How to Record and Reamp your guitar - Blackstar ID Core V3 Guide - Pt2
Вставка
- Опубліковано 4 лип 2024
- Learn how to record, Reamp and Monitor your sound with the Blackstar ID:CORE V3 series of amps. This works for the 10, 20 watt and 40 watt versions.
The USB cable you need to connect to your computer.
geni.us/MiniUSBCable (Amazon)
BUY FROM THOMANN:
redir.love/thocf/iqy7gojyji
BUY FROM SWEETWATER
10 Watt - imp.i114863.net/P11e6
20 Watt - imp.i114863.net/QVVaY
40 Watt - imp.i114863.net/Leeja
BUY FROM AMAZON
geni.us/BlackstarIDCoreV3 (Amazon Link)
TIMESTAMPS
00:00 Let's Begin
00:22 How to Record with the ID Core V3
00:40 Select the amp as the audio interface
01:55 Architect Software
03:10 How to record a DI signal
05:35 How to Reamp
10:50 How to use the ID Core V3 as a monitor speaker
Download the Architect Software here - www.blackstaramps.com/uk/rang...
Support my channel and look cool at the same time: teespring.com/stores/theguita...
Find me on social media here:
Instagram - / andyguitargeek
Facebook - / theguitargeek
DISCLAIMERS:
Some of these links have an affiliate code, if you purchase gear with these links I will receive a small commission at no additional cost to you. Thank you!
This video was not paid for by outside persons or manufacturers.
The content of this video and my opinions were not reviewed or paid for by any outside persons.
#blackstar #idcorev3 #recording
Click here to subscribe - ua-cam.com/users/theguitargeek
TIMESTAMPS
00:00 Let's Begin
00:22 How to Record with the ID Core V3
00:40 Select the amp as the audio interface
01:55 Architect Software
03:10 How to record a DI signal
05:35 How to Reamp
10:50 How to use the ID Core V3 as a monitor speaker
Hey man ..how do I connect the amp to my interface. Through the phones/rig output?
By far, the best and most useful video I've ever watched about IDCore, monitoring and reamping!!! Thanks!
Thanks so much for this video. I bought the 120 watt one for $300. Didn’t even know it came with this feature. It’s so convenient to demo ideas
Stellar! Waiting for my core 20, this tut will come in handy, surely, Shirley
Fabulous tutorial! I'm overwhelmingly impressed with the Blackstar ID, having returned a truly horrendously flawed Marshall Code which at best sounded like a 1970's transistor radio that had been dropped in the bath.
[Nashville, TN] Thanks for another great video Andy. Have you been able to hear the difference between the version 1, 2 & 3? If so, any thoughts on the sound difference or is it mainly a feature differences between the various versions?
Tysm for the video sir..... finally got to know and started using my ID core 10 V3 as an audio interface man...!!!!!
And yeah subscribed to your channel
And guys it's a perfect practice amp, just go for it.!
Thanks for explaning :-) .. Now give my ID core a place in my studio on safe place .. Lets record some songs !
The only person explaining Blackstar…whilst Blackstar is nooooowhere to be found. Aside from nice chaps on customer service emails. THANK YOU. Pleeeeease save the planet by continuing this content.
I did find one strange thing, as I’m using a stereo 100 from 2018/19, after installing Architect, I don’t have Cab Lite, and therefore can’t boost the signal, no fader on mine. That’s curious. I wonder if I can’t get cab lite without V3.
So the signal in logic is rather low. Possibly workable though. Can’t seem to find another way to boost it.
Cheers.
Thank you so much!
Thank you so much! Appreciate it!
Hello guys. I'm using Reaper as my DAW. Does anyone know why Stereo imput ID Core 3 is also being distorded, while 4 is not (as I understand neither should). Thanks in advance!
Could you tell me please, which programm are you using in this video?
If anything, it’s an interface you can run neural or bias fx through it. Not crazy about the tones on the idCore.
Very helpful video 👍👌😍
Is there any possibility to setup DAW and ID:Core the way IDCore is reamping, while I still can hear other DAW track for sonic context? The only scenario I have found so far is reamping one specific track and then switching reamping mode off to listen what i have "reamped and recorded", at this moment finally can hear that with all other tracks... Will external soundcard with assigned outputs, (other than ID core bunch of 1-4) let ID:COre just do its reamping job and simultaneously listen other tracks from DAW thru the card? Do not know, how many different outputs Logic Pro can handle...
omg your video helping a lot very thank you
Idk why the software can’t detect my amp? Is it because of usb cables or missing drivers in my pc !
which recording app are you using for blackstar amp??
Thank you very much, the video was very helpfull
You’re very welcome
cant find input 3/4 on my blackstar id60,any ideas on the reason why?
Reamp is an awesome option especially when looking for “that sound” you get as many chances as you want to really Shape the sound and keep your “ perfect performance “ from your first take. Wait what?
My Cab Rig doesn’t work as well as the level gauge! Is this because I don’t have a jack plugged into the cab rig socket? Tia
Thanks a lot andy!😊
You’re welcome!
How is the white noise in this version (hissing noise)?
Brother after I plugged USB to PC from The Amp….i can’t find the ID CORE in the device sections in Reaper or Audacity 😭😭 please do help !!!
guys im trying to record this amp in fl studio. everything sets up and records fine. but when i listen to the recording, all it is is very distorted static pls help
Thanks
So my Macbook air only has USB C inputs, so I have to use a USB c male to USB A female adapter. Will this work?
@andyguitargeek First of all, I really appreciate this video! It has really helped me!! I have a Blackstar ID:Core Stereo 20. I think this was one of the earliest if not the earliest version. My architect doesn't have the slider which ups the output volume in my DAW like you use in the video. My Architect is fully updated. I notice that the the volume in my DAW doesn't change no matter how much I increase or decrease the volume in the app/on the amp. Is there a way to up the output volume like you do with the level fader without having that fader in architect? Does that make sense? Maybe I just need to upgrade to a newer amp... but there must be a way....
I have the same problem when I connect my amp to an iPad. I can’t adjust the volume in GarageBand for the iPad and I get a really weak signal. Did you ever find a solution?
Can anyone help for this with studio one?? I'm very new to the daw and need some help navigating.
Hey, which is one better the boss Katana 100 than the blackstar id 260 ??
Can i use amplitube with idcore amps??
Can i use it as a speaker using my phone?
Have you tried this with garage band on an iPad? I can’t increase the input volume :(
thanks
I could use some help, my audio is clipping even tho I have the fader pretty low, and I have no idea what im supposed to do
What else do you have to download to record
Can the output of the drums damage the amplifier speakers in any way?
It is almost a full range speaker.. So I don't think so
This was really well explained and helpful. But for some reason my DAW is not letting me use the ID-CORE 3 and 4 channels
They need to be on channels 1 & 2 for stereo
Blackstar states that this amp can also record Voice+EQ on Channel 3 and unprocessed mono signal on Channel 4 however in my ableton and reaper only channel 1,2 and 1/2 is showing.
@Jatin Kumar did you get your channels 3,4 sorted?
Hi Andy, nice video, but I think you may not be recording the "dry" signal you think you are. At least on my Blackstar ID Core V2, the USB interface sends a mono Preamp output (including Voice and EQ, but without effects or speaker emulation) to Channel 3, and the totally unprocessed mono guitar signal to Channel 4. My guess is the V3 amps are the same. Thus when you want a dry signal for reamping or for amp simulation in a DAW, you should only record a mono track of Ch 4 from the Blackstar. In your video IIRC, you recording track 3+4 as a stereo track which will likely lead to confusion, as these are really two mono tracks taken after/before the preamp.... (in your video, if you were using a 'clean' voice and flat EQ, then Ch3 and Ch4 may sound quite similar, but certainly not the identical, and definitely not the same using a voice with more gain/breakup).
When I record guitar with my Blackstar, I record Ch 1+2 in stereo to get the cool effects/stereo output of the amp, and then usually just Ch4 as a clean mono track if I want to go back later and use Amplitude or some such.
Tip: because the Blackstar does send a totally dry signal before preamp to Ch4, it works decently as a audio device to record bass guitar as well! (assuming using a DAW to then add EQ and bass amp simulation). I just keep the volume low when monitoring my recording so I do not damage the tiny little speakers. :)
Hi, sorry to bother but would you mind possibly dropping some contact info? I need just a little help understanding how to record tracks, it'd be just a few questions and then I'd be out of your hair
Thank you so much for this comment. I was searching everywhere because I could not record a DI signal until I noticed that having Inputs 3+4 enabled showed one channel was louder than the other. That's when I read this comment and understood what you meant. I was beginning to think my amp was faulty at this point.
i cant get a dry signal....please can you explain it again dude? cheers from argentina!!
Hi Guys, i am unabe to find channel 3 and 4 in my ableton..
Only 1,2 and 1/2
1,2 are same so i don’t understand what's the difference they are making and 1/2 is the stereo one
I am not able to find channel 4 i.e unprocessed one..
Can anybody guide me?
@@akhileshsharma623 After messing around for about 20 minutes i found out how to solve it ( reaper) make sure that your inputs has First on Amp 1 and last on amp 4. And then on the output range tab Do the same. What it was doing at first was ending on 2.
Fo they still have no update for bigsur??
can it be recorded with a smartphone?
Hi , like the video, wondered if I want to use the Architect as input but listen to it back through my Monitors/Audio Interface do I just use Architect as input and my interface as the output?
Thanks
Graeme
Also I'm using a Blackstar Silverline Standard
Yes you can!
@@TheGuitarGeek, thanks very much for the feedback...appreciated 👍
Is the input 3&4 for di???
What program can I use for Windows?
Hey Andy will this new interface software V3 work on the older Blackstar ID Core stereo series or do I have to stick with the old interface that came with the older one. This new V3 interface looks much much easier to use. Hopefully others might have asked the same question. Thanks Andy.
Hi, I have the older Blackstar ID Core V2, and I can confirm that the new software (Architect) works fine with my older amp. The only exception is you do not get all the cabinet simulation stuff, but everything else works. I _think_ it will also work with the V1, but I cannot confirm that first-hand. I believe Blackstar purposefully created Architect software to work with the older amps as well because the older software ("Insider") used Adobe Flash which is basically banned on MacOS and a hassle to setup on Windows 10.
@@toddtannenbaum7092 thank you
I really hope they understand that if you have a current gen Mac Book Pro, you have to use an interface to get a standard USB port.
So... What about with other DAWs? Like FL Studio 20 demo version? I'm trying to figure out how to even get it to record on there. I tried hooking it up and for some reason it has the amp pop up as an input but it said there was some kind of error. (I'm kind of a noob on this admittedly so can we put this in caveman terms please?) I would REALLY really appreciate the feedback. I just dont exactly have the money for anything super fancy right now. So if I need to just find some other software that's more cost efficient I can. This is all just WICKED confusing. .-.
Did you figure out anything yet?
Hi Andy , Wich Os do you use ?I The architect on my mac with os big sur does not detect the amp id core v2, also I downloaded and install the blackstar insider without luck.
Hey man, I’m on Mojave. I’m not sure how good Black star support is but they need to fix that!
@@TheGuitarGeek I sent them email
Can we use this amp with like Bias fx2,guitar rig or amplitude not just for recording tho be able to play too.
Yes..it’s why I plan on getting one.
Can i use core id v2 software with this one?
@@diegofiorillo6412 did you get it?? does it work?
Can I use iPad?
Why cant i plug the usb in to the hub?
0:36 it actually works with a usb hub i tried
Andy/Any one facing a weird buzz sound every 10-15 secs when the amp is connected to the Mac via USB and using LOGIC/Garageband as the DAW. I just can't shake it off and I have tried two different kinds of usb cable and still facing the same issue. any help here will be much appreciated!!!
Same.. I had to use a usb hub since my MacBook doesn't have a regular usb port
How do you fix it
You have to change the sample rate to 48000
same here.....any solution??
Having a LOT of problems with this amp and logic. Had the 20 second buzz, switched the sample rate to 48Khz. That fixed the annoying buzz. Now I've got issues with the distorted channel breaking up while playing. It literally cuts out when playing. Really annoying.
sorry to hear it. Maybe the amp is faulty?
Check your levels in the CabRig
Can we use Neural Dsp with this?
did you find out anything about this?
@@harshkumar1280 you need an audio interface won't work directly
Who let the Daws out?
Too much latency. How to reduce it?
My recodings keep cutting and not inputting almost like data isnt being registered what should I do
Hey Dort. That’s definitely a question for Blackstar technical support
@@TheGuitarGeek i really like the fact that you still replay im subscribing now
@@dort5309 welcome
To my channel 🙏
What Different with v2?
Try the other videos on my channel for that 👍
It sounds so much better through the amp then the usb, sad :(
This made me feel stupid. I literally do not get what any of this means 😖 fuzzy recordings it is
Sorry to hear that. Try turning the gain down.
mic it it sounds like crap di in
too much latency
So got amp plugged in watched this video I don’t run Mac and I’m lost from the very start how the fuck ya ment to work this shit out too complicated