which I probably watched them all, this is by far the absolute best informative video on raptor liner. I did exactly what you said especially on ters on distance and keeping the gun perpendicular to the panels. My truck came out damn good. You brother, have the best video on this topic and I will definitely recommend it to everyone I run into interested in raptor lining their vehicle. Cheers!
How long did it take you to do the car, and how many coats did you do? He says take the masking tape off after 30 minutes, but I've seen people do 3 coats with an hour to dry in between sprays
@@Johnny-mo9df @Johnny Prep took like a week maybe week and a half. Paint day - I did this in Arizona, it's a tad warm here lol, a sunny day in the dead of the morning with minimal wind. Took me about 2.5 hrs to paint and I waited like 15 min between coats bc of how warm it is here. I saw another vid about spraying raptor in hot climates and they said at 30 min that bitch is dry in 90°+ weather. 1st coat light, 2nd coat heavy, 3rd coat heavish and last coat was light and mostly for texture. I would recommend 3 kits for a big SUV, I used 2 and will need to touch up the passenger side rear door a bit. Even with like 2 more bottles would do. It's been 3 mo and it still looks fucking pristine! Did mine in white and I fucking love it. I wanted something that would be easy to do, raptor is so flexible I was able to spray outside, with heat, and wind picked up towards the end. 100% recommend and follow this dudes instructions in the vid.
Oh and 60PSI. *chefs kiss* perfect texture to my liking. Less chunky but still very textured
@@promptengineered I’m in florida, been prepping for the past few days and realized after taping off my garage that i might not have the space i need to spray. so i’ll probably pull the car outside and spray in the morning. when you say “1st coat light” did you still cover the entire vehicle? or was there some areas that got filled in more the 2nd and 3rd coats. also did you start on the roof and work your way down?
@@Johnny-mo9df light in the sense that you can clearly see primer still, lots of "holes" but I used it as more of a "test run" to see the texture coming out, how far back to stand, my fan speed etc. By the time you are done with that coat you will have a pretty good idea of how to spray and that's where you go heavy on the second coat.
Definitely the best video I have seen on applying the Raptor product. I will be spraying my brother in law's Nissan Navara ute.I will view several more times before I attempt this job. You are a great teacher.
This is by far the best video I have seen on Raptor. Thank you!!!!!
Well done sir. Thank you for your advice. Raptor should have this video on their official website.
Definately a must watch!
Amazing video.. I am new to Raptor and this answered so many questions... thank you so very much for this video... I cannot stress how good this video is... I want to spray raptor with very little texture because I want a smoother finish without it being so aggressive in texture but still give me the tough durable finish.. You answered this perfectly... Thank you my friend....
Best tutorial on Raptor . I've been shooting Raptor since the 90's. Today 2023 April I'm using the turntable kit that comes with pre measured Hardner,and pre measured Tint.
Extremely Smart move on Raptors part to do pre measured kits.
This is why I liked them in the 90's . They had the measurements built into the Spray bottle, simple intelligent, product!
Agree
Fantastic! That was really a lot of useful information, I'll start again from the beginning and then run to my car and spray my cans :) Thank you so much!
This is the absolute best guide for raptor liner on youtube. Thank you.
Glad it helped
OMG!!! THANK YOU SIR! THIS VIDEO WILL HELP ME ALOT ON ACHIVING A BEAUTIFUL TEXTURE.. THANK YOU SO MUCH..👍👍
Excellent information. Thank you. My biggest take away - be sure I can sweep consistently for hours at a time. Will get out my hand weights in preparation for a summer application to the big van!
THIS IS THE BEST VIDEO ABOUT RAPTOR EVER!!!
This was the best video I’ve seen about raptor liner. Thank you.
This is the best Raptor video on UA-cam. Great job!
Thanks mate...
Thank you so much for a great video and advise! Applying Raptor liner tomorrow and so glad I watched this first!
Hands down best raptor liner info/how to I have ever watched.
Thanks
Wow. This video is just what I needed to see. Thank you for posting. I am going to save this video so that I can watch it again before I respray my truck bed. I previously used another brand bed liner kit that I brushed on. I don't like how it turned out so I am going to redo it with the Raptor liner kit.
Very, very good video! This is absolutely the best video I have seen as far as application. The final top coat will make or break the final appearance! Keep a distance.
this is the absolute best explanation, tutorial and advice I have ever seen on you tube.....Thank you for this video
Thanks
Thank you for making this video, very good tips, and will help me when i coat my van
You should make a video of the end result man, I’m also going to spray my 2000 Toyota Tundra in thinking about a toned down Olive green and bumpers black as well as the fender Flares.
Just did my 2019 Ram Rebel. It came out great, thanks to your Excellent pointers! This video answered questions I hadn't even thought of!
No other raptor videos are this good, excellent job my guy, from USA.
I appreciate that!
This is the best video on raptor on youtube! Big THANKS!
I watched every video on youtube you are the best i seen ..i know the others didnt show it but waiting to take tape off the next day i know they not get perfect paint lines i know this now i hope to see more video you may have more tips i just getting started with Raptor an i feel like a pro first time cause i watched this video
EXCELLENT - answered all my questions without me even asking 😮 🙌❤
Glad it was helpful!
Truly the best video i've seen on this!! Thank you!!
🙏🙏🙏
This is so incredibly helpful! I've watched many videos of Raptor application searching for a lot of the details that you provided in this video. Thank you so much for making this video! So many of my questions have been answered.
Glad it was helpful!
Thanks for the great tips the best so far
Might as well I postpone spraying raptor on my rig, i don't think anyone in my area has the product's know-how like this guy in this video.. I think i better wait until there's someone capable of doing it properly, not gonna waste my time.. kudos to the brief explanation Marco!
Hope it helps
Truly the best video ie seen on this!!!Thank you!
Thanks
Fantastic idea you are so professional i like people who suggest and gives a good idea to the other really appreciate you thank you so much
Excellent video, great tips and advice. Thank you.
Awesome thanks! I made notes of all the main points should anyone else find useful:
180 grit to abrade whole vehicle
Don't texture door jams because seal can fail
3:1 paint to hardener in measuring cup
For the hlvp base coat add 10-15% thinner
hlvp base coat 1.5, 1.8 or 2.0 tip
texture coat. standard schutz gun, 3 to 3.5 bars, distance about 45cm
practice first varying distance and air pressure to get desired texture
do full horizontal strips around whole vehicle
spray direct onto edges
always keep perpendicular
keep distance always the same, even on the windscreen pillars
keep consistent hand speed
keep stripes close together to avoid tiger striping
every 2 bottles (litre) switch to thinner only bottle to clean gun. put into thinner and put on full air pressure to clean.
mix each bottle just before you use it. Do not mix all bottles at the same time. This is because the viscosity changes as the paint ages.
coarse: lower pressure to 3 bars and spray at 40cm
fine: pressure to 4.5-5 bars and spray at 60cm
also may add 5% thinner to give finer texture
while spraying keep trigger pressed continuously
if get some small inconsistencies in texture, use some twisted and folded over masking tape to dab and fix the inconsistencies
keep finished vehicle away from water for one week
Great tips! I really appreciate the video, keep up the good work! Greetings from Long Beach, California
Thanks man.....🙏🙏🙏
Thank you for this video my golf cart came out perfect using this tech THANKS for this awesome video i took the tape off the first 30 mins also like you said its perfect again THANKS
Great 🙌🙌🙌🙌
Great video, you explained everything very well.very easy to understand. You gave excellent tips. Very important tips that I appreciate very much. Thank you sir. Please,have a good day.
Planning on coating my ‘04 Tacoma in raptor liner in the near future. I’m extremely thankful for your informative video! Best advice out there!
Thanks man
Great info and well presented.
Thanks 👍
Thanks nephew, best tips I have heard yet! 👍🏻
Lol...yes uncle Roger. 😄😄
Very helpful! Lots of useful tips I haven't heard anywhere else!
Awesome, thank you!
This is the vid that I've been looking for...Thank you
Awesome video and great info! Thank you for the concise directions 👍
Our pleasure!
Great video! The entire time I kept watching your Rolex GMT-Master II.
Thank you very much for the useful tips! This is the best explanation I've seen. Can I ask you two simple questions?
1. If there are spots where I sanded down the original paint to the bare steel, do I have to paint it with some primer, or can I spray the Raptor over the bare metal too?
2. Is it bad if I wait few hours, maybe a day between the Raptor coats? I'm thinking of spraying my totally disassembled body parts one by one, then wait till I can touch them, assemble the car, and do the texturing spraying.
Greetings from Hungary!
You must have a strong primer or paint scuffed as a surface. Most of these products will not adhere to bare metal.
Thanks my friend . Excellent tutorial
21 days huh? . Funny story. I sprayed mine 7 yrs ago. It baked in the hot sun for the whole day. That evening we had a pea size hail storm come in. Didn't do anything to the truck. Lol. Painting my truck tomorrow needed a fresh review. Thanks island man.
God Bless you for making this video. Everything you said NOT to do, I probably would have done. Subbed and Liked And thank you again Cocoh.
I appreciate that!
Excellent video...very clear...very usefull...thank you
I feel like this men just shared some trade secrets with us 😀 awesome video!!!
Great video with so many helpfully tips. Thanks one more time👍👍👍
🙏🙏🙏
Great results.
Did you use the upol vari gun to get the finer texture result or the standard gun which comes with it?
I drilled out an old air gun to 5/64 on the tip, it equals a 2.0 tip. Thats good for the base coat.
Great guide, thank you for taking the time to do it in English, apart from the 180 grit preparation reference, do you have a video? Also is there any additional advice regarding coating plastic bumpers or body panels, lastly what are your thoughts on roller or roller and brush application?
Hey buddy thanks for the excellent tips! Extremely informative video. And when I raptor my box truck I will definitely follow your very wise well thought out tips!
Make sure you watch it again just in case you forgot...lol
Good points that I never thought of. Ty
Thanks for such an awesome resource! I've been considering trying this on my 2002 RAM 1500, with the factory paint having looked like trash ever since I got it 3 years ago. Seems like something I should be able to do at home, which sounds awesome! After the 21-day cure time, is it safe to take a raptor-lined vehicle through a car wash? Mine tends to get pretty dirty after I get home from the trails, haha. Also, what's the best way to color match Raptor to a similar gray? I think I recall seeing something about buying tint on their website? And last question, is there a specific type of primer I should be looking for, or is it better to apply the Raptor directly to the body after surface prep is complete? Thanks again!
This is an amazing video thank you. What kind of fender flares are those in the front for the Cherokee?
This is a great tutorial. I'm planning to do this project.
Go for it!
Great video,thank you…
I’ve started painting my Hj47 troopy with this but thinned out 25% to get it flatter and 3-4 coats…
I’ve being toying shooting kbs clear over. It..what would be the best prep now my panels have been sitting for months with raptor fully cured?????
Cheers
From Dictator dans Australia
Did you end up shooting the clear over it?
@@Tom-wp3ev yes just on some small things and I rushed it..pretty much the gloss just highlights the roughness…🤣…so I won’t be shooting that on exterior body work…but that kbs clear is hard as F@rk!!🤙🤙
Lmao good to know, I was curious what effect it would have!
Thx for your tips when painting raptor liner. Very helpful
Happy to help!
Such a great video! Do UPOL make the PU slow reducer/thinner? I'm having a hard time finding anything like that anywhere?
Thanks man😊👍. Very good video
Thank you very much by far the best information for spraying raptor liner.
Excellent tutorial! 👍thanks
really well done; thanks from Texas
Such a good video and great job with the English. So much detail.
great video, reducing for a basecoat seems to make the most sense,thank you
You bet!
Wow great video!! Answered alot of questions I had.
Glad it was helpful!
Do you meen DONT texture the door jam? Surely a less textured finish would seal better
I was wondering if you could add or cement in a boxed wired fresh garden along the front hood as well … raptoring around it
Awesome video, thanks for the tips.
Great! Many of my questions were answered by watching this! One question, can this be used inside the vehicle or will off gas be a problem later for people using the vehicle?
Thank you for taking the time to give us a very informative video!
Thanks for the video mate. Very helpful!
Great video with excellent advice and tips.
Well done. Great video for prep and paint of raptor. Thanks.
Thanks
After using 2 liters for the base coat, how much product was used for the texture coat? Great tutorial!
Thank you Marco, I really value your video, instructions, and advice. Good job my Brother! I’m preparing to Raptor a Grand Cherokee. I’m thinking orange with black. Is it possible to get a nice line where both colors meet?
Yes...its very possible...scroll through our instagram Raptor.indonesia.official
Great tutorial but one art is confusing. The rubber door “gasket” seals easily against the smooth factory paint. It seems spraying Bedliner introduces a rough textured finish which the “gasket” does seal as easily…
Old rubbers are very tricky. They are not as elastic as new ones.
If you add cement and mud and a seed to the mixture it might grow a plant 🪴 on top of your hood or to the side door
I feel ready to spray my 03 F150 thanks to you!!
Good luck!
Thank you for the excellent tips
Thankyou for a very helpful video!
Excellent! Well done.
Thank you! This is very helpful.
It's hard to get all the stripes out with dust coats. So why can't a person just spray it all heavy? Seems to be alot smoother and I like the way it looks?
Great video! Lots of great tips! Really helpful! Thank you! 👍
Great video, thank you for the information
I am impressed with your informative video, EXCELLENT job, no doubt. My suggestion, if you could show the painting technic in live video, it'll be much better for us to know and see the result, Again greatly appreciated your tutorial video. Keep up the good job. Cheers.
Great suggestion!
Very professional job on your video. What is the difference between the base coat and just spraying Raptor right on the prepped old paint?
Spraying the basecoat will ensure perfect coverage on small difficult areas hard to reach. Like edges.of the door or hood.
Excellent tutorial
U better listen to this Dude...well explained..
Thanks
Excellent video - thank you!
that was a great video thanks for all the details very helpful
Glad it was helpful!
Excellent video. Thank you so much for making it.
Great tips, THANKS 🙏🏻