I use side dikes to cut the clamp & ordered a 13mm wobbly just for the turbo bolt. Not so terrible. Boost tube drivers side / cold side was way more difficult. 2019 GMC Denali. Banks intake, throttle booster, map sensor remount, derringer.
Josh you do great work. I have 2015 ram 3500 with 6.7 and Asian transmission, putting on Fass fuel system, Harvard oil filter system filters down to 2 micron. What other system would you recommend. I will watch your UA-cam channel. Tim @ T&M FLEET SERICES
Thank you for watching. Definitely do the Banks monster ram and boost tubes. Lower EGT’s, better economy and getting rid of the intake heater grid bolt issue
@@Trukstuf I have torn it apart to the point where the cab will move up about a half inch then grab something in the front end I’m having a really hard time figuring out what the issue is I was wondering if you have any experience with 2024 trucks specifically because that’s what I’m trying to pull
Josh, thank you for the outstanding installation video. Great tips and tricks!
I became a subscriber after watching JB Reviews. Thank you for your content
Same. Good stuff!
And I want to thank you for watching!
Josh has been my mechanic for 15 plus years! He does great work!
I use side dikes to cut the clamp & ordered a 13mm wobbly just for the turbo bolt. Not so terrible. Boost tube drivers side / cold side was way more difficult. 2019 GMC Denali. Banks intake, throttle booster, map sensor remount, derringer.
Great vid, good luck with the channel, just subscribed. 2021 Duramax owner here
Thank you for the sub and the comment!
Great Work Right There
you remind me of my bunker Weapons mechanic in GTA5
Cool.. good stuff..
this is great!
Josh you do great work. I have 2015 ram 3500 with 6.7 and Asian transmission, putting on Fass fuel system, Harvard oil filter system filters down to 2 micron. What other system would you recommend. I will watch your UA-cam channel. Tim @ T&M FLEET SERICES
Thank you for watching. Definitely do the Banks monster ram and boost tubes. Lower EGT’s, better economy and getting rid of the intake heater grid bolt issue
Will the Banks products void my warranty I have ram extend warranty .
@Trukstuf
Does this job require tunning
Does banks also offer a high flow intercooler?..
For some applications. Unfortunately for the ram, not yet.
@Trukstuf Location ? How can I get ahold of you. would like some stuff installed.
Where are you located?
Could I get into contact with you about pulling a 2024 rack cab
Ram*
Of course
@@Trukstuf I have torn it apart to the point where the cab will move up about a half inch then grab something in the front end I’m having a really hard time figuring out what the issue is I was wondering if you have any experience with 2024 trucks specifically because that’s what I’m trying to pull
Just for reference I have done plenty of ford cabs just never a dodge so I’m pretty confident I got everything visible
Could be the front mounts, steering shaft and if it’s a mega cab you have 10 cab mounts. Other than that it’s a duck shoot
I have a 2024 that’s still under warranty. I’m still hesitant because I don’t wanna void my warranty.
Do let them fool you…. I drive a 2022 and I had to sue them to get results.
So, you probably have a warranty like do/did 😂🤷🏻♂️.
What year truck is this?
2023
Where are you located
Salt lake city
Where are you located?
Salt lake city
Shit that a long way from FL. Thanks
@@finishline92 But it’s a nice drive!