SUPER CHEAP $80 ALIEXPRESS Wheel Hub Teardown | DT Swiss Ratchet Clone
Вставка
- Опубліковано 4 жов 2024
- I wasn't quite sure what to expect with this one. A viewer sent in a hub that he had purchased from AliExpress for $80 and delivered to his home in England.
This hub uses a very similar system to the DT swiss style hubs and has two ramp plates that take the place of the conventional ratchet and pawls.
On the whole it's not bad and for the price you would be very hard pushed to notice vs an expensive DT hub. The DT hub will be reviewed next week.
GET MERCH HERE!!! www.hambini.co...
Some of the equipment I use and recommend
*THE HAMBINI PENCIL OF CHOICE*
UK Kuru Toga Silver Edition amzn.to/3Y9azT1
US Kuru Toga Silver Edition amzn.to/3jryfmT
*THE HAMBINI HAIRDRESSER PENCIL - iT's PINK*
UK Kuru Toga PINK Pencil amzn.to/3VD5wsj
US Kuru Toga PINK Pencil amzn.to/3Hwthx8
*TOOLS*
Wera Allen/Hex Keys
UK amzn.to/3CdPazi
US amzn.to/3wRG1cD
Wera Screwdrivers
UK amzn.to/3WGqOFS
US amzn.to/3HX6KLu
Mitutoyo Digital Calipers
UK amzn.to/3Gq9Nv6
US amzn.to/3E5v4Zh
Mitutoyo Feeler Gauge
UK amzn.to/3Gq9Nv6
US amzn.to/3X4rmp4
Some of these links may be affiliate links for which the channel gets a small commission, the price remains unchanged.
----------------------------------------------------------------------------
Hambini Website www.hambini.com
Facebook / hambinieng
Instagram / hambinieng
If you would like to support the channel for more unbiased reviews, you can do so on Patreon. / hambini - Спорт
I really appreciate this type of content - demonstrating that cheap doesn't mean bad. However, I would point out that for the average buyer, Aliexpress is a literal minefield - it is very difficult to distinguish between cheap-bad and cheap-good, and it's not uncommon for lesser-known Chinese brands to counterfeit better-known Chinese brands. Would be great if at some point you could source a few similarly-priced components from there, compare quality, and let us know your thoughts on what to look out for as a potential shopper.
i bought a cheap chinese stem when trying out different sizes... looked great, beautifully machined EXCEPT the only 2 surfaces that need to be flat and parallel, were not 🤣
That's my fear! You could buy 5 allegedly identical items on there and get 5 clones of varying quality
@@f00bert24 The person behind that channel has links to marketing departments of some Asian brands. I would trust in his impartiality about as much as I would trust a Trek marketing rep talking about Bontrager products, hahaha. Edit: Looks like this person deleted their comment. It was about China Cycling.
@@Lacking_something Sometimes they're not even copies! I've bought duplicates of things for me and my partner at the exact same time, in the same order (i.e. lights, bar bags), and received two items that you can tell came from completely different production lines. It's not uncommon for these production changes to go unannounced. What I believe happens is one factory will make a limited production run of an item, it ends up being very popular and sells out, sellers want more but the same factory/suppliers cannot be lined up, so it's sourced elsewhere...either for budget reasons (the Far East mindset of build it as cheap as possible) or just factories/suppliers no longer producing those specific items. The bottom line is if you like something, buy another ASAP, because you probably won't find the same thing in same quality again.
Bitex is the oem for these hubs .. can never go wrong with them.
For most of the people Chinese hubs are absolutely fine. It is the middle ground between garbage you get with factory stock builds and competition level DT 240/350.
Got one of those. I'll do a review after 2-3K because there's not much you can say about when it's brand new.
My experience with 240 hubs - road bikes are fine. Will last longer than the axle standard they were built for. But if you are mountain biking - you can trash them in a month of daily hammering at Whistler…
Curious what broke on your 240 hubs on MTB? In my experience they've been solid, although I mostly use 350s.
@@workshopninjathe1st huh? What are you taking a sledge hammer to them?
I’m a 250 pound rider and rip on the dt240 hubs without any issues for many years! Over 5000 miles up and down!!! Not a single problem!!!!
Can you do a hardeness test on the ratchet components and the hub body on this hub and the DT hub when you get it?
The structure of the hub is almost identical to the new DT 350. The only difference is the "nylon washer", which is a spring in DT350. It's worth noting that all bearings in DT 350 are standard sized, while in 240 EXP, they are 15 x 26 mm. The price for DT350 is around 200 EUR per pair, and I think this should be used in the comparison, not 240 EXP. If you remember, DT recently had a recall of the early models of EXP hubs, because the surface treatment of the ratchet was not done correctly. Even DT itself can make such mistakes, I wouldn't voucher for the unheard manufacturer. I'm very looking forward to your video about the DT hubs next week!
the new DT 350s look like a great deal if someone wants a decent ratchet hub with none of the bling of the more expensive brothers. you do pay some of the DT-tax, but get the peace of mind that spare parts should be available unlicke for any other noname clone hub. and theres a classic+centerlock version of the DT 350, any aliexpress clones I found are either straightpull+CL or classic+6 bolt.
I have the Ztto and Goldix hub on two sets of wheels for over a year. The hub itself is great, but the bearings will only last for about a year. If you’re fine in replacing the bearings then these hubs are a very good deal. I also got the Ztto 54 tooth ratchet and it held up so far.
Impressed by a new investigative microscope/camera… provides great details and analysis as always…
Faffing about with my RC stuff and get a Hambini alert! A welcome break😁 *turns volume down, hits play🤪
Just fitted my Hambini BB this week, something so immensely satisfying with that first crankset spin afterwards!
To be fair - for the price those runout numbers are f@&$ing amazing.
I somehow doubt DT would be much better - but it will be interesting to see a similar inspection of the 240 hubs.
Nice work
Yeah, I concur. You might worry about that runout on a high speed machine spindle, but for a bike hub running under 60rpm... For context, the standard linear tolerance for CNC parts is 0.005" (0.127 mm).
@@genixia 0.127mm? Maybe for some wood cheap cnc. Typical tolerance is under 0.01mm easily with typical low end cnc like haas.
@@j2kub the standard machining tolerance isn't the same thing as what any given machine is specified to achieve when new.
Even if it were, the average machine shop has no way of measuring 0.01mm repeatedly anyway.
i appreciate the time u take making these videos for us. u truly help people make informed decisions, that saves us time and money. again, thank you.
I’m drunk as hell and gotta go to work but at least Hambini uploaded
THE PEN IS WORKING!!!!🥳🥳🥳
The Pen is working HARD!!!
I bought a ZTTO labeled set a year ago and built them up with DT rims. The body of the hub is perfectly fine. 54t ratchet lasted 200km and was replaced by a DT 18t part. Bearings ran dry fairly quickly, they've been repacked but the rear has minor play. Probably should have checked them before the build or simply replaced them. However for the price, even if you need to switch out the bearings & ratchet, they're a good deal.
it seems comments are being removed at random - could you please elaborate on that replacement?
genuine DT ratchet looks stupidly expensive - any hints ?
@@cthulpiss i had a spare set of 18t plates in a wheel set that got an upgrade to 36t. They fit 1:1.
I had some cheap chinese (cart bearing) hubs and they were great. ended up putting them on my mates bike and they've lasted quite some time without issue!!
I had the same problem with 54 tooth rachets on a Ztto. Just like you I replaced them with an original 18 tooth one and they work fine so far
I've had these ZTTO ones too. Pretty good for the price. Just replaced bearings and ratchet tooth to the ones used in DT. Works fine even after 1000kms now.
Sorry to add to your reading, I could not find any comment below on the hub bearings not contributing to carry the weight of the bike. I changed from freewheel to freehub as the axles kept breaking because the freewheel bearing is so far inboard. Axle failure would be an issue with this design of hub, however the axle is compressing the hub and therefore the inboard wheel bearing is likely to transfer considerable load to the adjacent hub bearing, the axle is compressing the whole unit therefore transferring load to the hub bearing next to the dropouts. (I have a shimano tiagra 4600 rear hub, which -as you said- have an internal hollow bolt to fix the freehub to the wheel, so it does not have the separate inboard bearings, but the principle is the same to transfer the load to the bearing next to the dropout and avoid fatigue fracture of the axle)
Small correction: "No need for DT tools" The drive side hub bearing is located behind a part that requires a dt type tool to take off (similar to a cassette lockring tool). It can be a huge hassle to get off because it tightens over time.
I’ve come across exactly this issue now, if I can’t get it off with the help of a vice then it’s going on Facebook marketplace as spares/repairs 😂
This will dissuade me from any DT rear hub.. the pawl seats are getting beat in my Hope Pro 4 hubs but they hold all 2kw + my feeble legs power and are really easy to service.
At least on the pre-EXP hubs you can pull the bearing out without removing the tooth ring, the teeth are just a fraction smaller than the bearing OD
@@BenjjjDW When Mapdec Cycles compared DT hubs with Hope I think they said they used an impact driver to take it apart.
Heat the hub up a bit and the ratchet ring comes out pretty easy. Otherwise yes, it's incredibly difficult.
In Alberta, Canada many of us use DT350's for Fat bikes as most more normal hubs explode under the load of super low gearing and snow load going up steep climbs, pretty fast. I've never been able to figure out why DT hubs are so strong, I think its perfect machining quality on the drive ring and axles, more then the star ratchet, but maybe all those teeth help distribute torque? neat that there is a copy in China that looks almost the same, only time would tell if it could stand up to the abuse of high torque applications.
I think you've nailed the reason why the DT's don't fail under high torque: those ratchet rings utilize 360 degrees of internal hub splines to transfer a rider's pedalling power compared to what? 4 pawls on a traditional hub's freewheel each mating with single, tiny (aluminum?) teeth on the hub body. On some hubs the pawls are offset to increase POI's so, there, they can't even all engage simultaneously when pedalling.
I've had a pair of Goldix hubs for almost a year.
A common procedure for these lightweight chinese hubs here in Russia is machining a high precision axle for the rear hub to maximize strength. I had it done as soon as it arrived, it's been been through several xc races and a lot of jumps and stairs, going strong
Its hard to justify the time to lace a new wheel (for me, takes a while anyways) with a hub that could break drive axle in half (done this) or spin the drive ring out of the threads (done this too) or break the little pawls off (also done this) when, the new 350 classic hubs are less expensive then they used to be. But for a lower demand application, and maybe if you could get a steel axle, could be a real deal, I see the pair of hubs for like 120$ Cad, which is pretty cheap, I've learned, when a hub is lighter, probably gonna S-plode, where heavier hubs tend to last longer (i9, Hope, DT, Onyx) Really interesting review on the parts though.
Yeah that makes sense. Fat bike hubs are wide too and wimpy 142mm spacing axle thicknesses on 200ish mm wide fstbike spacing don't cut it.
And if you think about metal shrinkage in cold weather, 4 pawl systems may suffer more than 18 teeth of ratchet engagement.
@@BenitoAndito I hadn't thought about metal shrinkage on pawls, we ride often enough at -10 to -23c or so, most everyone has blown up pawl hubs or ripped aluminum axles in half (anyone over about 170lbs or so anyways) but I've broken standard hubs on my summer bike too (24x51 gearing and 22x42 on fat bike) anywho, DT makes a reliable hub, fat bike hubs are often just upsized regular hubs, no more bearings, just more load, eekers!
Great kid friendly video to watch with the grandkids.
These go together very much like a set of DT hugi hubs I have from around 1993, standard bearings and no special tools! Exactly the same ratchet mechanism.
Can't wait to see the run out comparison between these hubs and the DT hubs
6:01
In order to disengage the ratchet, we just need enough debris and grease built up in one of the teeth.
Realistically speaking, conventional ratchet systems consist of multiple ‘independent’ ratchets that always maintain engagement even when one fails.
Just by looking at this two-piece ratchet system, I’m concerned of sliding failure on the side near hub.
I've got two wheelsets with these hubs and I use pillar spokes with no rub. I've changed the ratchets to 60t from the standard 36t that's all. I have noticed that the hub has a lot less markings from the cassette than other brands.
Do you happen to know where I can find freehubs for these hubs? I would like to be able to switch to xdr or MS if I need to in the future.
@@hightechhighlander I don't but I'm sure there'd be ways to get different freehubs.
Been really looking forward to this one
Potential topic for future video;
Pole (Finland) MTB frames. Which are made of two CNC milled halves then glued together. Would be interesting to hear about whether there is any merit to this unorthodox construction.
All he will be able to tell you is an engineering review of the method on paper. He doesn't mountain bike and wouldn't know the typical life expectancy of mtb products. Pole had a blow up a few years back but eventually grew some humility and took the punch on the chin. They've since redesigned their process and the frame of issue (Pole Stamina) and from what I can tell it seems to have exceeded test marks (EFBE Prüftechnik GmbH in Germany did the test cycles, so no mysterious Portuguese university). It seems their tests go beyond ISO. I wouldn't be worried about frame durability. I'd be more worried how it feels riding since ISO is so overblown for what a bike needs to be able to endure.
80 eurod aint cheap for a hub, thats the normal price a hub should be.
You get a set of Deore or even XT hubs (ok, these are no roadbike hubs) for that money, which are surely no bad hubs
Longevity and quality of the metals used are what’s usually in question with Chinese products. Some lower end hubs on Ali seem to be made Swiss cheese.
I have a similar knock off hub... not to shabby for the price... takes DT Swiss ring gears as well and i have upgraded mine to a 60T engagement one...
As a DT Swiss hub fan (the 240s) this was an interesting one. It’s not a direct copy of a 240 and it’s not a direct copy of the new EXP hub… it’s something in between… and that worries me.
What makes the 240 reliable is it has 2 independent ratchets backed by 2 springs, this allows some play in the system and resistance to vibration while maintaining a reliable mode of engagement.
The newer EXP only uses 1 independent ratchet and 1 fixed (screwed into the hub) this system is less reliable and last year DT had a big product recall because of this. The ratchets need to be perfectly Machined, any deviation and they slip with devastating effects!
So with this Knock-off hub having a design that sits somewhere in between I’d be very interested to see how reliable it’s going to be. Yes the DT hubs are very expensive, but in my opinion there is nothing better on the market and at least you get a decent warranty on their products, a warranty that almost nobody ever needs to use.
If the workmanship of these Chinese hubs improve I’d definitely be interested. And I even suggested to Winspace they copy the DT hub system now DT lost the rights to it.
By the way, another hub that only have 3 bearings is Mavic as they use a Nylon bushing at the bottom of the hub body. Not a great design (too much play in the hub of when under load) but cheap to make.
Nice microscope 🔬 by the way. 🙂
All the best! 👍🏻
I got a set of DT240 and it doesn't feel any different normal hubs, but then they still ride like that after 5 years, 0 mantenience.
Tektros are destroyed, shimanos are gritty, novatecs have needed mantenience... but DT.
It rolls just as smooth as ever.
DT is doing something right, and DT350 are my to-go touring hubs (the old ones I don't know about EXP)
I am curious about these knockoffs to be honest.
I've been happy with Novatec, but could that possibly be better given they copied DT design?...
You said that DT swiss lost the ratchet patents rights? If is the case, then we are going to see a lot similars design on the market. Thats good, more competition.
@@matiasbenavidesdigitalvisu9511 yes bad news for the future of DT, good news for us. As a business owner I’m a little sad for them, as people start to find the cheaper hubs you might see that historic company die…🫣
@@matiasbenavidesdigitalvisu9511 Yeah its why we've had an explosion of chinese star ratchet hubs in recent years. Great for us normal folk
@@egonzalez4294 my novatec hubs started making terrible sounds after I got caught out in a surprise rain storm. I will never use novatec again, but they did work fine before they got wet.
I’m waiting for my Ryet Wheelset with these hubs. And now I'm a little bit more relaxed that not everything is crap on those. However, 270€ + VAT was an absolute no-brainer in my opinion.
good wheels?
No chance the DT review will be this good.
Another fascinating video…value for money!
Good quality bearings and well built spokes and DT R500 rims produce a reliable low cost reasonably light wheels.
waiting for DT hub review!!!
I had a hambini on rye with swiss cheese the other day.
They're going to wear in! Give them to your cousin for the summer and then take them back.
When you add up the cost of good bearings and a new DT ratchet, you might as well buy a set of 350s. What we can't see is the metallurgy. I doubt the metallurgy in the axles, bearings, and ratchet.
Great to see! I've got a set of ryet rim brake wheels, they are really good for the money. Terrible braking in the wet apparently but I'm a sunshine only rider! The free hub on mine is traditional pawls
Many thanks for the informative video, in ali express I see goldix hubs with the same price and I wonder if they have similar qualities , and they have a titanium freehub upgrade I wonder if they are better , many thanks again Hambini aged 5 from your fans aged 4 😇
Hambini looking at dark inner splines and brown stuff through a magnifying lense. Interesting prospect.
Sweet! Now I can maybe find a 54tooth variant cheaper than the 54t DT Swiss ratchet upgrade, and get two free hubs as a bonus
Good review. FWIW, the RYET cassetes 12sp are really good as well. Much cheaper dan Dura Ace or even Ultegra, and they are even a few grams lighter. Besides the sprockets are attached to each other so the cassette will not damage the free hub. Recommended!
Well done
Spoke angles on wheels is usually refered to as DISHING. As it resembles a dish!
Any thoughts on the bearings they provided?
You find these specced as options on my Chinese wheels. They’re perfectly fine.
unfortunately very often these dt clones miss the second metal lip on the freehub body, so the sealing is compromised, not labyrinth anymore
Very happy with Ryet carbon wheelset built with ryet ratchet hub. Nothing to complain. Great for the value.
Any update on how these wheels have been? I just got a pair. Thanks.
Looks fairly similar to DT Swiss as you say, I believe the DT ones have the spring on the other side towards the freehub body and the inner ring is fixed in the main hub body. Looks a bit more "simple" than the DT one e.g. the spring on this is much thicker and the spacer a bit larger.
Concerning the machining of the ratchet-rings, I´d like to remind that DT had to make a recall on the early ones they made. The reason for this was, if i remember correctly, that the plates / teeth weren´t 100% perfect and somehow could cause the hub to constantly freewheel / teeth didnt engage anymore. They had to remake this part and replaced it for free on the faulty batch. Havent heard of any issues since then. So I´m not sure on how well this one is going to hold up given the fairly cheap manufacturing in some areas.
This is the new DT EXP hubs. The older non-EXP has springs on both sides of the ratchet.
Even simpler would be an Extralite copy - ratchet teeth machined directly into the freehub. One aluminum ratchet in the hub body.
@@JulianKent ... and it's bomb-proof 😀
@@JulianKent newer EXP has one set of teeth threaded in as fixed.
Can you also review those aliexpress ceramic bearings?
When you're sending your technology to Ch1na for manufacturing you have to expect it to come back rebranded and cheaper.
It's amazing how many European car companies are now owned by the people who started out as cheap Cinese labor for the same company. I suspect the bike industry will go the same way.
I got a 6”t upgrade from this company for my 350 hub, lasted less than 10 miles before the tips of the teeth sheared off, to be honest I’ve heard this happen to 54 tooth dt upgrades and I weight 210 and like to mash, but my guess is the tooth profile or heat treat were not right
Thanks
Cool. But can't find that dt swiss teardown.
Interesting DT Swiss copy blending both DT Swiss 350 and DT Swiss Ratchet Exp features.
Front hub is pretty close a direct copy of the 350 hub.
A couple of questions, who makes the best freehub and what's your opinion on the Hope pro freehubs?
Hambini can you ream the new Specialized Epic 2023
They look very similar to Cannondale Hollowgram (Formula) hubs.
i guess warrenty is an issue right? if its worth much more for the DT, i dont know. the only thing stoping me to get such products is the safety. do you think is there any safety concern regarding hubs? im not sure if going downhill by 70km/h i would like my hubs to crack...but i have no clue about its engeneering... cheers mate, your videos are great
Great vid. Could the ratchet gears be made of lesser quality material, then DT Swiss? I’ve seen some vids of other less expensive hubs, where the engagement ramps wore down prematurely. I appreciate your breakdown and explanation.
That look under microscope is like marriage 20 years later....
Excellent review; very interested in the Dt Swiss hub review. Is it coming up anytime soon?
You should review ztto components sometime, Ali express too but they make some exceptional value components
ztto makes the same hubs. I have two sets, the v1 and v2, the first ones they screwed up the spacer machining. Both had an issue with the spring inside eating up the spacer. Maybe they fixed it by now.
The weakness for these hubs is the bearings. After a year, check on them. Like Hambini has said, standard ISO bearings. Stock up on NTN 6902 and 6802. Replace them after a year if needed. I have 2 sets. The older 24/24 centerlock brake set and 20/24 rim brake which they don't make anymore. They run fine on the gravel bike and road bike. Only exception is these were dual springs instead of spring and nylon washer.
I don't see that as a big issue, as they are standard bearings, you can easily replace them with high quality bearings and still come out cheaper than dt swiss
Are you sure the issue is the bearings and not the quality of the seals? On well sealed hubs if you open them up you'll see no dirt or water ingress at all, specifically on the front. Rear is a lot harder to seal.
@@jaro6985 Its the bearings. Not great stuff. They have to cut some corners for that price somewhere. This is the newer version with that nylon ring instead of 2 springs. 2 springs vs 1 spring. In mass manufacturing, saving 2 cents goes a long way.
They seem like a great deal, I suppose when you don't have to design a product you can make it cheaper.
Ja! Das RD ist Der größte Teil der Kosten des Rades
@@drwatchbreaker2914 No. For western brands it's the marketing department that takes most of the money.
"You have a DT hub coming in next week"........I know they are like....."uh-oh"!!!
Thinking of buying Ryet wheels with these hubs or elite Edge with similar hubs.
Sir , Ratchet vs Pawls , what hub type you personally prefer sir❤
Disc BRAKES!
DT Swiss want 80 Euros for the ratchet upgrade kit btw. You want 54 engagement points instead of the stock 24? Thats about 1,60 Euros for EVERY extra tooth or a big go fuck yourself to the customer. As far as I can tell these parts are only sintered, so no machining involved. Making a 24t vs a 54t takes pretty much the same effort.
I heard you will lose the warranty if you do the upgrade yourself. So those fuckers came straigt off my MTB and I bought a pair of Hopes.
Edit: They give you a tube of "SPECIAL GREASE". I guess it's worth it after all...
LoL. Gweeese for my behind. LoL BTW I used the DT gweese on these Chinese ratchets. Usually they come dry to really make that buzz.
12:12
If it’s done properly, its steel forged, then shot-blast (therefore that rough surface), then lathed (therefore the ribbed machined surface).
I’m just concerned if they cut corners by molding. Just guessing.
I doubt it's cast. i wouldn't be able to tell unless you destroy it.
What about the thickness of the material around the spoke holes? It this any more or less than established brands? If there is not enough meat there, then cyclic fatigue around the hole can become an issue. I've seen the metal around the spoke hole tear off from the hub body.
bought one for around $55 here in the Philippines
Perfect content mate thank you. Any advice on what a reasonably cheap hub would be to build a wheel upon? First time wheel builder, I just want to build a wheelset myself to practise dishing and trueing.
Hello,
Could you share a way to measure the offset ? Thanks.
Question: Is this basically what I'll get if I buy a 9velo wheelset? (The cheapest rim brake model where you don't get an option for number of ratchet teeth). And if so, would I be better getting that or the old model of giant slr1 for the same price (the giants are quite narrow in comparison 17mm internal, 22mm external)
I've looked at those hubs before and I'm sure they can help some but consider this : the ratchet are known to be not very reliable and the bearing will probably need à swap pretty quickly. So 55 for the hub about 40 for a dt ratchet and about 40 a bearing set. That's 135, the price of a DT350.
The flats on a DT ratchet are angled very slightly so the rings pull together when engaged. Do these knockoffs have this too? It doesn't look like it from the video, can't be sure though
Not sure what you mean?
@@Hambini the engagement surfaces of the ratchet rings aren't perpendicular to the face of the ring, they have a small amount of acute rake. When the rings engage, the opposing rake pulls the two rings together ensuring complete engagement
(which would be a slightly more difficult machining step...and a subtle change)
Did you check the hardness of the drive ratchet ?
Hambini, I'll play devil's advocate here. The big thing is going to be the heat treatment and temper for the drive ratchets. For the price, I would not expect that to be done as well as a much more expensive hub. Also, the bearings. Bearing come in a wide range of quality (durability) and it's not likely the best quality is used in this hub. You say DT use a non-standard bearing size. Likely that's for a considered engineering reason that makes the hubs better in some way. Otherwise, why do that? And then there's the machining. There are many, many critical tolerances around bearing alignment that Hambini can't measure without removing the bearings. These alignments will affect bearing life and, to some extent, performance. There's definitely some good stuff here, but is it really the equivalent of the DT hubs they're modeled after? Probably not even close. The machining itself tells you that the manufacturer isn't going for that . As for the question "are the DT hubs worth the money?", well that's fairly subjective. Most of the the money you're spending on a DT hub is paying for something that has been engineered, not something that's a copy of an engineered product and built to meet a rock bottom price point. You wanna buy hubs that'll last many trouble-free years with little to no maintenance? DT is a good choice- just read through the comments below. Wanna roll the dice on hubs built to sell at the lowest price possible and still "look" like DT hubs? In my opinion that's a valid option depending on what your goals are, but don't expect the same kind of quality and durability or warranty support when they go south on you. Great channel, man. Keep up the good work.
Hi Chad, A well-considered and well-written comment. I love Hambini's videos for Mr. Hambini's thoughts and opinions. I also love them for the quality of the comments by his viewers...such as you. Take a bow. 👏👏👏
On most hubs the things that wear out are the bearings, if you get dt hubs, you end up with dodgy sizes. I would go with the copy purely for that reason. I think a clone with decent bearings is superior.
@Hambini i just checked, the dt hubs are all 6802 and 6902. Am i missing something?
@@Cheruzan No you are not, standard size bearings for axle and freehub. Also he presumed that the orange external contact seal would be replicated on the inner side but that is a presumption and on my Chinese copy for example, the inner is a black non contact seal.
It's too bad these don't seem to come with normal flanges. Those straight pull flanges and the need for special spokes is a PITA.
One thing to note is the quality of the ratchets. I've built a wheel with these hubs(version based on the classic DT system) and had a complete failure of the ratchet teeth very soon. This will cause you to suddenly lose pressure on the pedals, fortunately I "only" scratched one leg badly and did not fall. I got/get completely ignored when requesting assistance (they mention a 2 year warranty on the ratchets). Good thing is a replacement with 18t DT original ratchets is a few second job and cheap since many people sell them off after upgrading to 36 or more count ratchets. I would not buy again.
When you say you built a wheel with these hubs, do you mean the ones shown in this video specifically or an older version? I'm wondering since the DT 18T ratchets are not hollowed out on one side like the ones in these Ryet hubs, which could cause compatibility issues.
@@threelegcatkungfu an identical hubset. I'll try to find the old ratchets, basically the teeth just all sheered off.
@@sanderscholtens391 That's not reassuring as I own a pair of these hubs. Comments are saying "well everything is great except the bearings"... Now I'm thinking even the ratchets are a bit dodgy. Perhaps I should just pre-emptively replace them with a pair of DT 18T ratchets.
@@threelegcatkungfu I would recommend that based on my personal experience. It's cheap and easy. That's also why I'd not buy again. By the time you've replaced bearings and ratchets the DT 350 are not far off anymore.
Ryet gravel wheels Test please!
also ordered their 55mm wheels dont know if they will be good
Moar AliExpress hub reviews/reamings plz. And if you can chuck in some e/mtb ones, I'll be even happier.
EDIT: Oh yeah, and weights plz
Hey Frenchie, tell Tyrone I said hello.
One question. Can rear hub be paired with XDR DT SWISS RATCHET freehub?
Can I replace with 60t dt swiss ratchet??
2 comments:
-chinese hubs are cheap just because they copy dt swiss patented hubs
-the real problem with this type of hubs is the ratchet system surface, if it wears the ratchet doesn’t work anymore and you risk your life. Dt swiss had a serious problem with this and they had to recall all the ratchet exp hubs. You said that the ratchet lateral surface in this hub is rough but this is not a problem, I disagree
I wonder if any wheel builders would be happy to use these hubs? Not many people have the time/skills to build their own.
I think they are much better than some of the novatecs
We built a set last week into a Chinese carbon rim, a Princeton Carbon Works knock off, no issue's at all. Tension was easy to even out, built up fine. Supplied dimensions were good, spoke calculation no problems.
@@Skelf71 was that as a test or was it sold to a customer? I think branded Chinese goods will become mainstream, bought from the manufacturers. However AliExpress sourced items would be too much of a liability for wheel builders to put their name/warranty on.
@@Lacking_something It was for a customer who supplied the hubs and rims for us to build. We built with DT Aerolite spokes. We have done a few for this customer who buys heaps of knock off parts just to see if they are any good. So far most stuff has been fine. Heres a video of a set from a few years ago ua-cam.com/users/shortsudMC9oOWW_o
@@Skelf71 good to know! Can you do mail order? I want some 35mm ish rim brake climbing wheels. Happy to use Chinese parts! I'm only 65kg which helps!
Teardown on super cheap avian wheelsets!
how does it look like 7### series ally? surely you cant tell just by looking at it. this is one area where i would expect them to cut corners
also looks like they are using a near net shape for the blanks to reduce machining, if casting they wouldnt use 7### i think and i doubt they would bother forging the blank
6000 series tends to machine better, you can see the very fine marks under the microscope.
@@Hambini from my experience 7075 machines alot nicer than 6061
specifically, its less gummy and therefore more likely to not leave a burr (like seen in the vid)
@@muzzarobbo my personal thought is the exact opposite. But I suppose machining is a preference
Be aware that straight pull hubs have fixed spoke patterns, choice of rim is so much more important than with J Bend Hubs.
I see so many straight pull wheels that have poor spoke alignment at the nipple / rim end, this does lead to premature spoke or nipple failure and occasionally cracking of the rims spoke holes.
I now, will not build with customer supplied straight pull hubs.
I have had the opposite experience. J Bend spokes always break at the flange (ie at the bend). Never had an issue with straight pull, and I think that's the general consensus as the same manufacturer will use jbend on their low end models and straight pull on their higher end.
@@michaelcheng6469 the problems with poor spoke alignment will be at the rim end, spokes breaking at the head or bend is usually metal fatigue and happens with both J bend and straight pull.
I am sorry but the blanket doesn't quite cut it
What kind of regular grease can i use for the pawl system in my hub? And are expensive grease for rear hub systems so important?
U have ranked carbon ti as the best hub. But in terms of practicality there is no difference if we are time trialing and simply place ntn bearing?
It makes no real difference once it's locked, you are spinning on 4 bearings
You should do the fake dura-ace wheels 😂
No comparison on the weight?!
How can you tell what grade aluminum just by look and feel? I was trying to figure it out on some of my parts but want to get it right and test myself. Why? I'm a dork and curious. And my pen works.
Can you suggest a hard wearing free hub for shimano as I find the current ones soft
i might be wrong, but arent all of these ratchets sintered?
should have compared it to a 350, not 240.