DIY 40 x 60 Pole Barn Build with steel trusses (Part 2). Time lapse video pole barn setting trusses
Вставка
- Опубліковано 25 сер 2020
- Time lapse video of us building our pole barn. In this video we pour concrete, acid stain our concrete, setting metal trusses install 2x6 purlins and put on the metal roof. Part 3 will show us putting metal on the sides, drying in our offices , how to spray foam insulation DIY and Building our stalls.. We will be adding a 1to 1.5 kw solar system and 2 kw of wind to power our barn. So watch for future videos. If you have any questions or comments please leave them below. How to build a pole barn. Post frame barn
Link to part 3 - • DIY 40 x 60 Pole Barn ...
If you want to learn more about living off grid (solar and wind) ,homesteading, self sufficiency, growing your own food, preserving your own food and organic gardening then follow us on Facebook and subscribe / hippiehillhomestead .
Don't forget to subscribe and click the notification bell to be notified when we post new videos.
Here is a link to the top 5 mistakes I have made. • Top 5 pole barn mistak...
Thanks for watching
Click here to subscribe - / @hippiehillhomestead
Follow us on Facebook!!!! - / hippiehillhomestead
www.hippiehillhomestead.com
![Lp. Последняя Реальность #97 ЧЁРНАЯ МАТЕРИЯ [Анти Скинт] • Майнкрафт](http://i.ytimg.com/vi/k4MjXCzKsYw/mqdefault.jpg)
I hope I can get my barn nice as your
James, I am sure you can. When you are building it by yourself it is hard work but well worth it.
Good videos, You may wind up replacing the transparent panels, I had to after 6 years.
Yea the panels will need replacing, but the amount of light they let in is worth it to me. Thanks for letting me know how long yours lasted. I tried to do some research on how long they would last and everything I read said from 2 years to 20 years. LOL
Thats a good idea using the man lift to set those trusses!
Thank you. It worked very well. I had to rent a 50ft lift so it was big enough to lift them.
Hi thanks for your videos! I am in the process of building a 40x60 pole barn my self. I’m having slight issues with the 6x6 posts warping towards the top. Is this something that you had to deal with on your build? If so did you have trouble putting trusses up? Thanks again.
Yes I did have trouble. But all the trusses went in fine. One of mine on the end I had to put a 20 ft pole on it to straighten it. How much did they warp?
@@HippieHillHomestead mine are warped slightly. I think I can deal with it for now but my fear is that it will get worse before I put trusses on. On one of the 9 posts I have in the ground i might be 4 inches out at the top. That number will decrease as I have not cut the posts down to final height yet. I still have 11 more posts to set and then I can put trusses on. This weekend I’ll finish setting posts and then hopefully next weekend I will set trusses. Thanks for the speedy reply.
@@CollinsCountry Ours bowed in several inches on each side, when we went to set the trusses we put a crow bar between the truss and the 6x6 and pushed it in. It wasn't to bad with 2 people. Mark the center of the 6x6 before you start this will make it easier when you set your trusses
@@HippieHillHomestead excellent. Thanks a lot for the advice. :)
Hey I’m doing this now! Same trusses and all and I’m trying to figure out what size posts would be best! What Would you recommend? I’m tryin to build my family a barndominium! Thank you
Hi Andrew, Generally the size of your posts depends on the height of of your barn, wind loads and snow loads. We used 6 x 6 posts but I wish I would have used 8 x 8. Good luck with your build. If you have anymore questions let me know.
In your 5 mistake video you stated the Trusses were very heavy duty and well made. I watched all the videos and have yet to see who you ordered them from. If you don't mind please reply with where you purchased. Thanks
Andrew, Sorry about that. I ordered mine from Parker metal supply. Austin Parker 931-316-6635 Thanks for watching.
I am considering building a large garage using 6x6 posts on concrete and steel trusses on the posts. Please let me know where you got your trusses.
Hi Danny I purchased my trusses from Parker metal supply 931-316-6635 ask for Austin Parker. Good luck on your build. thanks for watching.
Sir did you pre-drill the metal?
On the lean toos I did but on the main barn roof I didn't. Thanks for watching
curious why you used steel trusses instead of wood? cost? strength? ect? Also, curious approx what they trusses cost each?
We went with metal trusses for the extra strength, they are cheaper and they are easier to build with. All the trusses total cost $2700. Thanks for watching.
where did you get your trusses?
Parker Metal Supply Sparta TN 931 316 6635
Are the purlins spaced at 600mm centers?
Yes, they are spaced at 600mm or 2 feet. Thanks for the question.
@@HippieHillHomestead Another question: Are the trusses made from 50mm x 3mm angle? I guess that's 2" x 1/8"
@@fleaniswerkhardt4647 Yes they are 50mm x 3mm angle. Thanks for the questions
@@HippieHillHomestead OK thanks. I have to build something similar to you barn and the trusses need to span 10 meters. Would trusses made from 40mm x 3mm angle be up to the job ?
@@fleaniswerkhardt4647 I built a 30 foot (10 meters) x 50 foot shop 9 years ago. I will measure them tomorrow and let you know.
How long do the roof trusses span?
May I know the measurements of this please.
Great question. You need to set your 6x6's inside measurement 39 feet 1 inch. Outside measurement 40 feet. Then each truss has an 16 inch overhang.. So the trusses are actually 42 feet 4 inches total length. If you have anymore questions let me know. Thanks for watching.
@@HippieHillHomestead what is the measurement of each triangle? The horizontal, the vertical, the diagonal (hypotenuse)?
I'm trying to design my own, whatever it is you can, i can start from there. Thank you very much
@@lethaldriver Sorry just now getting in. I will measure everything tomorrow. I have to go pick up a greenhouse I bought at auction in the morning. But as soon as I get back I will measure it. You are welcome, happy to help a fellow DIY'er. You will have to let me know how they turn out.
@@HippieHillHomestead thank you again. I'm looking forward to that valuable data/measurements.
@@lethaldriver I did get them measured yesterday. From the top point of the truss to the bottom center is 53 inches (side A) From the bottom center out to where the triangle meets the truss is 99 inches (side B) hypotenuse is 112.29. If you need anymore measurements let me know.
Do you have a email I have a few questions
Yes Miles. hippiehillhomestead@gmail.com Email me anytime and I will try to answer your questions. Thanks for watching.