Ok. So this one only took 13 and 1/2 minutes, so I'll expect you to have the Green Goblin up and running in no more than 15! Lol. Great stuff as always Joe!
@JustMoparJoe Joe it's like building a house. If the foundation is good she will last the test of time. Take your time and do it right. Ya got to go slow to go fast
For a 87 year model and I was a young man like you back then that is as solid 🪨 of a great truck as you can get. Hopefully it is a 360 manual transmission scooter!
Thanks, Ed. I’ve been needing to do a quicker video for this project. I actually left quite a bit out because I didn’t know how to shorten it anymore 😅
Damn man!! You really ARE a Joe of all trades...that looks mint mate...the Raptor looks really good too, real neat job...its your attention to detail that will keep them coming back Sir
What a transformation! I love older Dodge Rams, especially standard cabs. That Eastwood Rust Encapsulator is some good stuff. One thing Rams are known for is tailgate rot up here. My truck is a 2005 1500 and the body is very solid. I took my tailgate off, masked it off except for the very bottom inside seam. That's where rust always starts over time. Sprayed a nice clean edge of the Eastwood, left it untouched. You can't see it even with the tailgate open. That was five years ago, still solid. Love that steel blue color. What's it called?
It was a light blue metallic, with the factory code from that year model. I have the Nason code under the basecoat video of spraying this one. Definitely unique.
Beautiful. Crossing my fingers that mine comes out that slick. About the same color too is what I've had in mind for years now, since i painted my engine block in 2020
Watched the video while trying to get the window to go up and down when it's cold, on my dad's old Toyota. You painted that whole truck, and I ain't done yet. 😂 Looks good Joe!
Very cool! I have a playlist on a similar truck called Juan Carlos. Also a playlist on an 87 called “Red Sled”. And my most recent is the “ramcharger revival”
@@JustMoparJoe yes sir I seen Juan Carlos, and the Ram Charger Revival. I’ll check out the red sled today. I think my 1990 may have a cracked head or head gasket leak. At idle it looks like steam coming from the DS exhaust
Just found your video and man does that look great, nice job 👍🏼 I have an 89 Ramcharger with the 2-tone blue paint that needs that exact treatment… 75k original Texas truck and such nice condition it’s crazy. Unfortunately it’s going on eBay I guess… I’m heading towards my 3rd back surgery and just can’t give it the love I wanted in my position.I would put it very close to your D100 in condition.. anyway, great job
I can’t remember the exact name for it, but it was the factory color code bought in Nason. I have the code under the base spraying video if you ever want to buy some.
@@JustMoparJoe nice im trying to find out how to build a 472 hemi i can find it as a crate motor on google or 472 stroker hemi but i cant find how to build one i havent found a build on you tube either i find cars or a few dyno but no build info
Looks great! What paint did you use? I have been trying to decide on a dark blue or grey-blue for my '87, something very close to this is what I pictured in my head.
@@SKMopars Nason is a fairly popular paint. This was their base and clear. I put the code there in case you wanted to get a sample mixed. Many Oreilys and Crow Burlingames mix and sell it.
Where are you located? I’ve never seen someone be so careful and attention to detail like this? We have a older dodge we’d love to have everything you did here done.
That's the way the doors were my great uncle that was in WW2 had a old Ramcharger he bought brand new back in I want to say 74' but I was young and I remember when they closed the doors he would say but some elbow into closing it.
I can tell you from experience...most of them didn't. Mechanically they were very dependable but all Dodge trucks up until 2010 when RAM took over they were big time rust buckets. The first gens like this one would rot away in 10 to12 years even when undercoated if you lived north of the Mason Dixon and had any kind of winter. The windshields on them were held in buy a big rubber gasket and most of them leaked enough to let water run down the firewall inside and get under the floor mat so it was always wet under them. The floors would rot out then the cab mounts would go. I bought a gorgeous brand new 1977 1 ton Power Wagon with the HD 360 and TF trans. Had it thoroughly rustproofed. Within 5 years I had it totally repainted and new doors put on. 5 years after that the box was shot so put on an old dump body off an international truck my dad had used for the farm. It took 2 more years for the cab to rot off the frame so the engine and trans came out and the rest went to the scrap yard. I had other Dodge trucks with similar stories. Even the second Gen Dodges rotted out around the back wheel wells...of which I am experienced with...right up until 2010 It looks like they have finally figured it out. The only Dodge trucks that lasted were the ones that were babied and lived in the southwest and now any that are for sale the sellers are asking stupid money for them. No thanks been there done that.
Ok. So this one only took 13 and 1/2 minutes, so I'll expect you to have the Green Goblin up and running in no more than 15! Lol. Great stuff as always Joe!
Haha! Might need 20 with yours 😂
I remember this truck! It turned out very nice!
Thanks, Tim! It’s been 2 and a half years! Crazy how the time flies
What I really like is how much you get done. Your drive to make stuff happen reminds me of being 30 years younger.
Thanks brother! This one was done in 3-4 weeks in a row, back in 2020.
Great job Joe!!!
Thanks brother! I will get another truck in someday to give the works
Good Lookin Truck
Thanks brother
Gives me good idears for our 85 dodge shortbox pickup.
Awesome!
From farmtruck to the coolest of cruisers! She's a beaut!!
Thanks, Terry! This was back in 2020. Got it all done in about 6-8 weeks. Lots of little things. Much better now!
Sweet truck.
Thanks brother
Great video Joe. Just what I want for my shop truck daily driver
Awesome! The prep always takes the longest
@JustMoparJoe Joe it's like building a house. If the foundation is good she will last the test of time. Take your time and do it right. Ya got to go slow to go fast
For a 87 year model and I was a young man like you back then that is as solid 🪨 of a great truck as you can get. Hopefully it is a 360 manual transmission scooter!
Beautiful job Joe.
That's a nice pick up. 👍
Thanks, Ed. I’ve been needing to do a quicker video for this project. I actually left quite a bit out because I didn’t know how to shorten it anymore 😅
💪🏼
You came in too late. Gotta start back over 😂
@@JustMoparJoe
A+
I love that color!!
Truck turned out great Joe! I like that generation of Dodge trucks. Daily drove one for years.
That’s Awesome! I drove my high school truck from 15-21. I finally parked it when I needed to hit the interstate every weekend.
Looks very nice
I’ve had over 20 people ask me about that steering wheel!
Damn man!! You really ARE a Joe of all trades...that looks mint mate...the Raptor looks really good too, real neat job...its your attention to detail that will keep them coming back Sir
Thanks buddy!
Hey that HFT gun in Joe's hand is like a magic wand! 😂😂😂
She worked out alright! Thanks John
Another beautiful job well done Joe , she’s gorgeous
Thank you! Cheers!
Truck came out awesome man!! Great work!!!!
Thanks brother. This would be a sweet spot for the gen 3
One nice looking truck, good job joe!!
Thanks, Jeff! It was a good learning experience
Outstanding work, Joe! Better than new.
Thanks brother!
Needs a 408 stroker
For sure. But it’s an actual daily driver now with the 318
That turned out beautiful
Thanks brother! I think I had it totally painted from start to finish in 14 work days. Cool truck! Cream puff 318
Looks great my little truck I love little my 83 miser
Absolutely! Love your truck, buddy!
My old jealousy bone is itching. What a great looking truck. Cant wait to see it painted.
It was a good start. I painted this one and did miscellaneous other work to it back in summer of 2020. The playlist is called “blue Meanie”
You done good.
Thanks brother! I’ve been needing to make a short video of all the stuff from that one.
Amazing Transformation, right before our eyes!👍👍
Thanks brother
@@JustMoparJoe Mopar Forever brotherman 👍👍🏁🏁
Faster than Overhaulin !!! Looks really nice. Good job 👍👍
Thank you! Cheers!
👍Lord that truck is nice! Great job! 👍🇺🇸
I appreciate it! I did this back in 2020. Hopefully my editing and filming has progressed
Just pick one up about to start on it
Great job, Joe ! Nicely done!
Thanks brother! Good to see you
That's a very nice little D100 great job Joe....thanks.
Thanks 👍
I just might ship my car to you to paint it! Good job!
Sweet ride Joe ! great job 👍
Thanks brother! Snowed in here, and wanted to throw together some old footage to make a quick one.
The old pickup turned out pretty Sharp 👍 👍 👍 👍
Thanks brother!
That came out real nice Joe 👍👍
Thanks brother! It needs a big block
Jamie sent me. Nice job on the D150
Thanks brother! It’s a cool little project
😎
Awesome transformation! Looks great! 👍
Thanks, Mitch!!
Just like on TV. Full resto in 13 minutes! Looks really nice.
Thanks brother
You made it look really nice . I enjoyed the music . You had a good variety tonight .
Thanks, Terry!
Throw a rubber bed Matt in the back. That will help keep the dents out and preserve the inner floor. Love u Joe your a real Mopar man👍🏻😎🇺🇸🏁🙏🏻
Thanks brother. The new owner does daily drive it and really enjoys it
What a transformation! I love older Dodge Rams, especially standard cabs. That Eastwood Rust Encapsulator is some good stuff. One thing Rams are known for is tailgate rot up here. My truck is a 2005 1500 and the body is very solid. I took my tailgate off, masked it off except for the very bottom inside seam. That's where rust always starts over time. Sprayed a nice clean edge of the Eastwood, left it untouched. You can't see it even with the tailgate open. That was five years ago, still solid. Love that steel blue color. What's it called?
It was a light blue metallic, with the factory code from that year model. I have the Nason code under the basecoat video of spraying this one. Definitely unique.
Very nice job brother! 👏👏👏
Thank you! 👍
Beautiful. Crossing my fingers that mine comes out that slick. About the same color too is what I've had in mind for years now, since i painted my engine block in 2020
Awesome! You’ve got it going on brother
Great truck, love that bodystyle!
Thanks for the support!
Now that is a beautiful truck! Good job. The owner now has a truck that's better than new.
Thanks, Buddy!
I hope you had a wonderful Holiday Season and New Year. Glad to see you back in the saddle JMJ!😉
Thank you! You too!
Nice job Joe.
Thanks 👍
Tjat truck is so pretty
Reminds me of dads 82 amd my baby the 83. I bet you were proud to put color on it....looks good
Oh yes. It was an easy one, compared to many rust buckets out there
Very nice. 👍👍👍
Thanks Jaybo! Happy Birthday 🎊
Looking awesome as always JMJ , I hope you have a great evening and stay warm, it's single digits here in Farm Belt country Pennsylvania. 4°
Thanks, you too! We are at a chilly 7 degrees here with snow staying around for a few days.
Looks good! Nice work!
Thank you! Cheers!
Looks Awesome Joe
Thanks, Mike!
I wish I could paint as good as you Joe you always do a damn good job one day you're going to have to do my car.....
Thanks, Danny
You're have inspired me to start doing something with my 87 long bed 😎
That’s awesome! Get it done! Check out my red sled videos!
Wow another successful old Mopar restoration 😊
Thanks, Shane!
You certainly have the gift
Thanks, Mike! This one is a few years back, but I never got to put it in to a single video.
Sweet little truck!
Absolutely! It’s a cool one
Nice! I'd drive it!
You and me both!
Watched the video while trying to get the window to go up and down when it's cold, on my dad's old Toyota. You painted that whole truck, and I ain't done yet. 😂
Looks good Joe!
Haha! This was back in 2020. I had that one done in about 8 weeks
The slower you go the faster you work 👍🏻🇦🇺
You got that right!
That looks really nice
Thanks Steve!
Awesome work!!
Thank you! Cheers!
Great shade of blue. Nice truck!
Thanks 👍
I watched the whole series when you did it, this little refresher was nice to see
Thanks, Greg. I was having trouble fitting it all in to one video
Great looking truck. Nice work. Most of them are all rusted out here in the north east.
Thanks 👍
Nice job. inspires me to get to work on my '86.
You can do it!
great job very nice truck I really like the paint color
Absolutely! It was said to be the factory code for that truck.
That is one nice lookin truck!
Thanks brother. I have more trucks coming soon!
Sweet. Awesome work.
Thanks brother
Its looking great, thanks for sharing, all the best to you and your loved ones
Thanks brother
Awesome. I just found this channel. I have a 1990 D-150
Very cool! I have a playlist on a similar truck called Juan Carlos. Also a playlist on an 87 called “Red Sled”. And my most recent is the “ramcharger revival”
@@JustMoparJoe yes sir I seen Juan Carlos, and the Ram Charger Revival. I’ll check out the red sled today.
I think my 1990 may have a cracked head or head gasket leak. At idle it looks like steam coming from the DS exhaust
@@gwgdog66 oh man, I do hear that those heads are prone to cracking. Many say it’s not close to a jacket . I’m not sure
I need to find a good Mopar mechanic in the OKC area.
Nice work!!
Thank you! Cheers!
That looks great!!! Sitting really nice too! Nice job.
Thanks brother
😎👍
Nice truck!
Thanks 👍
Very nice bud
Thanks 👍
Great lookin truck. Wish my 1982 was blue instead of yellow.
Beautiful 😍😍
Thanks, Coleen!
You know I think I've seen this truck around Searcy. I told Matthew, I said that's a cool truck.
That’s the one! He’s repainted some spots on it, I think after another door repair. But I was able to give him the same paint left over 😂
@@JustMoparJoe that's awesome it's a nice looking ride for sure
Looks like you did a real nice job of that if you come to New Zealand come paint my 1930 Plymouth good job brother hood
Wow man! That’d be a trip from here. Thanks brother
Sweet I got a 85 dodge d150 I plan on making videos on I just posted a short about the wiring trouble I’m having 😂
Just found your video and man does that look great, nice job 👍🏼
I have an 89 Ramcharger with the 2-tone blue paint that needs that exact treatment… 75k original Texas truck and such nice condition it’s crazy. Unfortunately it’s going on eBay I guess… I’m heading towards my 3rd back surgery and just can’t give it the love I wanted in my position.I would put it very close to your D100 in condition.. anyway, great job
I hope your surgery goes well. Please check out my ramcharger revival playlist
Joe got skills
Thanks brother!
Love it
Thanks brother
Gorgeous
Thank you!
She turned out real nice,proud to drive it anywhere . What you growing in that field back there?
Haha! Thanks brother. I can’t remember what was back there. Probably corn in August of 2020
Perfect
Thanks brother
What are those wheel and tire sizes? LOOKS PREMO!!!
I think they were the cragar Nomad chrome, 15x10 rear with 295/50, and 15x7 front with 245/60’s
@@JustMoparJoe Thanks for the info Brother!👍👍🏁🏁
That's a great find, I'd love to find an older Dodge pup in that kind of condition up here in Michigan 😅 not gonna happen Up here. What color is that?
I can’t remember the exact name for it, but it was the factory color code bought in Nason. I have the code under the base spraying video if you ever want to buy some.
That turned out really nice dropped down a little what motor is in this
Thanks, Steve. It’s still the factory 318. The owner added a 4 barrel intake and aftermarket distributor to wake it up some.
@@JustMoparJoe nice im trying to find out how to build a 472 hemi i can find it as a crate motor on google or 472 stroker hemi but i cant find how to build one i havent found a build on you tube either i find cars or a few dyno but no build info
@@steveburlingame1935 Rick Seeman is the hemi man. He has a very detailed build of his 572
Looks great! What paint did you use? I have been trying to decide on a dark blue or grey-blue for my '87, something very close to this is what I pictured in my head.
Nason Ful base BC B8364 IF B Std. #339422
@@JustMoparJoe thank you! I hadnt heard of them.
@@SKMopars Nason is a fairly popular paint. This was their base and clear. I put the code there in case you wanted to get a sample mixed. Many Oreilys and Crow Burlingames mix and sell it.
@@JustMoparJoe sorry I'm an at home novice, i really only heard of paint from Summit, Eastwood and Sherwin Williams! I knew there was more out there?
Drove an 85 this color in high school. Nice to see what it should have looked like new. Only thing that sucked was the max 10 mpg part.
Thanks for sharing! This one definitely deserves more more 🥊
Good looker
Thanks, Ricky!
Mopower
Thanks brother
Where are you located? I’ve never seen someone be so careful and attention to detail like this?
We have a older dodge we’d love to have everything you did here done.
I am in Central and Eastern Arkansas. This kind of started as my side gig, but is now my main job. Shoot me an email @justmoparjoe@gmail.com
@@JustMoparJoe we’re all the way in NC. We do go to Oklahoma every so often tho. Maybe we could drop it off otw. Lol
@@KaityWebster I’m off I40 😂
That's the way the doors were my great uncle that was in WW2 had a old Ramcharger he bought brand new back in I want to say 74' but I was young and I remember when they closed the doors he would say but some elbow into closing it.
Oh you are painting it. Duh, should have read the entry better. Beautiful job. Great truck.
Thanks 👍
Typical Dodge Truck, looking like it held up quite well for its age.😊
I can tell you from experience...most of them didn't. Mechanically they were very dependable but all Dodge trucks up until 2010 when RAM took over they were big time rust buckets. The first gens like this one would rot away in 10 to12 years even when undercoated if you lived north of the Mason Dixon and had any kind of winter. The windshields on them were held in buy a big rubber gasket and most of them leaked enough to let water run down the firewall inside and get under the floor mat so it was always wet under them. The floors would rot out then the cab mounts would go. I bought a gorgeous brand new 1977 1 ton Power Wagon with the HD 360 and TF trans. Had it thoroughly rustproofed. Within 5 years I had it totally repainted and new doors put on. 5 years after that the box was shot so put on an old dump body off an international truck my dad had used for the farm. It took 2 more years for the cab to rot off the frame so the engine and trans came out and the rest went to the scrap yard. I had other Dodge trucks with similar stories. Even the second Gen Dodges rotted out around the back wheel wells...of which I am experienced with...right up until 2010 It looks like they have finally figured it out. The only Dodge trucks that lasted were the ones that were babied and lived in the southwest and now any that are for sale the sellers are asking stupid money for them. No thanks been there done that.
Dang!
Thanks, Stan! Been a few years back. I picked up 10,000 subs since then. I figured someone had missed the build lol