Compare Drywall Taping Tools with Columbia Automatic Taper Vs Tapepro Mud Box
Вставка
- Опубліковано 5 чер 2019
- Welcome to part 1 in a drywall taping series, comparing these two great, time saving drywall taping tools.
So lets compare the Columbia Automatic Taper to using the smaller Tapepro Mud Box with each having their benefits.
There is much to say about the differences of tools and the best application which we will cover in the final video once the results are in. Anything anyone wants to add, pop it in the comments below. So I can be sure to mention it in later videos. Subscribe if your not here goo.gl/dDcLgJ
Hey Subscribers! Do you use these tools? Share with us your best tips & methods - send your videos to drive.google.com/drive/folder...
#Columbia Automatic Taper - www.proplaster.com.au/automat...
#Tapepro Mud Box - www.proplaster.com.au/tapepro...
5% off when you use #MAXKIL in the checkout
Hey Send Your Construction Videos to - driveuploader.com/upload/dgXj...
Don't miss a video Subscribe Now! goo.gl/dDcLgJ
Follow Maxkil on Facebook / maxkilptyltd
Follow @Maxkil2 on Instagram / maxkil2
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil.com/
Old mate running the bazooka must’ve slept in and didn’t have time to get out of his pjs 😂😂. Good stuff as always max
these guys always have easy ass 8 foot tall jobs and never have to tape high angles..... must be nice
Exactly..candy ass bullshit
The guy on the bazooka is the captain of the crystal ship getting around on his ice skates.
Guy has sun glasses on and PJs...where did you find him... 😆
Hes comfortablely stoned😂
Australia lol
Good stuff Maxkil! 🔥 Can’t wait to see Part 2 man!👍🏻😎
Thanks Paul. There's going to be around 4 parts to this one.
Harmonious and wonderful team
I put on 15, 500ft rolls of tape in 3 hours with the Bazooka. We where working on a Hotel 3 floors 69,000 foot of rock per floor. That was my flame to fame back in the day.
Nice work
Don't forget to vote in the poll on the video!
Keeping the roller and and angle head in a bucket of water helps keep them working better
영상 잘 보고 있습니다!
늘 좋은영상 감사합니다!👍
Cool stuff. But the guy in the pajamas don't know how to run the bazooka.😂😂😂
Angles in paper and taping compound, then flats and buts in 60min and fiber fuse. One wash for the auto taper and pump followed by a 5.5 box that is scraped not followed and the job is ready to top by lunch no shrink lines in the tape
What do you mean by not followed?
@@joshlester4313 I think he mean not fallowed by another box coat or hand coat until it’s dry
What do you guys prefer? I don't know if I should buy the bazooka or the mud box
holy ceiling gaps
Now the prices of those tools 🤘
Very good. Máster
Thanks man.
Believe or not Tapeless Drywall Finishing is coming :)
Yeah a Australian company called FX has a tapeless solution called FX no tape
@@chrishing8491 seen it..complete crap..
Should have gotten someone who knows how to run a bazooka.
It was the first time he use this type
This is giving me anxiety.. Butts, flats, then angles - ALWAYS. ✌🏻😂
butt it always turns out flat
Wyatt Batte that should be the goal.. however this bazooka guy seems to be inventing his own order to things. In a “speed” contest, he is really creating a lot of extra work for himself by doing things out of order.
I was thinking the same thing. Like nooooooo!!!
TOTALLY BUGS ME TO SEE THAT!!!!
Thats some exelent team work,
Why do you tape corners first
Taht guy wiping should be doing scrwes
Columbia nstad of tape tech
Yeah great teamwork! Don't always tape corners first. Thanks for stopping by
We usually only use two people for corners but for this video and seeing as it's a speed video we did the screws and a few things the previous day to have 3 people on each job!
👍
I feel bad that they are coming in behind a poorly hung dry Wall job but great taping skills! Let's hope there weren't any clickers in the angles. 🙏
where can i get the machine to play the synta
THREE GUYS DOING INTERNALS ,THATS EXPENSIVE
Poor guy actually got mud on his shirt. I'm surprised he didn't go home to change it. 3 guys chasing each other around then getting in each others way. Stupid. a 3rd guy to wipe everything down? Seems you could do it the traditional way with less aggravation. One guy, his pan and knives and some skill and he will move fast enough. Quicker is not always better and certainly not more effecient.
How many or much in euro thanks the machine thanks
What brand the flusher
can am
6:34 🤦♂️😂
Haha Andrea. No he did it on purpose for the camera.. I suppose most people will edit that out but I hope he doesn't mind. Haha
Classic 😂🤦🏼♂️😎
@@MaxkilDon't worry Max, I don't mind laughing at myself 😂
Tente traduzir. Português.
Aqui no Brasil esta usando cada vez menos esta fita de papel. Estão Usando mais a fita telada.
Parece uma rodinha
Embora a norma diga que só essa é a correta.
What’s with the massive gaps between the walls and ceiling?
Coving 😂✔️
@@maxnoble523 figured it out. Lol. We don't do that in canada, we do tight joints, mudded square, and then paint. Sometimes customers ask for "coving" which we call crown molding which we install after that.
Wasn't familiar with the process in Australia. 👍🏻
I'm from the UK, yeah we do the same unless asked for something else, crown moulding for me is fancy victorian style coving 😂👑 "mud" is a cool term would like to know why you call it that 😎, we do papers with joint cement pissed back metals and tapers with easi fill 60 to get shape without hanging wet for ages then final with normal joint cement, all by hand 😂 Would like to see how you boys do it over there, I'm not a dryliner BTW I'm chippy by trade but cover all aspects as usually move from one refurb to the next and times not really an issue on day rate 😉✔️😇
@@maxnoble523 I don't know why we call it mud, it's just always been since I started.
For corners we use a "banjo" or something like I to apply the paper tape to flat runs or corners and then go over corners with a flusher and flats with a taping knife. On outside corners we use either full metal bead or metal reinforced paper corner bead.
Look up "Vancouver carpenter" on UA-cam, he's got a few videos about process.
Yeah all the same it's as broad as it is long really, technique is why I watch these boys, not looking for the process. What would you do without a banjo? I apply to the internals with a tar brush 😂 then corner trowel and clean up with my trusty stubai 6, what blades do you boys use for first hit? Can't rate my stubai 6 highly enough tbh tapered ground with a stiffener braised to the top holds a superb edge
One grenade got them all ;)
if the guys running the angle tools catch up , the bazooka guy is going too slow and most guys do the flats first
I dont have à Good english sorry mais oui nous avons pas mal de machine similaire ici mais nos pose placo ici se fond plus à la verticale que à l'horizontale et sur railm48 non pas sur bois
bon à savoir. comment sont les prix?
@@Maxkil en moyenne près de 1000euros si je ne me trompe pas tout dépend de la marque biensur peace
Salut pourquoi en France on pose le placo à la verticale et pas à l'horizontale? Je sais qu'a l'horizontale en France c'est seulement tolérer lorsque l'on double la cloison.
Pour moi la manière de faire des américains et es australiens est plus économique et efficace puisqu'il y a moins de perte et la pose en est faciliter puisque lorsqu'on porte une plaque c'est à l'horizontale.
I came here 4 demo or explanation on dry wall tools learned more from the public skeptical commemmts on procedures, butts, flats,angles. Couldn't under stand a word hardly.MUSIC?
Yeah sorry about that George
I know it's probably been asked many times. But why is there always gaps at the top angle?
Also that dude running the gun is a beast with that
Takanami wondering the same thing!
Gets cornice up there like 75% of time always cornice
Definitely NOT a beast with the tube. Lmao. He good lengths tho it looks like. Aussies have a good system for how they finish. Aussie system and US system could be combined for ultimate system. Great work as always Max and those drywall gangsters! Lol.
Yeah it was first the he used that taper. Thanks for tuning in again mate!!
Thing is this.....all automatic tapers are basically the same as all were copies of Ames. I don't remember mate saying how many years experience he had but, I cant see much time behind that thing personally. Its takes years to run it fast and efficiently to keep 2,3 or 5 guys wiping tape. Personally, I can keep 3 or 4 wiping tape behind me. Angles, internals you call em, are in every house in the states. Have 1 guy running tube, 1 rolling and glazing and last guy picking peaks. (You call em 3 ways I believe.) If you're fast enough on the tube in angles, it's a 4th guy rolling while 3rd is glazing. Bottom line, not impressed with tube capabilities of that guy. In your challenge of bazooka against that modified banjo y'all use, those guys be running their ass off keeping up with an average tube runner from the states. I'll show you when I get there. Lol. You told me you had one so we'll use yours to prove my point all tubes are basically the same! Looking forward to it!
🙏💪💪💪👷♂️👷♂️
Flat box
I just put together a couple boxes using Pelican Vault V700 and V800 gun cases to hold my drywall tools....have a look here ....drive.google.com/folderview?id=1KBhvatMfJBW_GZYnLnauwdB2XSfmVP56
4 guy ahahah
LOL ..IKR? 1 man job. You can smell the puppies being made here
He's struggling, feeling the pressure of the drywall gangsters.
Yeah its the first time he used that bazooka hasnt had a good play yet
Hi I'm Mohamed Amir 49 yrs old from Mauritius experienced 32yrs on painting. I like ur video. I would like to join ur company. My mobile no. +23057894278. Hope to ve a favourable reply Sir. Thanks
Seriously I see lost of money 3 guys for one taper!
Put those 3 boys with a shit box n "béquille" n we would have done the job in 10 minutes 3 experiences guys for all the job!
I work with a tall guy who drop 26x500foot paper in 12 hres with the shit box.... One guy 26 paper roll can you imagine those guy they are 3 guys n it took 15 minutes for 10 angles XD
Un 15 minutes you close the job with the shit box XD
Cut out the music... if you can even call it that.
Hahahahahahahaahhahhhajaajajajahahajajajahaah
First, Columbia it’s not exactly the best bazooka. ( tape tech or North Star)
Second, the guy doesn’t know the tricks. He stops and pull out the tape with the hands. In a normal situation you don’t stop for every cut.
Looks pretty sloppy to me. I hope someone came behind these guys with a knife and a mud pan to actually smooth out and wipe the tape clean. Not a realistic demonstration of how to properly use a bazooka, IMHO.
Either that tube is a pos or you are struggling with it
first time he used that one
Corners are last flats and buts go first soooo amateur
Too many commercials,so I clicked out.
So slow
The bazooka guy is new too I tape way faster than him he is too slow
Can you make me a video of the bazooka. Not too many people use one here
Tente traduzir. Português.
Aqui no Brasil esta usando cada vez menos esta fita de papel. Estão Usando mais a fita telada.
Parece uma rodinha
Embora a norma diga que só essa é a correta.