C2 RED #46 is MIL on 1999-2002 PCM. That is correct. You really need a wiring schematic for your truck to make sure you have the correct wire, but in short, yes, it goes to the dash.
Good morning, I've been watching your videos, I'm in the process of ls swapping my 1990 2wd ck short bed. What motor mounts did you go with? Thank you in advance..
Thanks for the question, I have used these for all my swaps....here is a link on Ebay: www.ebay.com/itm/325257699143?epid=1054660548&hash=item4bbade9f47:g:aooAAOSwDw9bNqY0
The one at the connector, technically the connector is #C273A as per the GM manual. It is the wire that would run under the dash towards the driver side.
@@irwinhernandez5558 @ to be honest ism confused here, I’ve been told that ls pcm Wire goes straight to brown mil cluster wire, and it would work,, but on these video it shows just tan/black stripe wires,,,
91 GM obs trucks I really like them I just put 1982 Cadillac Eldorado rear disc brakes on mine , I just love those trucks there well built back in the day , it was a ranch truck here in Alberta Canada , and I decided to restore it, it was cheaper to restore the old girl then buy a new one ,this is what she looks like now .ua-cam.com/video/-BDUuHcDqW4/v-deo.html
Is the LS PCM the one you’re talking about at minute 1:10? Or where is your LS PCM
This is referring to the OBS pcm. The LS pcm is under the hood down by the battery. The OBS pcm is behind the glove box door.
What pin on the ls pcm did you use? You wired that one to the wire goin to the dash right?
C2 RED #46 is MIL on 1999-2002 PCM. That is correct. You really need a wiring schematic for your truck to make sure you have the correct wire, but in short, yes, it goes to the dash.
@@laurencevillegarage Thanks For the help. I have the same issue. I couldn’t figure out why it was still on.
Good morning, I've been watching your videos, I'm in the process of ls swapping my 1990 2wd ck short bed. What motor mounts did you go with? Thank you in advance..
Thanks for the question, I have used these for all my swaps....here is a link on Ebay: www.ebay.com/itm/325257699143?epid=1054660548&hash=item4bbade9f47:g:aooAAOSwDw9bNqY0
@@laurencevillegarage Thank you for the prompt response 👍.
After removing both wires which one goes to ls pcm?? The one from obs pcm? Or the one at connector?
The one at the connector, technically the connector is #C273A as per the GM manual. It is the wire that would run under the dash towards the driver side.
@@laurencevillegarage @ ok then that just goes hooked to the ls pcm mil light
@@gerardolopez5875 wich wire did you end up hooking up to the ls pcm? The tan wire or the dark brown wire coming from the left. (Dash cluster)
@@irwinhernandez5558 @ to be honest ism confused here, I’ve been told that ls pcm Wire goes straight to brown mil cluster wire, and it would work,, but on these video it shows just tan/black stripe wires,,,
@@irwinhernandez5558 @ ok, found out,, just dark brown/ white stripe , from cluster to LS pcm, and should work,,,
91 GM obs trucks I really like them I just put 1982 Cadillac Eldorado rear disc brakes on mine , I just love those trucks there well built back in the day , it was a ranch truck here in Alberta Canada , and I decided to restore it, it was cheaper to restore the old girl then buy a new one ,this is what she looks like now .ua-cam.com/video/-BDUuHcDqW4/v-deo.html
I agree, nice truck by the way. Thanks for watching and sharing your video.